Fluke 73 Manual

Fluke Multimeter 73

Læs gratis den danske manual til Fluke 73 (12 sider) i kategorien Multimeter. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Fluke 73, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Series III Multimeter

Instruction Sheet

Read First: Safety Information

W To avoid damage to the meter, electric shock or injury:

• Never use the meter if the meter or test leads look damaged.

• Be sure the test leads and rotary switch are in the correct

position for the desired measurement.

• Never measure resistance in a circuit when power is applied.

• Never touch the probes to a voltage source when the test

leads are plugged into the 10 A or 300 mA input jack.

• Never use the meter on circuits that exceed 4800 volt-amps.

• Never apply more than the rated voltage between any input

jack and earth ground.

• Be careful when working with voltages above 60 V dc or 30 V

ac rms. Such voltages pose a shock hazard.

• Keep your fingers behind the finger guards on the test probes

when making measurements.

W Warning

To avoid false readings, which could lead to possible

electric shock or personal injury, replace the battery

as soon as the low battery indicator (M) appears.

Symbols

WCaution: Important Information. See instruction sheet.

MAN Manual Range.

TDouble Insulation.

MLow battery. Replace battery.

CAT II Overvoltage Installation Category per IEC 61010-1-95.

CAT II instruments protect against transients from

equipment supplied from the fixed installation, e.g., TV,

PC, and household appliances.

PN 1646063 February 2002 (English)

 1 97, 1 98 00 F uke o p rat on. r ht r se e . r nt d n9 9 , 2 2 l C r o i All ig s e rv d P i e i China.

Terminals

300

10A

FUSED

600V CAT

COM

Milliamps

Amps

Volts, Ohms, Diode Test

Common Terminal

hr2f.eps

See Specifications for overload protection.

Pushbutton

Use the pushbutton to either select a fixed range or put the meter

in the Automatic Touch Hold mode.

Autorange

The meter defaults to autorange when first turned on.

Manual Range

Manual ranging is available in V ac, V dc, ohms, A ac, and A dc.

The manual range mode and Touch Hold mode are mutually

exclusive. is displayed when the meter is in the manualMAN

range mode.

Momentary

MAN

hr14f.eps

To return to autorange, press for 1 second or change theR

measurement function.

Produkt Specifikationer

Mærke:	Fluke
Kategori:	Multimeter
Model:	73

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluke 73 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Multimeter Fluke Manualer

2 August 2025

2 August 2025

1 August 2025

9 September 2024

9 September 2024

2 September 2024

30 August 2024

23 August 2024

23 August 2024

Fluke a3002 FC Manual

22 August 2024

Multimeter Manualer

Nyeste Multimeter Manualer

Megger BMM2500 Manual

11 Oktober 2025

Megger DCM330 Manual

11 Oktober 2025

Megger DCM310 Manual

11 Oktober 2025

Megger DCM1500S Manual

11 Oktober 2025

Megger DCM300E Manual

11 Oktober 2025

Megger MET1000 Manual

11 Oktober 2025

Weidmüller Multimeter 125S Manual

7 Oktober 2025

Weidmüller VT Digi Pro Manual

7 Oktober 2025

Metra Install Bay 3320 Manual

5 Oktober 2025

HT Instruments Ironmeter Manual

3 Oktober 2025