Fluke 77 IV Manual


Læs gratis den danske manual til Fluke 77 IV (22 sider) i kategorien Multimeter. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Fluke 77 IV, eller vil du spørge andre brugere om produktet?

Side 1/22
September 2006 Rev.1. 11/15
© 2006-2015 Fluke Corporation. All rights reserved.
1
Model 77 Series IV
Digital Multimeter
Calibration Information
Introduction
XWWarning
To prevent possible electrical shock, fire, or personal injury, do not do the
performance tests or calibration adjustment procedures unless qualified.
The information provided in this document is for the use of qualified personnel
only.
This document provides the information necessary to adjust and verify the performance of the Fluke
Model 77 Series IV Digital Multimeter (hereafter known as the Meter or Product).
The following information is included in this document:
Safety Information (page 2)
International Electrical Symbols (page 3)
Test Lead Alert (page 3)
Specifications (page 4)
Testing and Replacing the Fuses (pages 7 and 8)
Replacing the Battery (page 8)
Cleaning (page 9)
Replacing the LCD (page 9)
Performance Tests (page 10)
Calibration Adjustment (page 14)
Replaceable Parts and Accessories (page 17)
Complete Warranty (page 19)
See the Model 77 Series IV Users Manual for complete operating instructions.
Service Information
To contact Fluke, call one of the following telephone numbers:
Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-6714-3114
Singapore: +65-6799-5566
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual supplement, visit http://us.fluke.com/usen/support/manuals.
Model 77 Series IV
Calibration Information
2
Safety Information
Warning and Caution Statements
A XW Warning identifies hazardous conditions and actions that could cause bodily harm or death.
A W Caution identifies conditions and actions that could damage the Meter, the equipment under test, or
cause permanent loss of data.
XWWarnings
To prevent possible electrical shock, fire, or personal injury, or damage to the Product
or equipment under test:
Use the Product only as specified, or the protection supplied by the Product can be
compromised.
Do not use test leads if they are damaged. Examine the test leads for damaged
insulation, exposed metal, or if the wear indicator shows. Check test lead
continuity.
Use the correct terminals, function, and range for measurements.
Do not use test leads if they are damaged. Examine the test leads for damaged
insulation and measure a known voltage.
Do not apply more than the rated voltage, between the terminals or between each
terminal and earth ground.
Do not touch voltages > 30 V ac rms, 42 V ac peak, or 60 V dc.
Disconnect power and discharge all high-voltage capacitors before you measure
resistance, continuity, capacitance, or a diode junction.
Do not use the Product around explosive gas or vapor.
Keep fingers behind the finger guards on the probes.
Remove all probes, test leads, and accessories before the battery door is opened.


Produkt Specifikationer

Mærke: Fluke
Kategori: Multimeter
Model: 77 IV

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluke 77 IV stil et spørgsmål nedenfor, og andre brugere vil svare dig




Multimeter Fluke Manualer

Fluke

Fluke 283 FC Manual

9 September 2024
Fluke

Fluke AM-510 Manual

9 September 2024
Fluke

Fluke 77 IV Manual

2 September 2024
Fluke

Fluke 81438 Manual

30 August 2024
Fluke

Fluke 111 Manual

23 August 2024
Fluke

Fluke 1587 Manual

23 August 2024
Fluke

Fluke a3002 FC Manual

22 August 2024
Fluke

Fluke 117 Manual

22 August 2024
Fluke

Fluke 83 V Manual

21 August 2024
Fluke

Fluke 115C Manual

20 August 2024

Multimeter Manualer

Nyeste Multimeter Manualer