Fluke i400s Manual

Fluke Måling i400s

Læs gratis den danske manual til Fluke i400s (8 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Fluke i400s, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
®
PN 2414327 February 2005
© 2005 Fluke Corporation. All rights reserved. Printed in U.S.A.
1
i400s
AC Current Clamp
Calibration Information
Introduction
XWWarning
To avoid electric shock or injury, do not perform the performance tests or
calibration procedures unless you are qualified to do so.
The information provided in this manual is for the use of qualified personnel
only.
The i400s Calibration Information provides the information necessary to verify the performance and
adjust the calibration of the Fluke i400s AC Current Clamp, hereafter known as the Current Clamp.
The following information is included in this document:
• Safety Information and Electrical Symbols
• Specifications
• Maintenance
• Performance Tests
• Calibration Adjustment
• User-Replaceable Parts
• Warranty Statement
See the i400s Instruction Sheet for complete operating instructions.
Contact Information
To contact Fluke, call:
USA: 1-888-44-FLUKE (1-888-443-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
USA Service: 1-888-99-FLUKE (1-888-993-5853)
For additional information about Fluke, its products, and services, visit Fluke’s web site at:
www.fluke.com
To register this product, go to register.fluke.com
i400s
Calibration Information
2
Safety Information
XW Read First: Safety Information
To ensure safe operation and service of the Current Clamp, follow these
instructions:
• Read the operating instructions before use and follow all safety
instructions.
• Use the Current Clamp only as specified in the operating instructions,
otherwise the clamp’s safety features may not protect you.
• Adhere to local and national safety codes. Individual protective equipment
must be used to prevent shock and arc blast injury where hazardous live
conductors are exposed.
• Do not hold the Current Clamp anywhere beyond the tactile barrier, see
Figure 1.
• Before each use, inspect the Current Clamp. Look for cracks or missing
portions of the clamp housing or output cable insulation. Also look for
loose or weakened components. Pay particular attention to the insulation
surrounding the jaws.
• Never use the Current Clamp on a circuit with voltages higher than 1000 V
CAT III or 600 V CAT IV.
• CAT III equipment is designed to protect against transients in
equipment in fixed-equipment installations, such as distribution
panels, feeders and short branch circuits, and lighting systems in
large buildings.
• CAT IV equipment is designed to protect against transients from the
primary supply level, such as an electricity meter or an overhead or
underground utility service.
• Use extreme caution when working around bare conductors or bus bars.
Contact with the conductor could result in electric shock.
• Use caution when working with voltages above 60 V dc or 30 V ac. Such
voltages pose a shock hazard.
Electrical Symbols
The symbols in Table 1 appear in this document and on the Current Clamp.
Table 1. Electrical Symbols
Symbol Explanation
, Application around and removal from hazardous live conductors is permitted.
T Product is protected by double insulation.
W Risk of Danger. Important information. See Instruction Sheet.
X Hazardous voltage.
) Conforms to relevant Canadian Standards Association directives.
P Conforms to relevant European Union directives.

Produkt Specifikationer

Mærke: Fluke
Kategori: Måling
Model: i400s

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluke i400s stil et spørgsmål nedenfor, og andre brugere vil svare dig


Måling Fluke Manualer

Fluke

Fluke E-DWT-H Manual

2 August 2025
Fluke

Fluke P5514B-70M Manual

1 August 2025
Fluke

Fluke a3003 FC Manual

16 Maj 2024
Fluke

Fluke 303 Manual

20 Februar 2024
Fluke

Fluke 1507 Manual

4 Februar 2024
Fluke

Fluke i30 Manual

30 Oktober 2023
Fluke

Fluke 345 Manual

22 Oktober 2023
Fluke

Fluke 377 Manual

6 September 2023
Fluke

Fluke T110VDE Manual

22 August 2023
Fluke

Fluke 301D Manual

5 Juni 2023

Måling Manualer

Nyeste Måling Manualer

Crowcon

Crowcon Xgard XGB Manual

12 August 2025
Mitsubishi

Mitsubishi SRK10YYPH-W Manual

12 August 2025
Mitsubishi

Mitsubishi SRK18YYPH-W Manual

12 August 2025
Mitsubishi

Mitsubishi SRK24YYMH-W Manual

12 August 2025
PeakTech

PeakTech 8202 Manual

12 August 2025
Mitsubishi

Mitsubishi SRK13YYPH-W Manual

12 August 2025
Mitsubishi

Mitsubishi SRK50ZTLH-WF Manual

12 August 2025
Mitsubishi

Mitsubishi SRK35ZTLH-WF Manual

12 August 2025
Mitsubishi

Mitsubishi SRK25ZTLH-WF Manual

12 August 2025
Mitsubishi

Mitsubishi SRK71ZTLH-WF Manual

12 August 2025