Fluke i30s Manual

Fluke Måleudstyr i30s

Læs gratis den danske manual til Fluke i30s (10 sider) i kategorien Måleudstyr. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Fluke i30s, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

PN 2560394

March 2006

i30s/i30

AC/DC Current Clamps

Instruction Sheet

Introduction

The i30s AC/DC Current Clamp has been designed for use with

oscilloscopes and DMMs for accurate, non-intrusive

measurement of both AC, DC, and complex waveform currents.

The i30 AC/DC Current Clamp has been designed for use with

DMMs only. Using advanced Hall Effect technology the i30s can

accurately measure currents with a resolution of 1 mA from 5 mA

to 30 A over the frequency range of DC to 100 kHz. These

features make it a powerful tool for use in inverters, switch mode

power supplies, industrial controllers and other applications

requiring current measurements and/or waveform analysis.

Symbols

The table below lists the symbols used on the product and/or in

this manual.

Symbol Description

~ Do not dispose of this product as unsorted municipal

waste. Contact Fluke or a qualified recycler for

disposal.

W Important Information. See manual.

T Double insulation.

- Do not apply around or remove from the HAZARDOUS

LIVE conductors.

) Conforms to Canadian Standards Association.

P Complies with the relevant European standards.

Safety Instructions

Please read this section carefully. It will make you familiar with

the most important safety instructions for handling your product.

In this instruction sheet, a Warning identifies conditions and

actions that pose hazard(s) to the user. A Caution identifies

conditions and actions that may damage the calibrator or the test

instruments.

WW X

XX Warning

The i30s and i30 may only be used and handled by

qualified personnel. To avoid personal injury, follow

these precautions:

• To avoid electric shock, use caution during

installation and use of this product; high

voltages and currents may be present in circuit

under test.

• Do not use the product if damaged. Always

connect probe to display device before it is

installed around the conductor.

• Always ensure the probe is removed from any

live electric circuit, and leads are disconnected

before removing the battery cover.

• Use the Current Probe only as specified in the

operating instructions; otherwise the current

probe’s safety features may not protect you.

• Adhere to local and national safety codes.

Individual protective equipment must be used

to prevent the shock and arc blast injury where

hazardous live conductors are exposed.

• Do not hold the Current Probe anywhere

beyond the tactile indicator.

• Before each use, inspect the Current Probe.

Look for cracks or missing portions of the

Current Probe housing or output cable

insulation. Also look for loose or weakened

components. Pay particular attention to the

insulation surrounding the jaws.

• Use caution when working with voltages above

60 V dc, 30 V ac rms or 42 V ac peak. Such

voltages pose a shock hazard.

• Use of this equipment is designed to protect

against transients in equipment in fixed

equipment installations, such as distribution

panels., feeders and short branch circuits, and

lighting systems in large buildings.

Produkt Specifikationer

Mærke:	Fluke
Kategori:	Måleudstyr
Model:	i30s

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluke i30s stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måleudstyr Fluke Manualer

Fluke 323 True RMS Manual

14 September 2024

Fluke FEV350 Manual

3 September 2024

Fluke 319 Manual

22 August 2024

Fluke T150/VDE Manual

22 August 2024

30 Juli 2024

30 Juli 2024

30 Juli 2024

29 Juli 2024

29 Juli 2024

28 Juli 2024

Måleudstyr Manualer

Nyeste Måleudstyr Manualer

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025