Fluval Plant Spectrum LED Manual

Fluval Ikke kategoriseret Plant Spectrum LED

Læs gratis den danske manual til Fluval Plant Spectrum LED (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Fluval Plant Spectrum LED, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

INSTRUCTION MANUAL

MODE D'EMPLOI

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

INSTRUCTIEHANDLEIDING

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

INSTRUKCJA OBSŁUGI

PLANT SPECTRUM LED

DEL DE HAUTE LUMINOSITÉ POUR EAU DOUCE

LEISTUNGSSTARKES SÜSSWASSER-LED-BELEUCHTUNGSSYSTEMTEM

LED DE ALTO RENDIMIENTO PARA AGUA DULCE

ZOETWATER-LED

СВЕТОДИОДНЫЕ СВЕТИЛЬНИКИ MARINE SPECTRUM

PLANT SPECTRUM LED

IMPORTANT SAFETY INSTRUCTIONS

WARNING – To guard against injury, basic safety precautions should be observed, including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

and all the important notices on the appliance before using. Failure to do so may result in loss of ﬁsh life and/

or damage to this appliance.

2. DANGER – To avoid possible electric shock, special care should be taken since water is employed in the

use of aquarium equipment. For each of the following situations, do not attempt repairs yourself; return the

appliance to an authorized service facility for service or discard the appliance.

A. If the appliance shows any sign of abnormal water leakage, immediately unplug it from the power source.

B. Carefully examine the appliance after installation. It should not be plugged in if there is water on parts not

intended to be wet. If the appliance or any part of it falls into the water DO NOT reach for it. First unplug

the unit before retrieving.

C. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or it is dropped or

damaged in any manner. The power cord of this appliance cannot be replaced; if the cord is damaged, the

appliance should be discarded. Never cut the cord.

D. To avoid the possibility of the appliance

plug or receptacle getting wet, position

the appliance to one side of a wall mounted

receptacle to prevent water from dripping

onto the receptacle or plug. A “drip loop”

(see illustration) should be arranged by the

user for the cord connecting appliance to

a receptacle. “The drip loop” is that part of

the cord below the level of the receptacle or

the connector if an extension cord is used,

to prevent water travelling along the cord

and coming in contact with the receptacle. If

the plug or receptacle does get wet, DO NOT

unplug the cord. Disconnect the fuse or circuit

breaker that supplies power to the appliance.

Then unplug and examine for presence of

water in receptacle.

3. This appliance is not intended for use by persons (including children) with signiﬁcantly impaired physical

or mental capabilities, unless they have been given supervision or instruction concerning the use of the

appliance by a person responsible for their safety. Children should always be supervised to ensure that they

do not play with the appliance.

4. To avoid injury, do not touch moving parts or hot parts.

5. CAUTION - Always unplug or disconnect all appliances in the aquarium from electricity supply before placing

hands in water, before putting on or taking off parts and while the equipment is being installed, maintained

or handled. Never yank cord to pull plug from outlet. Grasp the plug and pull to disconnect. Always unplug an

appliance from an outlet when not in use.

6. Do not install or store the appliance where it will be exposed to weather or temperatures below freezing. FOR

INDOOR HOUSEHOLD USE ONLY. DO NOT IMMERSE.

7. Make sure the appliance is mounted correctly and securely positioned on the aquarium before operating the

appliance.

8. If an extension cord is necessary, a cord with proper rating should be used. A cord rated for less amperes or

watts than the appliance rating may overheat. Care should be taken to arrange the cord so that it will not be

tripped over or pulled. The connection should be carried out by a qualiﬁed electrical installer.

9. Use only with AC adapter supplied with this product.

10. The socket-outlet shall be installed near the equipment and shall be easily accessible.

11. LED power supply shall not be positioned on or into the cover frame.

12. “Z” attachments: The external ﬂexible cable or cord of this luminaire cannot be replaced; if cord is damaged

the luminaire shall be destroyed.

13. This luminaire can be mounted on any aquarium with glass thickness of between 3 mm and 15 mm.

14. ATTENTION: The light source of this luminaire is not replaceable; when the light source reaches its end of life

the whole luminaire shall be replaced.

15. ATTENTION: Do not stare at the operating light source.

SAVE THESE INSTRUCTIONS

For the complete use and understanding of this product it is recommended that this manual is thoroughly

read and understood. Failure to do so may result in damage to this product.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority

to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure

condition without restriction.

For full instruction manual and video on set up of Bluetooth ® application, visit:

ﬂuvalaquatics.com/plantbluetooth

Download the Free SmartAPP now:

Produkt Specifikationer

Mærke:	Fluval
Kategori:	Ikke kategoriseret
Model:	Plant Spectrum LED

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluval Plant Spectrum LED stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Fluval Manualer

Fluval Reef 4.0 Manual

13 August 2025

Fluval Plant 4.0 LED Manual

12 August 2025

Fluval Aquasky 3.0 LED Manual

19 Juni 2025

18 Juni 2025

26 December 2024

7 November 2024

30 August 2024

30 August 2024

13 Juli 2024

Fluval Bio-CO2 Pro Manual

13 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Cres Cor H137WSUA5D Manual

20 August 2025

Moulinex Pulseo LM17GD Manual

20 August 2025

Tefal EasyGrill BG1303 Manual

20 August 2025

Tenda U2 Manual

20 August 2025

Tefal Ultraglide Plus FV5841 Manual

20 August 2025

Tefal I-Coach Touch QB950D Manual

20 August 2025

BEKO BDIN38551P Manual

20 August 2025

BEKO FSE52135DCRSN Manual

20 August 2025

Karma PRJ 5000 Manual

20 August 2025

Aqua-Vu Micro Stealth 4.3 Manual

20 August 2025