Focal Cub 2 Manual

Focal Subwoofer Cub 2

Læs gratis den danske manual til Focal Cub 2 (29 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 65 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 33 anmeldelser. Har du et spørgsmål om Focal Cub 2, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/29
Sib® and Cub2® are trademarks of Focal-JMlab
®
Focal-JMlab - BP374 - 108, rue de l'Avenir - 42353 La Talaudière cedex - France - www.focal-fr.com
Tél. 00 33 4 77 43 57 00 - Fax 00 33 4 77 43 57 04
User manual
Installation guide page: 11
Guide d’installation page : 17
CONFORMITY
An example of this equipment has been tested and found to comply with the following European directives and international standards:
Electromagnetic compatibility Electrical safety EN 55103 / EN 60065
DÉCLARATION DE CONFORMITÉ
Un échantillon de ce produit a été testé comme étant en conformité avec les directives européennes et autres standards internationaux suivants :
Compatibilité électromagnétique Sécurité électrique EN 55103 / EN 60065
Read first !
Important safety informations !
The light flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated dangerous «
voltage within the product» ’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
Caution : To prenvent yhe risk of electric
shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to
qualified service personnel.
The exclamation point within an equilateral
triangle is intented to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
1. Please read the instructions.
2. You must keep these instructions.
3. You must also read the warnings.
4. Always follow all the instructions.
5. Do not use this appliance near water.
6. When cleaning, use a dry cloth only.
7. Do not block any ventilation openings. Always
follow the manufacturer’s instructions on how
install the appliance.
8. Do not place the appliance near a heat source
such as a heater, a cooker, a heating element or
any other appliances (including amplifiers) that
release heat.
9. Always carefully follow the safety instructions
for the mains supply cord. The cord is made of
two strips; one is wider than the other one. An
earth cord is made of two strips, plus one for the
earth connection. The wider strip or the third one
is there for safety purposes. If the mains supply
cord does not fit your mains supply plug, you
must seek advice from an electrician and have the
obsolete plug replaced.
10. Make sure that the supply cable cannot be
tread on, squashed or pinched. Please act carefully
with the supply pin and the connection between
the cord and the appliance.
11. Only use the accessories recommended by the
manufacturer.
12. Only use the lifting accessories, stands,
tripods, trolleys or tables recommended by the
manufacturer or use only those sold with the
appliance. When using a trolley, you must be
very careful when moving the appliance with this
device in order to avoid any injuries that could be
caused if it were to tip over.
13. You must unplug the appliance when there is
a storm or if it is not being used for long periods
of time.
14. Any service work must be done by qualified
persons. Servicing is imperative after any damage
such as damage of the cable or the supply pin,
spilling of liquid, inserting objects inside the
appliance, exposure to rain or damp, bad operation
or if the appliance should fall.
15. Do not take any risks; do not use accessories
that are not recommended by the manufacturer.
16. This appliance must be connected to the
correct mains supply only, as indicated on the label
of the appliance. If you have any doubt on the
type of the mains supply of your electricity, you
must seek advice from the supplier of the product
or the supplier of electricity. For appliances
supplied by a battery or any other supply, please
follow the manual’s instructions.
17. If an external aerial or a cable network is
connected to your appliance, you must make sure
that the aerial or cable are connected to the earth
to guarantee protection against electrical surge and
also the effects of static electricity. The information
regarding the way of correctly connecting the
pole to the earth, as well as the cable of the aerial,
the section of the conducers, the position of the
system of discharged, the connection, and the
specifications of the electrode of the earth are
contained in the Article 810 of the National
Electrique, ANSI/NFPA 70.
18. An external aerial must always be kept away
from high voltage wires or electric circuits. It must
also be kept away from high-density lighting and
places where it could fall on high voltage wires or
an electric circuit. When installing an external
aerial, please remember to avoid any contact
with such circuits, as there may be a risk of lethal
danger.
19. Do not overload wall plugs, electric extensions
or multi plugs. Failing to do so may result in risks
of fires and electric shocks.
20. You must not insert any kind of object in
the ventilation openings of the appliance. Any
kind of object could then be in contact with high
voltage components or lead to a short-circuit and
ultimately lead to a risk of fire or an electric shock.
Do not spill any liquid on the appliance.
21. Do not attempt to repair the appliance
yourself. When opening this appliance you may
be exposed to hazardous tensions and other risks.
For all interventions you must see a qualified
person.
22. When it is necessary to replace components,
please make sure that the technician uses the
components recommended by the
manufacturer or make sure that the components
used have the same characteristics as the genuine
ones. Using components that are not genuine may
result in risks of fire, electric shocks or other risks.
23. After any service or repair, you must ask the
technician to test the appliance to make sure it is
safe to use.
24. The appliance must not be wall- mounted
nor mounted on a ceiling unless it is specified by
the manufacturer and according to the wires of
the aerial.
25. The On/Off switch can disconnect the
product from the main supply. It is situated on the
aluminum back plate of the product and it must
be always easily accessible by the user.
26. Do not expose to dripping or splashing.
2
GB

Produkt Specifikationer

Mærke: Focal
Kategori: Subwoofer
Model: Cub 2

Har du brug for hjælp?

Hvis du har brug for hjælp til Focal Cub 2 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Subwoofer Focal Manualer

Focal

Focal Sub 600 P Manual

20 Februar 2025
Focal

Focal SUB 25 KXE Manual

28 August 2024
Focal

Focal SUB 30 KXE Manual

28 August 2024
Focal

Focal SUB 5 KM Manual

24 August 2024
Focal

Focal BP20 Manual

21 August 2024
Focal

Focal Cub 2 Manual

21 August 2024
Focal

Focal CMS SUB Manual

20 August 2024
Focal

Focal Flax Evo P 25 FE Manual

20 August 2024
Focal

Focal Profile SW 908 Manual

20 August 2024
Focal

Focal IFR A130-6.1 Manual

19 August 2024

Subwoofer Manualer

Nyeste Subwoofer Manualer

DS18

DS18 IXS12.4S Manual

16 Juni 2025
RCF

RCF SUB 9019-AS Manual

16 Juni 2025
Induction Dynamics

Induction Dynamics SW4 Manual

15 Juni 2025
Pure Acoustics

Pure Acoustics Sub AS10 Manual

15 Juni 2025
RCF

RCF SUB 9029-AS Manual

15 Juni 2025
RCF

RCF SUB 9016-AS Manual

15 Juni 2025
Planet Audio

Planet Audio P8AW Manual

15 Juni 2025
Planet Audio

Planet Audio P10AW Manual

15 Juni 2025
Induction Dynamics

Induction Dynamics SW2 Manual

10 Juni 2025
Induction Dynamics

Induction Dynamics SW5.W Manual

9 Juni 2025