Fusion MS-SRX400 Manual
Læs gratis den danske manual til Fusion MS-SRX400 (29 sider) i kategorien Radio. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Fusion MS-SRX400, eller vil du spørge andre brugere om produktet?
Side 1/29
®
F U S IO N E N T E R T A I N M E N T . C O M
FUSION®
Apollo™ SRX400
O W N E R ’ S M A N U A L
ENGLISH
© 2018 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to for www.fusionentertainment.com
current updates and supplemental information concerning the use of this product.
Garmin®, FUSION®, and the Fusion logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Apollo ™, FUSION-Link™, FUSION PartyBus™, and True-
Marine™ are trademarks of Garmin. These trademarks may not be used without the express permission of Garmin.
Apple® and App StoreSM are trademarks of Apple Inc. Android ™ and Google Play™ are a trademarks of Google Inc. Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any
use of such marks by Garmin is under license. Wi Fi‑® is a registered mark of Wi-Fi Alliance Corporation. Other trademarks and trade names are those of their respective owners.
Table of Contents
Getting Started 1
Getting the Owner's Manuals 1
Apollo SRX400 Zone Stereo Controls 1
Apollo SRX400 Zone Stereo Screen 1
Selecting a Source 1
Entering Text 1
Adjusting the Backlight Brightness 1
Audio Control 1
Adjusting the Volume 1
Muting all Connected Stereos 1
Adjusting the Tones 1
Adjusting the Subwoofer Level 1
DSP Settings 2
Configuring the DSP Settings 2
Bluetooth Device Playback 2
Connecting a Compatible Bluetooth Device 2
Selecting a Different Bluetooth Source 2
Bluetooth Source Settings 2
FUSION-Link Remote Control App 2
Radio 2
Setting the Tuner Region 2
Changing the Radio Station 2
Presets 3
Saving a Station as a Preset 3
Selecting a Preset from a List 3
Removing Presets 3
FUSION PartyBus Networking 3
Connecting the FUSION PartyBus Device to a Wireless Access
Point 3
Streaming from a FUSION PartyBus Network Device 3
Stopping Streaming from a FUSION PartyBus Device on the
Network 3
General Settings 3
Speaker Zone Settings 4
Disabling the Internal Amplifiers 4
Power Options 4
Network Settings 4
Advanced Network Configuration 4
Resetting Network Settings 5
Appendix 5
Registering Your Apollo SRX400 5
Cleaning the Device 5
Software Updates 5
True-Marine™ Products 5
Specifications 5
Troubleshooting 5
The stereo does not respond to key presses 5
My Bluetooth audio is interrupted by short breaks 5
The stereo does not display all song information from my
Bluetooth source 5
Network Troubleshooting 5
Index 6
Table of Contents i
Getting Started
WARNING
See the guide in the Important Safety and Product Information
product box for product warnings and other important
information.
Getting the Owner's Manuals
To fully understand the features and operations of your stereo,
you can get the latest stereo owner's manual and translations of
manuals from the web. You can also download the full remote
owner's manual for more information about using this remote.
1Go to .www.fusionentertainment.com/marine
2Select the product.
3Select .Manuals & Downloads
4Select a manual.
Apollo SRX400 Zone Stereo Controls
Button Function
Dial • Turn to adjust the volume, move through the menus, or
adjust a setting.
• Press to select an option or a setting.
• Press and hold to select the other tab in the screen.
• Press to turn on the device.
• Press to mute and un-mute the audio.
• Press and hold to turn off the device.
• Press to open the menu.
• Press to return to the previous screen from the menu.
• Press and hold to exit the menu.
• Press to open the source selection screen and select a
source.
• Press and hold to join and leave the FUSION PartyBus
™
network.
• BT: Press to skip to the beginning of the track or to the
previous track.
• AM/FM:
◦ Auto or Manual tuning: Press to tune to the previous
station.
◦ Manual: Press and hold for faster station skipping.
◦ Preset: Press to change to the previous preset (with two
or more presets saved).
• BT: Press to pause or resume the current track.
• AM/FM: Press to cycle through the tuning modes (auto,
manual, and presets).
• BT: Press to skip to the next track.
• AM/FM:
◦ Auto or Manual tuning: Press to tune to the next station.
◦ Manual: Press and hold for faster station skipping.
◦ Preset: Press to change to the next preset (with two or
more presets saved).
Apollo SRX400 Zone Stereo Screen
The information displayed on the screen varies depending on
the source selected. This example shows the device playing a
track on a device connected using Bluetooth
® wireless
technology.
ÀSource
ÁAlbum art (if available from a compatible source)
ÂTrack details
ÃElapsed time and track duration (if available)
Selecting a Source
1Select .
2Turn the dial to highlight a source.
3Press the dial to select the source.
Entering Text
1In a field that allows you to enter text, select to erase the
existing characters.
2If necessary, select or to use numerals or letters.
3Turn the dial to choose a character, and press the dial to
select it.
4Select to save the new text.
Adjusting the Backlight Brightness
1Select > > .SETTINGS BRIGHTNESS
2Turn the dial.
Audio Control
Adjusting the Volume
Turn the dial.
Muting all Connected Stereos
You can quickly mute the audio from this stereo or from all
stereos connected to the network (FUSION PartyBus
Networking, page 3).
1From any source, select .
The mute symbol appears and audio from this stereo is
silenced.
2Press the dial to select .MUTE SYSTEM
Audio from all connected stereos is silenced.
3Press the dial to select .UNMUTE SYSTEM
Audio is restored to all connected stereos.
Adjusting the Tones
1Select > > > > .SETTINGS ZONE ZONE 1 TONE
2Turn the dial to adjust the level.
3Press the dial to switch to a different tone.
Adjusting the Subwoofer Level
1Turn the dial.
The volume adjustment screen appears.
2Press and hold the dial to select the tab.SUB LEVEL
3Turn the dial to adjust the subwoofer level.
Getting Started 1
DSP Settings
This stereo features digital signal processing (DSP). You can
select pre-configured DSP settings for FUSION® speakers and
amplifiers to optimize audio reproduction in their installed
locations.
All DSP settings are configured using the FUSION-Link™ remote
control app ( ).FUSION-Link Remote Control App, page 2
Configuring the DSP Settings
You must download and install the FUSION-Link remote control
app on your compatible Apple® or Android™ device before you
can configure the DSP settings (FUSION-Link Remote Control
App, page 2).
You can configure the DSP settings to optimize the sound on
each zone with the installed speakers, amplifiers, and
environment.
1From the settings menu on your Apple or Android device,
connect to the stereo using Bluetooth technology, or connect
to the same wireless network as the stereo.
2Open the FUSION-Link remote control app on your
compatible Apple or Android device.
3If necessary, select the stereo you want to configure.
4Select .SETTINGS
5If necessary, select the tab.MUSIC SETTINGS
6Select .Zone
7Select a zone.
8Select .DSP SETTINGS
9Configure the DSP settings as needed, depending on the
models of FUSION speakers and amplifiers connected to the
zone.
10 Repeat these steps for each zone.
11 After you have finished configuring the DSP settings for all
zones, select > > .SETTINGS Zone SEND DSP SETTINGS
Bluetooth Device Playback
You can pair the stereo to up to eight Bluetooth media devices.
You can control the playback using the stereo controls on all
Bluetooth devices, and on some devices you can browse the
music collection from the menu on the stereo. On Bluetooth
devices that do not support media browsing, you should select
the song or playlist on the media device.
The availability of song information such as song title, artist
name, track duration, and album art depends on the capability of
the media player and music application.
Connecting a Compatible Bluetooth Device
You can play media from a compatible Bluetooth device using
the Bluetooth wireless connection.
You can control the music playback with the media app on a
Bluetooth device or using the FUSION-Link remote control app
( ).FUSION-Link Remote Control App, page 2
1Select the source.BT
2Select > to make the stereo visible to DISCOVERABLE
your compatible Bluetooth device.
3Enable Bluetooth on your compatible Bluetooth device.
4Bring the compatible Bluetooth device within 10 m (33 ft.) of
the stereo.
5On your compatible Bluetooth device, search for Bluetooth
devices.
6On your compatible Bluetooth device, select the stereo from
the list of detected devices.
7On your compatible Bluetooth device, follow the on-screen
instructions to pair and connect to the discovered stereo.
When pairing, your compatible Bluetooth device may ask you
to confirm a code on the stereo. The stereo does not display
a code, but it does connect correctly when you confirm the
message on the Bluetooth device.
8If your compatible Bluetooth device does not immediately
connect to the stereo, repeat steps 1 through 7.
The DISCOVERABLE setting is disabled automatically after two
minutes.
Selecting a Different Bluetooth Source
When you have more than one Bluetooth device paired to the
stereo, you can select a different source when needed. You can
connect the stereo to up to eight Bluetooth devices.
1With the source selected, select .BT
2Select a Bluetooth device.
Bluetooth Source Settings
With the BT source selected, select .
DISCOVERABLE: Allows the stereo to be visible to Bluetooth
devices. You can turn off this setting to prevent possible
interruption to audio after pairing a Bluetooth device to the
stereo.
REMOVE DEVICE: Removes the Bluetooth device from the
stereo. To listen to audio from this Bluetooth device again,
you must pair the device again.
FUSION-Link Remote Control App
You can use the FUSION-Link remote control app on your
compatible Apple or Android device to adjust the stereo volume,
change the source, control playback, select and manage radio
presets, and adjust some stereo settings.You can use the app to
set up and configure DSP profiles on the stereo.You can use the
app to update the device software wirelessly
The app communicates with the stereo using the Bluetooth
connection for the mobile device. You must connect your
compatible device to the stereo using Bluetooth to use the app.
If you are using a FUSION PartyBus device on a network with a
Wi Fi‑® access point, the app can communicate with the device
using the network for greater range.
For information about the FUSION-Link remote control app for
compatible Apple or Android devices, go to the Apple App
StoreSM or the Google Play™ store.
Radio
To listen to AM or FM radio, you must have a suitable marine
AM/FM antenna properly connected to the stereo and be within
range of a broadcasting station. For instructions on connecting
an AM/FM antenna, see the stereo installation instructions.
Setting the Tuner Region
You must select the region you are in to receive AM and FM
stations properly.
1Select > > .SETTINGS TUNER REGION
2Select the region you are in.
Changing the Radio Station
1Select an applicable source, such as .FM
2Select to select a tuning mode.
You can use Auto mode to scan stations, Manual mode to
manually tune to a station, and Preset mode to select the
next preset station.
3Select or to tune to the station.
2 Bluetooth Device Playback
POWER OPTIONS: Adjusts power settings, such as standby
mode and power-save mode ( ).Power Options, page 4
NETWORK: Enables you to join and configure the FUSION
PartyBus network settings ( ).Network Settings, page 4
UPDATE > HEADUNIT: Updates the stereo software.
UPDATE > FACTORY RESET: Resets all settings to the factory
default values.
ABOUT: Shows the software version and other information for
the stereo.
Speaker Zone Settings
Select > > > .SETTINGS ZONE ZONE 1
VOLUME CONTROL: Allows the volume to be controlled by
another amplifier or stereo and provides a fixed line-level
output when the option button is cleared.
LOUD: Maintains frequency response at low volumes and
increases perceived loudness at high volumes.
TONE: Sets the treble, middle, and bass tones.
ZONE NAME: Sets a name for this speaker zone to make it
easier to identify.
SUB FREQ: Sets the subwoofer cutoff frequency, which can
enhance the blend of the sound produced by the speakers
and the subwoofer. Audio signals above the selected
frequency are not passed to the subwoofer.
MORE: Sets the volume limit, subwoofer limit, and speaker
balance.
Disabling the Internal Amplifiers
If the speakers are connected to an external amplifier, you can
disable the internal amplifier to reduce power consumption.
1Select > > .SETTINGS ZONE
2Select to clear the option button.INTERNAL AMP ON
Power Options
Select > > .SETTINGS POWER OPTIONS
NOTE: When an option button is filled, the option is on. When
the option button is clear, the option is off.
POWER SAVE: Disables the LCD backlight after one minute of
inactivity to save battery power.
STANDBY MODE: Enables a low-power standby instead of
turning off the stereo completely. When enabled, the stereo
turns on much faster, but the stereo uses more battery when
in standby mode than when turned off.
WAKE SYSTEM: Sends a signal to turn on all devices
connected to the network using an Ethernet cable that are in
standby mode.
Network Settings
Select > > .SETTINGS NETWORK
WI-FI OFF: Turns off all Wi Fi wireless functions.‑
WI-FI CLIENT: Configures the zone stereo as the wireless
client, allowing it to wirelessly connect to other devices.
WI-FI ACCESS POINT: Configures the zone stereo as the
wireless access point (Wireless Access Point Settings,
page 4).
ADVANCED: Allows you to set the advanced wireless and wired
settings, such as DHCP and SSID.
RESET: Resets all network settings for this stereo to the factory
default values.
Advanced Network Configuration
You can perform advanced networking tasks on a FUSION
PartyBus device, such as defining DHCP ranges and setting
static IP addresses.
Wireless Access Point Settings
Select > > > > SETTINGS NETWORK ADVANCED WI-FI
ACCESS POINT.
NOTE: You must configure the device to be a wireless access
point before you can change the settings.
SSID: Sets the SSID, or name, for the network.
AP SECURITY: Sets the type of wireless security protocol used
by the access point.
NOTE: It is strongly recommended that you set the AP
SECURITY using WPA2 PERSONAL. It is the most widely-
used and secure wireless security protocol.
PASSWORD: Sets the password for the access point. This is
not available when the AP SECURITY setting is set to
NONE.
COUNTRY: Sets the region where the stereo is located.
Different regions may use different channels on the wireless
spectrum, so you should set this to best accommodate local
wireless devices.
CHANNEL: Sets the access point to use a group of channels in
the high, low, or middle range of the available spectrum for
your region. You may experience better performance if you
set the channel in a range with fewer broadcasting access
points.
DHCP SERVER: Sets the device to act as a wireless access
point and the DHCP server on the network.
WPS: Initiates a Wi Fi Protected Setup (WPS) connection. ‑
Devices with a WPS button or setting can connect to the
access point on this stereo when the WPS connection is
active.
NOTE: It can take up to two minutes to successfully connect
to the access point after you select WPS.
DHCP Settings
Select > > > > SETTINGS NETWORK ADVANCED DHCP
SERVER.
DHCP ENABLED: Sets the device as the DHCP server on the
network.
START IP: Sets the first IP address in the IP-address range of
the DHCP server.
END IP: Sets the final IP address in the IP-address range of the
DHCP server.
Setting a Static IP Address
If the stereo is configured as a DHCP server, it is automatically
assigned the IP address of 192.168.0.1. You can change this IP
address.
If the stereo is a client on the network and you do not want the
DHCP server to automatically assign an IP address to the
stereo, you can set a static IP address.
NOTE: Every device on the network must have a unique IP
address. If you select a static IP address that is the same as the
IP address on the network, the devices will not work properly.
1Select > > > .SETTINGS NETWORK ADVANCED
2Select an option:
• If the stereo is connected using an Ethernet cable, select
ETHERNET IP STATIC IP > .
• If the stereo is set as a wireless access point or wireless
client, select .WI-FI STATIC IP
3Select an option:
• To set the IP address, select , and enter the IP address.IP
• To set the subnet mask, select , and enter the MASK
subnet mask.
NOTE: The subnet mask must match all other devices on
the network to work properly. A typical default gateway is
255.255.255.0.
4 General Settings
• To set the default gateway IP address, select , GATEWAY
and enter the gateway IP address.
NOTE: The default gateway is typically set as the IP
address of the DHCP server on the network.
4Select .SAVE
Resetting Network Settings
You can reset all network settings for this stereo to the factory
default values.
Select > > > > .SETTINGS NETWORK RESET YES
Appendix
Registering Your Apollo SRX400
Help us better support you by completing our online registration
today.
• Go to .www.fusionentertainment.com
• Keep the original sales receipt, or a photocopy, in a safe
place.
Cleaning the Device
1Dampen a soft, clean, lint-free cloth with fresh water.
2Gently wipe the device.
Software Updates
For best results, you should update the software in all FUSION
devices at the time of installation to ensure compatibility.
You can update the software using the FUSION-Link remote
control app on your compatible Apple or Android device. To
download the app and update the device software, go to the
Apple App Store or the Google Play store.
True-Marine™ Products
True-Marine products are subjected to rigorous environmental
testing under harsh marine conditions to surpass industry
guidelines for marine products.
Any product that bears the True-Marine stamp of assurance has
been designed for simplicity of use and combines advanced
marine technologies to deliver an industry leading entertainment
experience. All True-Marine products are supported by the
FUSION 3-year worldwide limited consumer warranty.
Specifications
General
Weight 340 g (12.0 oz.)
Water resistance IEC 60529 IPX7 (front of stereo only,
when properly installed)
Operating temperature range From 0 to 50°C (from 32 to 122°F)
Storage temperature range From -20 to 70°C (from -4 to 158°F)
Input voltage From 10.8 to 16 Vdc
Current (max.) 8 A
Current (muted) Less than 400 mA
Current (off, standby mode
enabled)
50 mA
Current (off, standby mode
disabled)
5 mA
Fuse 15 A blade type
Wi Fi wireless range Up to 32 m (105 ft.)‑
Bluetooth wireless range Up to 10 m (30 ft.)
Wireless frequencies/protocols Wi Fi 2.4 GHz @ 15 dBm nominal‑
Bluetooth 2.4 GHz @ 10 dBm nominal
Compass-safe distance 10 cm (3.9 in.)
On-board, Class D Amplifier
Output music power per channel 70 W max. x 2 at 4 ohm per channel
Total output music power 140 W max.
Output power per channel 35 W RMS x 2 at 2 ohm
Tuner Europe and
Australasia
USA Japan
FM radio
frequency range
87.5 to 108 MHz 87.5 to
107.9 MHz
76 to 95 MHz
FM frequency
step
50 kHz 200 kHz 50 kHz
AM radio
frequency range
522 to 1620 kHz 530 to
1710 kHz
522 to
1620 kHz
AM frequency
step
9 kHz 10 kHz 9 kHz
Troubleshooting
The stereo does not respond to key presses
• Press and hold for at least 10 seconds to reset the stereo.
My Bluetooth audio is interrupted by short breaks
• Ensure the media player is not covered or obstructed.
Bluetooth technology performs best with line-of-sight
operation.
• Bring the media player within 10 m (33 ft.) of the stereo.
• Turn off the setting after pairing a DISCOVERABLE
Bluetooth device to the stereo.
The stereo does not display all song information from
my Bluetooth source
The availability of song information such as song title, artist
name, track duration, and album cover artwork depends on the
capability of the media player and music application.
Network Troubleshooting
If you cannot see or connect to FUSION PartyBus devices on
the network, check the following:
• Verify that only one device, either a stereo or a router, is
configured as a DHCP server.
• Verify that all FUSION PartyBus devices, network switches,
routers, and wireless access points are connected to the
network and turned on.
• Verify that wireless FUSION PartyBus devices are connected
to a wireless router or wireless access point on the network.
• If you configured static IP addresses, verify that every device
has a unique IP address, that the first three sets of numbers
in the IP addresses match, and that the subnet masks on
every device are identical.
• If you have made configuration changes that might be
causing networking issues, reset all network settings to
factory defaults.
Appendix 5
Index
A
AM 2, 3
amplifier 4
Android devices 2
Apple devices 2
B
backlight 1
bass 1
Bluetooth devices 2
D
device
cleaning 5
registration 5
DSP 2
F
factory settings 5
FM 2, 3
FUSION PartyBus network 3–5
L
language 3
M
mute 1
N
network 3–5
network configuration 4
P
PartyBus 4, 5
presets 3
product registration 5
R
radio
AM 2
FM 2
registering the device 5
resetting 3
S
settings 2–4
source 1, 3
speaker zone 4
subwoofer 1
T
tone 1
treble 1
troubleshooting 5
V
volume 1
W
Wi Fi technology ‑3, 4
wireless devices, network configuration 4
6 Index
F U S I O N E N T E R T A I N M E
FUSION® Apollo™ SRX
Quick Start Man
Quick Start Manual 2
Manuel de démarrage rapide 8
Manuale di avvio rapido 16
Schnellstartanleitung 22
Guía de inicio rápido 30
Manual de início rápido 37
Snelstartgids 44
㉺抮⏴栏㓚␙ 51
$32//265;
4XLFN6WDUW0DQXDO
*HWWLQJ6WDUWHG
:$51,1*
6HHWKH,PSRUWDQW6DIHW\DQG3URGXFW
,QIRUPDWLRQJXLGHLQWKHSURGXFWER[IRU
SURGXFWZDUQLQJVDQGRWKHULPSRUWDQW
LQIRUPDWLRQ
*HWWLQJWKH2ZQHUV0DQXDO
<RXFDQJHWWKHODWHVWRZQHUVPDQXDODQG
WUDQVODWLRQVRIPDQXDOVIURPWKHZHE
*RWRZZZIXVLRQHQWHUWDLQPHQWFRP
PDULQH
6HOHFW\RXUSURGXFW
6HOHFW 0DQXDOV'RZQORDGV
6HOHFWDPDQXDO
$SROOR65;=RQH6WHUHR&RQWUROV
%XWWRQ )XQFWLRQ
'LDO 7XUQWRDGMXVWWKHYROXPHP
WKURXJKWKHPHQXVRUDGMXV
VHWWLQJ
3UHVVWRVHOHFWDQRSWLRQRU
VHWWLQJ
3UHVVDQGKROGWRVHOHFWWKH
WDELQWKHVFUHHQ
3UHVVWRWXUQRQWKHGHYLFH
3UHVVWRPXWHDQGXQPXWH
DXGLR
3UHVVDQGKROGWRWXUQRIIWK
GHYLFH
3UHVVWRRSHQWKHPHQX
3UHVVWRUHWXUQWRWKHSUHYLR
VFUHHQIURPWKHPHQX
3UHVVDQGKROGWRH[LWWKHP
3UHVVWRRSHQWKHVRXUFHVH
VFUHHQDQGVHOHFWDVRXUFH
)URPWKHVRXUFHVFUHHQSUH
DQGKROGWRMRLQWKH)86,21
3DUW\%XVQHWZRUN
4XLFN6WDUW
%XWWRQ )XQFWLRQ
%73UHVVWRVNLSWRWKHEHJLQQLQJ
RIWKHWUDFNRUWRWKHSUHYLRXV
WUDFN
$0)0
ƕ $XWRRU0DQXDOWXQLQJ3UHVVWR
WXQHWRWKHSUHYLRXVVWDWLRQ
ƕ 0DQXDO3UHVVDQGKROGIRU
IDVWHUVWDWLRQVNLSSLQJ
ƕ 3UHVHW3UHVVWRFKDQJHWRWKH
SUHYLRXVSUHVHWZLWKWZRRU
PRUHSUHVHWVVDYHG
%73UHVVWRSDXVHRUUHVXPHWKH
FXUUHQWWUDFN
$0)03UHVVWRF\FOHWKURXJKWKH
WXQLQJPRGHVDXWRPDQXDODQG
SUHVHWV
%73UHVVWRVNLSWRWKHQH[WWUDFN
$0)0
ƕ $XWRRU0DQXDOWXQLQJ3UHVVWR
WXQHWRWKHQH[WVWDWLRQ
ƕ 0DQXDO3UHVVDQGKROGIRU
IDVWHUVWDWLRQVNLSSLQJ
ƕ 3UHVHW3UHVVWRFKDQJHWRWKH
QH[WSUHVHWZLWKWZRRUPRUH
SUHVHWVVDYHG
$SROOR65;=RQH6WHUHR6FUHHQ
7KHLQIRUPDWLRQGLVSOD\HGRQWKHVFUHHQ
YDULHVGHSHQGLQJRQWKHVRXUFHVHOHFWHG
7KLVH[DPSOHVKRZVWKHGHYLF
WUDFNRQDGHYLFHFRQQHFWHGX
%OXHWRRWKZLUHOHVVWHFKQRORJ\
➀6RXUFH
➁$OEXPDUWLIDYDLODEOHIURPD
VRXUFH
➂7UDFNGHWDLOV
➃(ODSVHGWLPHDQGWUDFNGXUDWL
DYDLODEOH
6HOHFWLQJD6RXUFH
6HOHFW
7XUQWKHGLDOWRKLJKOLJKWD
3UHVVWKHGLDOWRVHOHFWWKH
$GMXVWLQJWKH9ROXPH
7XUQWKHGLDO
7,37RDGMXVWWKHVXEZRR
\RXFDQSUHVVDQGKROGWKH
4XLFN6WDUW0DQXDO
VHOHFWWKH68%/(9(/WDEDQGWXUQ
WKHGLDOWRDGMXVWWKHVXEZRRIHUOHYHO
0HGLD3OD\HU&RQQHFWLRQ
&RQQHFWLQJD&RPSDWLEOH%OXHWRRWK
'HYLFH
<RXFDQSOD\PHGLDIURPDFRPSDWLEOH
%OXHWRRWKGHYLFHXVLQJWKH%OXHWRRWK
ZLUHOHVVFRQQHFWLRQ
<RXFDQFRQWUROWKHPXVLFSOD\EDFNZLWK
WKHPHGLDDSSRQD%OXHWRRWKGHYLFHRU
XVLQJWKH)86,21/LQNUHPRWHFRQWURO
DSS
6HOHFWWKH VRXUFH%7
6HOHFW ! WR',6&29(5$%/(
PDNHWKHVWHUHRYLVLEOHWR\RXU
FRPSDWLEOH%OXHWRRWKGHYLFH
(QDEOH%OXHWRRWKRQ\RXUFRPSDWLEOH
%OXHWRRWKGHYLFH
%ULQJWKHFRPSDWLEOH%OXHWRRWKGHYLFH
ZLWKLQPIWRIWKHVWHUHR
2Q\RXUFRPSDWLEOH%OXHWRRWKGHYLFH
VHDUFKIRU%OXHWRRWKGHYLFHV
2Q\RXUFRPSDWLEOH%OXHWRRWKGHYLFH
VHOHFWWKHVWHUHRIURPWKHOLVWRI
GHWHFWHGGHYLFHV
2Q\RXUFRPSDWLEOH%OXHWRRWKGHYLFH
IROORZWKHRQVFUHHQLQVWUXFWLRQVWR
SDLUDQGFRQQHFWWRWKHGLVFRYHU
VWHUHR
:KHQSDLULQJ\RXUFRPSDWLEOH
%OXHWRRWKGHYLFHPD\DVN\RXWR
FRQILUPDFRGHRQWKHVWHUHR7K
VWHUHRGRHVQRWGLVSOD\DFRGH
GRHVFRQQHFWFRUUHFWO\ZKHQ\R
FRQILUPWKHPHVVDJHRQWKH%OX
GHYLFH
,I\RXUFRPSDWLEOH%OXHWRRWKGHY
GRHVQRWLPPHGLDWHO\FRQQHFWWR
VWHUHRUHSHDWVWHSVWKURXJK
7KH',6&29(5$%/(VHWWLQJLVGLV
DXWRPDWLFDOO\DIWHUWZRPLQXWHV
3OD\LQJ0HGLD
6HWWLQJWKH7XQHU5HJLRQ
<RXPXVWVHOHFWWKHUHJLRQ\RXDUH
UHFHLYH$0DQG)0VWDWLRQVSURSHU
6HOHFW ! !6(77,1*6 781(
5(*,21
6HOHFWWKHUHJLRQ\RXDUHLQ
&KDQJLQJWKH5DGLR6WDWLRQ
6HOHFWDQDSSOLFDEOHVRXUFHVXF
)0
6HOHFW WRVHOHFWDWXQLQJPRG
<RXFDQXVH$XWRPRGHWRVFDQ
VWDWLRQV0DQXDOPRGHWRPDQX
4XLFN6WDUW
Produkt Specifikationer
| Mærke: | Fusion |
| Kategori: | Radio |
| Model: | MS-SRX400 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Fusion MS-SRX400 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Radio Fusion Manualer
17 August 2024
16 August 2024
15 August 2024
15 August 2024
15 August 2024
15 August 2024
14 August 2024
14 August 2024
14 August 2024
14 August 2024
Radio Manualer
Nyeste Radio Manualer
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025