Furuno 1832 Manual
Furuno
Skibsradar
1832
Læs nedenfor 📖 manual på dansk for Furuno 1832 (63 sider) i kategorien Skibsradar. Denne guide var nyttig for 33 personer og blev bedømt med 4.9 stjerner i gennemsnit af 17 brugere
Side 1/63
C
9 - 5 2 , A s h i h a r a - c h o ,
N i s h i n o m i y a , J a p a n
T e l e p h o n e : 0 7 9 8 - 6 5 - 2 1 1 1
T e l e f a x : 0 7 9 8 - 6 5 - 4 2 0 0
Y o u r L o c a l A g e n t / D e a l e r
A l l r i
g
h t s r e s e r v e d .
P U B . N o . O M E - 3 4 4 1 0
M O D E L 1 8 3 2 / 1 9 3 2 / 1 9 4 2
(
H I M A
)
F I R S T E D I T I O N : J A N . 1 9 9 7
P : O C T . 1 7 , 2 0 0 1
Printed in Japan
iiiiiiiiiiiii i
"DANGER", "WARNING CAUTION" and " " notices appear throughout this manual. It is the
responsibility of the operator and the installer of the equipment to read, understand and
follow these notices. If you have any questions regarding these safety instructions, please
contact a FURUNO agent or dealer.
SAFETY INSTRUCTIONS
WARNING
WARNING
WARNING
WARNINGWARNING
Do not disassemble or modify the
equipment.
Fire electrical shock or serious injury can
result.
Turn off the power immediately if water
leaks into the equipment or the
equipment is emitting smoke or fire.
Continued use of the equipment can cause
fire or electrical shock.
Do not place liquid-filled containers on
the top of the equipment.
Fire or electrical shock can result if a liquid
spills into the equipment.
Use the proper fuse.
Use of a wrong fuse can result in fire or
permanent equipment damage.
Do not use the equipment for other than
its intended purpose.
Personal injury can result if the equipment
is used as a chair or stepping stool, for
example.
Do not place objects on the top of the
equipment.
The equipment can overheat or personal
injury can result if the object falls.
CAUTION
CAUTION
CAUTION
CAUTIONCAUTION
Do not open the equipment.
Hazardous voltage which can
cause electrical shock, burn or
serious injury exists inside the
equipment. Only qualified
personnel should work inside
the equipment.
Wear a safety belt and hard
hat when working on the
antenna unit.
Serious injury or death can
result if someone falls from
the radar antenna mast.
Stay away from transmitting
antenna.
The radar antenna emits mi-
crowave radiation which can
be harmful to the human body,
particularly the eyes. Never
look directly into the antenna
radiator from a distance of
less than 1 m when the radar
is in operation.
Turn off the radar power
switch before servicing the
antenna unit. Post a warn-
ing sign near the switch
indicating it should not be
turned on while the antenna
unit is being serviced.
Prevent the potential risk of
someone begin struck by the
rotating antenna and expo-
sure to RF radiation hazard.
WARNING
WARNING
WARNING
WARNINGWARNING
iii
Congratulations on your choice of the
FURUNO MODEL 1832/1932/1942 Marine
Radar. We are confident you will see why the
FURUNO name has become synonymous with
quality and reliability.
For over 50 years FURUNO Electric Company
has enjoyed an enviable reputation for innova-
tive and dependable marine electronics equip-
ment. This dedication to excellence is furthered
by our extensive global network of agents and
dealers.
Your radar is designed and constructed to meet
the rigorous demands of the marine environ-
ment. However, no machine can perform its
intended function unless properly installed and
maintained. Please carefully read and follow
the recommended procedures for installation,
operation and maintenance.
While this unit can be installed by the purchaser,
any purchaser who has doubts about his or her
technical abilities may wish to have the unit
installed by a FURUNO representative or other
qualified technician. The importance of a
through installation can not be overemphasized.
We would appreciate hearing from you, the end-
user, about whether we are achieving our pur-
poses.
Thank you for considering and purchasing
FURUNO equipment.
Features
Your radar has a large variety of functions, all
contained in a remarkably small cabinet.
The main features of the MODEL 1832/1932/
1942 are:
¡Traditional FURUNO reliability and qual-
ity in a compact, lightweight and low-cost
radar.
¡Durable brushless antenna motor.
¡On-screen alphanumeric readout of all op-
erational information.
¡Standard features include EBL (Electronic
Bearing Line), VRM (Variable Range
Marker), Guard Alarm, Display Off Center,
and Echo Trail.
¡Watchman feature periodically transmits the
radar to check for radar targets which may
be entering the alarm zone.
¡Ship’s position in latitude and longitude and
Loran C Time Differences, range and bear-
ing to a waypoint, and ship’s speed/ head-
ing/course can be shown in the bottom text
area. (Requires a navigation aid which can
output such data in IEC 1162 format.)
¡Zoom feature provided.
FOREWORD
v
monochrome CRT
3. Range scale (nm):
Range, Range interval and no. of Rings:
0.125 (0.0625, 2), 0.25 (0.125, 4), 0.75
(0.25, 3), 1 (0.25, 4), 1.5 (0.5, 3), 2 (0.5, 4),
3 (1, 3), 4 (1, 4), 6 (2, 3), 8 (2, 4), 12 (3, 4),
16 (4, 4), 24 (6, 4), 36 (12, 3)
4. Bearing resolution: 4°
5. Bearing accuracy: Within 1°
6. Range discrimination: Better than 20 m
7. Range ring accuracy:
0.9 % or range in use or 8 m, whichever is
larger
8. Minimum range: Better than 25 m
9. Markers:
Heading line, Bearing scale, Range ring,
VRM 1/2, EBL 1/2, Tuning indicator,
Cursor, Alarm zone, North mark (heading
sensor input required)
10. Alphanumeric indication:
Range, Range ring interval, Pulselength (SP,
MP, LP), Display mode (HU, CU, NU, TM),
Interference rejection (IR1, IR2, IR3), VRM
(1,2), EBL (1, 2), Automatic A/C SEA (A/C
AUTO), Stand-by (ST-BY), Radar alarm:
G(IN)/G(OUT)/G(ACKN), Echo stretch
(ES1, ES2), Range to cursor, Bearing to
cursor, Echo trailing (TRAIL), Trail time,
Trail elapsed time, Navigation data (naviga-
tion input required), heading (HDG, heading
sensor input required)
11. Vibration:
Vibration Total amplitude
5 to 12.5 Hz ± 1.6 mm
12 to 25 Hz ± 0.35 mm
25 to 50 Hz ± 0.10 mm
12. Temperature:
Antenna unit; -25 °C to + 70 °C
Display unit; -15 °C to + 55 °C
13. Humidity:
Relative humidity 93% or less at + 40°C
14. Waterproofing: Antenna unit;
IPX6
Display unit;
IPX5
15. Power supply & power consumption:
12 V, 24 V or 32 VDC (10.2 V to 41.6 VDC)
50W
16. Protection feature:
Protection against reverse polarity, overvolt-
age, overcurrent, and internal fault
17. Compass safe distance:
MODEL 1832
SPECIFICATIONS
ANTENNA UNIT
1. Radiator: Printed array
2. Radiator length: 60 cm
3. Horizontal beamwidth: 3.9°
4. Vertical beamwidth: 20°
5. Sidelobe:
Within ± 20° of mainlobe; less than -18 dB
Outside ± 20° of mainlobe; less than -23 dB
6. Polarization: Horizontal
7. Antenna rotation speed: 24 rpm
8. Wind resistance:
Relative wind speed 100 knots (51.5 m/s)
TRANSCEIVER MODULE
(contained in radome)
1. Transmitting tube: MG5248, E3571 or
MAF1421B
2. Frequency:
9410 MHz 30 MHz±
3. Peak output power: 4 kW nominal
4. Pulselength & pulse repetition rate:
0.08 µs, 2100 Hz (0.125, 0.25, 0.5, 0.75, 1.5)
0.3 µs, 1200 Hz (1.5, 2, 3)
0.8 µs, 600Hz (3, 4, 6, 8, 12, 16, 24, 36)
5. Warmup time: 1:30
6. Modulator: FET switching
method
7. I.F.: 60 MHz
8. Tuning: 3Automatic or
manual
9. Receiver front end: MIC (Microwave
IC)
10. Bandwidth:
Tx pulselength 0.3 s and 0.08 s: 25 MHzµ µ
Tx pulselength 0.8 s: 3 MHzµ
11. Duplexer: Circulator with diode
limiter
DISPLAY UNIT
1. Indication system: PPI raster scan
2. Display: 10-inch rectangular
vi
MODEL 1932
SPECIFICATIONS
ANTENNA UNIT
1. Radiator: Slotted waveguide
array
2. Radiator length: 100 cm
3. Horizontal beamwidth: 3.9°
4. Vertical beamwidth: 27°
5. Sidelobe:
Within 20± ° of mainlobe; less than -24 dB
Outside ± 20° of mainlobe; less than -30 dB
6. Polarization: Horizontal
7. Antenna rotation speed: 24 rpm
8. Wind resistance:
Relative wind speed 100 knots (51.5 m/s)
TRANSCEIVER MODULE
(contained in antenna)
1. Pulselength & pulse repetition rate:
0.08 µs, 2100 Hz (0.125, 0.25, 0.5, 0.75, 1.5)
0.3 µs, 1200 Hz (1.5, 2, 3)
0.8 µs, 600Hz (3, 4, 6, 8, 12, 16, 24, 36, 48)
2. Others: See MODEL 1832.
DISPLAY UNIT
1. Range scale (nm):
Range, Range interval and no. of Rings:
0.125 (0.0625, 2), 0.25 (0.125, 4), 0.75
(0.25, 3), 1 (0.25, 4), 1.5 (0.5, 3), 2 (0.5, 4),
3 (1, 3), 4 (1, 4), 6 (2, 3), 8 (2, 4), 12 (3, 4),
16 (4, 4), 24 (6, 4), 36 (12, 3), 48 (12, 4)
2. Compass safe distance:
Standard compass Steering compass
Display unit 0.75 m 0.6 m
Antenna unit 1.1 m 0.8 m
3. Others: See MODEL 1832.
MODEL 1942
SPECIFICATIONS
ANTENNA UNIT
1. Radiator: Slotted waveguide
array
2. Radiator length: 120 cm
3. Horizontal beamwidth: 1.9°
4. Vertical beamwidth: 22°
5. Sidelobe:
Within 20 of mainlobe; less than -24 dB± °
Outside ± 20° of mainlobe; less than -30 dB
6. Polarization: Horizontal
7. Antenna rotation speed: 24 rpm
8. Wind resistance:
Relative wind speed 100 knots (51.5 m/s)
TRANSCEIVER MODULE
(contained in antenna)
1. Transmitting tube: MG5389 or E3560
2. Peak output power: 6 kW nominal
3. Pulselength & pulse repetition rate:
0.08 µs, 2100 Hz (0.125, 0.25, 0.5, 0.75, 1.5)
0.3 µs, 1200 Hz (1.5, 2, 3)
0.8 µs, 600Hz (3, 4, 6, 8, 12, 16, 24, 36, 48, 64)
4. Bandwidth:
Tx pulselength 0.3 s and 0.08 s: 25 MHzµ µ
Tx pulselength 0.8 s: 5 MHzµ
5. Others: See MODEL 1832.
DISPLAY UNIT
1. Range scale (nm):
Range, Range interval and no. of Rings:
0.125 (0.0625, 2), 0.25 (0.125, 4), 0.75
(0.25, 3), 1 (0.25, 4), 1.5 (0.5, 3), 2 (0.5, 4),
3 (1, 3), 4 (1, 4), 6 (2, 3), 8 (2, 4), 12 (3, 4),
16 (4, 4), 24 (6, 4), 36 (12, 3), 48 (12, 4), 64
(16, 4)
2. Compass safe distance:
Standard compass Steering compass
Display unit 0.75 m 0.6 m
Antenna unit 1.0 m 0.74 m
3. Power supply & power comsumption:
12 V, 24 V or 32 VDC (10.2 V to 41.6 VDC)
52W
Produkt Specifikationer
| Mærke: | Furuno |
| Kategori: | Skibsradar |
| Model: | 1832 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Furuno 1832 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Skibsradar Furuno Manualer
21 August 2024
21 August 2024
15 August 2024
8 August 2024
8 August 2024
8 August 2024
8 August 2024
6 August 2024
6 August 2024
6 August 2024
Skibsradar Manualer
- Skibsradar Lowrance
- Skibsradar Garmin
- Skibsradar Navman
- Skibsradar Raymarine
- Skibsradar Simrad
- Skibsradar JRC
Nyeste Skibsradar Manualer
8 Oktober 2024
8 Oktober 2024
3 Oktober 2024
5 September 2024
5 September 2024
4 September 2024
23 August 2024
19 August 2024
18 August 2024
18 August 2024