GARDE 181ONSLC316 Manual

GARDE Skæremaskine 181ONSLC316

Læs gratis den danske manual til GARDE 181ONSLC316 (4 sider) i kategorien Skæremaskine. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om GARDE 181ONSLC316, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

USER MANUAL

1/4”

Item #181ONSLIC14

3/16”

Item #181ONSLC316

07/2020

Onion Slicers

Safety Instructions

Be careful when handling and operang the machine, as the blades are very sharp. Always keep your hands

away from the blades. When not in use, use the ring pin to secure the machine in the lockdown posion.

Operation

1) Remove ring pin from lockdown posion hole and place in the hole on the handle.

2) Use the handle to raise the push plate to the upright posion.

3) Carefully place produce on the blade surface. Make sure the produce isn’t larger than the blade surface.

a. Note: For proper funconality and slice size make sure the two appropriate blade cartridges are set

on top of one another.

4) Make sure hands/ngers are clear of the cung area.

5) With one rm, swi moon bring the handle down unl the push plate pushes the produce completely

through the blade cartridges.

Cleaning and Maintenance

1) To remove pusher assembly, remove the ring pin and use the handle to li the pusher assembly o of the

guide rods.

2) Carefully remove both blade assemblies from the main frame one at a me

3) Thoroughly clean the frame, blade assemblies, and pusher assembly.

4) Dry all components then replace the blade assembly, pusher assembly, and ring pin.

5) If necessary lubricate the guide rods with food grade mineral oil. Do NOT use cooking or vegetable oil.

Please read and comply with the instrucons listed on this document. To get the best service life and

performance from your machine, clean it thoroughly before and aer each use by following the instrucons

listed below. Minimize the use of alkaline cleaners as they may dull the nish and cause ping.

USER MANUAL

Produkt Specifikationer

Mærke:	GARDE
Kategori:	Skæremaskine
Model:	181ONSLC316

Har du brug for hjælp?

Hvis du har brug for hjælp til GARDE 181ONSLC316 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skæremaskine GARDE Manualer

GARDE 181DC1 Manual

17 Juni 2025

GARDE 181CHEESE34 Manual

15 Juni 2025

GARDE 181CHKSLC14 Manual

15 Juni 2025

GARDE 181CHKSLC12 Manual

15 Juni 2025

GARDE 181DC38 Manual

15 Juni 2025

GARDE 181FCWDG6 Manual

15 Juni 2025

GARDE 181DC14 Manual

15 Juni 2025

GARDE 181CHEESE38 Manual

15 Juni 2025

GARDE 181PBA12 Manual

15 Juni 2025

GARDE 181PPB1412 Manual

15 Juni 2025

Skæremaskine Manualer

Nyeste Skæremaskine Manualer

Dito Sama CC0H69 Manual

12 August 2025

Dito Sama 600976 Manual

12 August 2025

Dito Sama 600972 Manual

12 August 2025

Dito Sama 602068 Manual

12 August 2025

Dito Sama 600978 Manual

12 August 2025

Dito Sama 600432 Manual

12 August 2025

Dito Sama 600431 Manual

12 August 2025

Dito Sama 600439 Manual

12 August 2025

Dito Sama 600425 Manual

12 August 2025

Dito Sama 600975 Manual

12 August 2025