GARDE 181WEDGE8 Manual

GARDE Skæremaskine 181WEDGE8

Læs gratis den danske manual til GARDE 181WEDGE8 (4 sider) i kategorien Skæremaskine. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om GARDE 181WEDGE8, eller vil du spørge andre brugere om produktet?

Side 1/4

4 Section

Item #181WEDGE4

6 Section

Item #181WEDGE6

8 Section

Item #181WEDGE8

8 Section

Apple Corer

Item #181CORE8

10 Section

Item #181WEDGE10

12/2021

Fruit & Vegetable Wedgers

Safety Instrucons

Be careful when handling and operang the machine, as the blades are very sharp. Always keep your hands

away from the blades.

Preparaon

1) This unit comes fully assembled.

2) Place the unit on a sturdy work surface.

Operaon

1) Li the push block and place the produce on the blade assembly.

2) Remove hands and ngers from the cung area and bring the push block down to force the produce

through the blades.

3) Clean the machine aer wedging is completed using the instrucons below.

Cleaning and Maintenance

1) Li the pusher block from the guide rods.

2) Remove the screws from the boom of the frame to release the blade assembly.

3) Wash the push block, blade assembly, and frame thoroughly.

4) To re-assemble, reverse the procedure.

5) When needed, lubricate the guide rods with mineral oil, food grade grease, or paran.

Do not use cooking oil.

Please read and comply with the instrucons listed on this document. To get the best service life

and performance from your machine, clean it thoroughly before and aer each use by following the

instrucons listed below. Minimize the use of alkaline cleaners as they may dull the nish and cause ping.

Produkt Specifikationer

Mærke:	GARDE
Kategori:	Skæremaskine
Model:	181WEDGE8

Har du brug for hjælp?

Hvis du har brug for hjælp til GARDE 181WEDGE8 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skæremaskine GARDE Manualer

GARDE 181FC14WM Manual

14 Juni 2025

GARDE 181FCWDG6WM Manual

14 Juni 2025

GARDE 181FC12SC Manual

14 Juni 2025

GARDE 181TSLC38 Manual

13 Juni 2025

GARDE 181WEDGE6 Manual

13 Juni 2025

GARDE 181WEDGE10 Manual

13 Juni 2025

GARDE 181WEDGE4 Manual

13 Juni 2025

GARDE 181FCWDG8 Manual

13 Juni 2025

GARDE 181WEDGE8 Manual

13 Juni 2025

GARDE 181ROTSLICE Manual

21 August 2024

Skæremaskine Manualer

Nyeste Skæremaskine Manualer

Vollrath 700-1 Manual

14 Juni 2025

Nemco 57500-6 Manual

14 Juni 2025

Globe SG13 Manual

14 Juni 2025

Vollrath 606N Manual

14 Juni 2025

Choice 40725TS Manual

14 Juni 2025

Vollrath 400N Manual

14 Juni 2025

Vollrath 47703 Manual

14 Juni 2025

Nemco 55200AN Manual

14 Juni 2025

Doyon CPF422 Manual

14 Juni 2025

Nemco 55125 Manual

14 Juni 2025