Installing door handles
Refrigerator GLR35BKER/GLR35RDER Use and Care Manual Support:800-562-0738
Compact Refrigerator
SAVE THIS INFORMATION FOR FUTURE REFERENCE
Important notice: Please keep this appliance standing upright
during transportation. If the unit must be laid on its side at any time,
please stand the appliance upright for at least 4 hours before using.
For all consumer questions or inquiries, contact our please U.S.
800-562-0738 .
customer service line at
1
2
3
4
5
6 8 10
7
GLR35 ER**
Model No.:
Refrigerator GLR35BKER/GLR35RDER Use and Care Manual Support:800-562-0738
Refrigerator GLR35BKER/GLR35RDER Use and Care Manual Support:800-562-0738
Refrigerator GLR35BKER/GLR35RDER Use and Care Manual Support:800-562-0738
Refrigerator GLR35BKER/GLR35RDER Use and Care Manual Support:800-562-0738
Refrigerator GLR35BKER/GLR35RDER Use and Care Manual Support:800-562-0738
Refrigerator GLR35BKER/GLR35RDER Use and Care Manual Support:800-562-0738
Refrigerator GLR35BKER/GLR35RDER Use and Care Manual Support:800-562-0738
Refrigerator GLR35BKER/GLR35RDER Use and Care Manual Support:800-562-0738
Refrigerator GLR35BKER/GLR35RDER Use and Care Manual Support:800-562-0738
Refrigerator GLR35BKER/GLR35RDER Use and Care Manual Support:800-562-0738
Refrigerator GLR35BKER/GLR35RDER Use and Care Manual Support:800-562-0738
800-562-0738
528429
Refrigerator GLR35BKER/GLR35RDER Use and Care Manual Support:800-562-0738
911
12
1
2
3
4
5
6
7
8
4.Crisper glass cover
5.Vegetable crisper
6.Rod
7.Lamp switch
8.Bottle guard
3.Removable glass shelf
2.Temperature control dial
1.Freezer compartment
19.17
23.31
35.16
0.60
55.12 lbs
Net weight
INSTALL THE HANDLES
2.Prepare a cross screwdriver.
3.Remove the screw hole sealing tape on the door.
4.Make sure the three screw holes in the shake hands are aligned
with those in the door, and then respectively screw them together.
The right side one is suggested to be preferred to be screwed down.
1.
handle covers, and six screws.
Take out accessory from packing bags: two handles, two shake
Handle Base Handle Cover Screw Socket Head Wrench
Sealing tape
5.Install handle cover on the handle.
Tips for the Steps to Install:
(1) Buckle the handle on the left side firs t.
(2) Buckle the handle on the left side.
(3) Buckle the middle part of the handle tightly in the end. And
a click can be heard if the handle is properly installed.
