Fredenstein Bento 10 DS Manual

Fredenstein Effektmaskine Bento 10 DS

Læs gratis den danske manual til Fredenstein Bento 10 DS (9 sider) i kategorien Effektmaskine. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Fredenstein Bento 10 DS, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/9
Bento 10 DS
Module Carrier
Operating Manual
Fredenstein Bento 10 DS Module Carrier
The Fredenstein Bento 10 DS is the most advanced module carrier for ten Fredenstein Series 600
modules or API-500 compatible plug-in cards in 3U 19 inch rack-mount format. The Bento 10 DS
features several important upgrades compared with third party products:
the color LCD Display and a rotary encoder:
to set routing and other parameters with non-volatile storage. In addition, if certain Fredenstein
modules are used, like the F600A, F601A, F602, F603A/B, and the F607, all operating parameters
of theses modules are displayed as well.
Universal power supply:
accepting mains voltages from 90V AC to 240V AC, 50 to 60 Hz.
Increased output currents: 6A or 600 mA per slot and +48V DC 0.25A
Monitoring of output voltages and currents.
Auxiliary Audio Inputs and Outputs
Built-in Audio Routing:
Modules can be daisy-chained by simply using the menu driven user interface on the LCD.
Built-in compatibility switches for non-conforming modules.
Compressor buss linking:
Compressor modules can be linked simply using the menu driven user interface on the LCD as well.
Multi-layer back-plane:
Increased signal integrity and lower noise floor.
Ground-lift :
In case of ground loops, the audio ground and the protective ground can be disconnected. Please use
only if absolutely necessary.
Installation:
Electrical Safety Warnings:
Do not open the enclosure, hazardous voltages are present inside!
There are no user serviceable parts inside.
Always disconnect the mains cord before installing or removing modules!
If you need to replace the mains fuse, make sure the replacement has the same
rating ( 3.15 AT).
Please disconnect the mains from your Bento 10 DS before installing or removing modules. Make
sure each installed module is well seated in the receiving connector and the module is secured by
fasten the two mounting screws (size: M3).
Front View:
Fredenstein Bento 10 DS Manual V1.0 Sep 25, 2017 Page 1

Produkt Specifikationer

Mærke: Fredenstein
Kategori: Effektmaskine
Model: Bento 10 DS

Har du brug for hjælp?

Hvis du har brug for hjælp til Fredenstein Bento 10 DS stil et spørgsmål nedenfor, og andre brugere vil svare dig


Effektmaskine Fredenstein Manualer

Fredenstein

Fredenstein Bento 10 DS Manual

19 December 2023

Effektmaskine Manualer

Nyeste Effektmaskine Manualer

Magic FX

Magic FX Blower Manual

1 August 2025
Magic FX

Magic FX Eco2Jet Manual

30 Juli 2025
Magic FX

Magic FX Smokebubble Blaster Manual

30 Juli 2025
DJ Power

DJ Power DSK-1500V Manual

30 Juli 2025
Stairville

Stairville RED Fog 3000 Manual

30 Juli 2025
Eurolite

Eurolite SD-201 DMX Manual

30 Juli 2025
DJ Power

DJ Power P-1000Y Manual

30 Juli 2025
WES Audio

WES Audio Dione Manual

29 Juli 2025
NUX

NUX XTC OD Manual

29 Juli 2025
NUX

NUX Amp Academy NGS-6 Manual

29 Juli 2025