Fuji Micro Genforce F6200RI Manual

Fuji Ikke kategoriseret Micro Genforce F6200RI

Læs gratis den danske manual til Fuji Micro Genforce F6200RI (29 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Fuji Micro Genforce F6200RI, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/29

Petrol Powered Inverter Generators

User Manual

[Revision 2.0 March 2017]

RETAIN THIS MANUAL FOR FUTURE REFERENCE

PLEASE READ THIS MANUAL CAREFULLY BEFORE USE

The product is NOT supplied with engine oil, although traces of oil from the manufacturing

process may be present. It is essential to add adequate engine oil of the correct type to the

engine before use see –Checking and Changing Engine Oil. Failure to add engine oil will void the

product warranty.

Petrol Powered Inverter Generators

E&OE © MIT 2 2017

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or

equipment damage may occur.

It is important that you read and

understand the instruction manual before

use and keep the manual in a safe place

for future reference. Safety information

presented here is generic in nature some –

advice may not be applicable to every

piece of equipment.

All safety precautions must be observed to

reduce the risk of personal injury when

operating the equipment.

The term “equipment" refers to your

product, be it electrical mains, battery or

petrol engine powered.

IMPORTANT Handle the equipment –

safely and carefully.

BEFORE USE - If you are not familiar with

the safe operation/handling of this

equipment, or are in any way unsure of any

aspect of suitability or correct use for it

your application, you should complete

training conducted by a person or

organization qualified in safe use and

operation of this equipment, including

fuel/electrical handling and safety.

WARNINGS

 Read all safety warnings and all

instructions. Failure to follow warnings

and instructions may result in electric

shock, fire and/or serious injury.

 Never run a petrol engine in confined

areas.

 Do not operate the equipment in

flammable or explosive environments,

such as in the presence of flammable

liquids, gases or dust. Engine and

equipment may create sparks or heat

that may ignite vapours, dust etc

 Keep clear of moving parts.

 This equipment may be a potential

source of electric shock if misused.

 Do not operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

 Do not allow others to use the

equipment unless they have read this

manual and are adequately trained .

 When using the equipment, basic

safety precautions detailed here must

always be followed to reduce the risk

of fire, electric shock, personal injury

and material damage.

 When wiring electrically powered

equipment, follow all electrical and

safety codes.

 sure all power sources conform to En

equipment voltage requirements and

are disconnected before connecting

equipment.

General Work Area Safety

Work areas should be clean and well it.

Do not e the equipment operat if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

Personal Safety

Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

Prevent unintentional starting of the

equipment - ensure equipment and power

source switches are in the OFF position

before connecting or moving the

equipment. Do not carry equipment with

hands/fingers touching any controls.

Remove any tools or other items that are

not a part of the equipment from it before

starting or switching on.

Stay alert and use common sense when

operating equipment. Do not overreach.

Keep proper footing and balance at all

times. Do not use equipment when tired or

under the influence of drugs, alcohol or

medication. This equipment is not intended

for use by persons with reduced physical,

sensory or mental capabilities.

You must wear appropriate protective

equipment when operating, servicing, or

when in the operating area of the

equipment to help protect from serious

injury, including eye injury, inhalation of

toxic fumes, burns, and hearing loss.

Always wear eye protection. Protective

equipment such as respirators, non-skid

safety shoes, hard hat, hearing protection

etc should be used for appropriate

conditions. Other people nearby should

also wear appropriate personal protective

equipment. Do not wear loose clothing or

jewellery, which can be caught in moving

parts. Keep hair and clothing away from

the equipment.

If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce

dust-related hazards.

General Equipment Use and Care

Do not force the equipment. Use the

correct equipment for your application. The

correct equipment will perform better and

be safer within its design parameters. Do

not use the equipment if the ON/OFF

switch malfunctions any equipment that –

cannot be controlled with the ON/OFF

switch is dangerous and must be repaired.

Use the equipment and accessories etc. in

accordance with these instructions, taking

into account working conditions and the work

to be performed. Using the equipment for

operations different from those intended

could result in hazardous situations.

Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage or any other

condition that may affect its operation. If

damaged, have the equipment repaired by an

authorized service center or technician before

use.

Always keep the equipment and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment, controls

and handles dry and free from dirt, oil and

grease.

Store the equipment out of reach of children

or untrained persons. To avoid burns or fire

hazards, let the equipment cool completely

before transporting or storing. Never place

the equipment in places where there are

flammable materials, combustible gases or

combustible liquids etc.

The equipment is not weatherproof, and

should not be stored in direct sunlight, at high

ambient temperatures or locations that are

damp or very humid.

Generator Use and Care

WARNINGS

 If the generator is for back-up power to a

house etc, it must be connected to the

building electrical system by a qualified

electrician and must comply with

relevant laws and electrical codes. If not

connected correctly, use of the

generator may present electrocution,

electric shock, explosion and fire

hazards.

 The generator creates high voltage and

current electricity. Do not connect

incompatible devices.

 Never insert any object other than

compatible connectors into any

generator output connector.

 Do not operate the equipment with wet

hands or clothing.

 When using the generator, ensure to

keep it and all connected cables away

from other electrical cables.

 Operate the generator on solid, level

surfaces only, with at least 1m (3’)

between it and other equipment or

objects.

Produkt Specifikationer

Mærke:	Fuji
Kategori:	Ikke kategoriseret
Model:	Micro Genforce F6200RI

Har du brug for hjælp?

Hvis du har brug for hjælp til Fuji Micro Genforce F6200RI stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Fuji Manualer

Fuji GW690II Manual

22 August 2024

Fuji ST-705 Manual

22 August 2024

Fuji V2 Manual

22 August 2024

Fuji Professional GW690III Manual

22 August 2024

22 August 2024

22 August 2024

22 August 2024

22 August 2024

Fuji AX Multi Program Manual

22 August 2024

Fuji HD-S Manual

22 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Oppo Find X7 Manual

31 Juli 2025

Intellinet 713191 Manual

31 Juli 2025

Emos DCFW01 Manual

31 Juli 2025

AIC RSC-3ET Manual

31 Juli 2025

Tone City King Of Blues Overdrive Manual

31 Juli 2025

Tripp Lite Protect It! TLM606HJ Manual

31 Juli 2025

Bestway Hydro-Force 6531M Manual

31 Juli 2025

Tripp Lite NGI-S04C2 Manual

31 Juli 2025

Advantech RSB-3720 Manual

31 Juli 2025

Tripp Lite Protect It! TLM606 Manual

31 Juli 2025