Garmin eTrex Venture Cx Manual

Garmin Navigator eTrex Venture Cx

Læs gratis den danske manual til Garmin eTrex Venture Cx (2 sider) i kategorien Navigator. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Garmin eTrex Venture Cx, eller vil du spørge andre brugere om produktet?

Side 1/2
Quit key
Power/
Backlight
key
personal navigator®
quick reference guide
eTrex® Venture Cx
and Legend Cx
Marking a Waypoint
To mark your current location:
1. Press and hold to open the Enter
Mark Waypoint Page.
2. To accept the waypoint with the
default information, highlight , OK
and press .Enter
OR
To change any information on the
Mark Waypoint Page, highlight the
appropriate field, and press to open the on-screen Enter
keypad. After entering and confirming your changes,
highlight , and press .OK Enter
To create a new waypoint using the Map Page:
1. Open the Map Page, and use the to move Rocker
the pointer ( ) to the map item you want to mark as a
waypoint.
2. Press and quickly release to Enter
capture the pointer location.
If you highlighted a map feature,
an information page appears.
Highlight , and press to Save Enter
save the item as a waypoint.
OR
If the map item selected contains
no information, a “No map information at this point. Do you
want to create a user waypoint here?” message appears.
Highlight Yes Enter, and press .
Finding Map Items
To find an item from your current location:
1. Press and hold the key to open the Find Menu.Menu
2. Highlight a category icon (Waypoints Cities Exits, , , for
example), and press .Enter
3. Use the to highlight an item, and press to Rocker Enter
open the information page for the selected item.
Going to a Destination
To Go To a highlighted map item:
1. Use the to highlight the item you want to navigate Rocker
to on the Map Page.
2. Press and quickly release to capture the pointer Enter
location ( ) and open the information page.
3. Highlight Go To Enter, and press to begin navigation.
4. Follow the magenta route created on the Map Page. You
can also use the Compass Page to help you navigate to
the point.
To initiate a Go To from the Find Menu:
1. Press the key to open the Find Menu.Find
2. Highlight the Waypoint Enter icon, and press to open the
Waypoints Page.
3. Use the to select a waypoint, and press . Rocker Enter
The Waypoint Page opens.
4. Highlight Go To Enter, and press to begin navigation.
To go to a recently found item:
1. Press the key to open the Find Find
Menu.
2. Highlight the icon, Recent Finds
and press to open the Recent Enter
Finds Page.
3. Use the to select an item to Rocker
go to, and press to open the Enter
information page for the item.
4. Highlight Go To Enter, and press to begin navigation.
190-00679-01 Rev. A © Copyright 2006 Garmin Ltd. or its subsidiaries Printed in Taiwan
To find an item from another location using the Find
Menu:
1. Press the key to open the Find Menu.Find
2. Highlight a category icon (Waypoints Cities Exits, , , for
example), and press .Enter
3. Press the key to open the Options Menu.Menu
4. Highlight , and press .Change Reference Enter
5. Use the to select a reference point on the map, Rocker
and press . The list changes to show items nearest Enter
to the new map location.
Waypoints ListFind Menu Information Page
GPS antenna
In/Out (Zoom)
keys
Enter/Rocker
key
Menu/Find
key
Color LCD display
NOTE: For the Find Menu to display all of the categories shown above, MapSource detailed map
data must be downloaded to the microSD or TransFlash card. (Refer to the owner’s manual for
detailed information.)
(eTrex Legend shown)
Creating a Route
To create and use a route:
1. Access the Routes Page from the Main
Menu. The page has a button, an New
Active button, and space for a list of
saved routes.
2. Use the key to highlight the Rocker
New Enter button, and then press to
display the Route Setup Page.
3. With an empty row (dashed) in the
route list highlighted, press to display the Find Enter
Menu.
4.
Use the Find Menu to select a route
waypoint from one of the Find Menu
map item groups. Display the information
page for the selected item, highlight the
on-screen button, and press to Use Enter
add it to the route list of via points.
5. To add more via points to your route,
repeat the process.
6. When you have completed the route, highlight the
Navigate button to begin calculation of
the route and navigation using the Map
Page.
7. Follow the instructions at the top of the
Map Page, the magenta route overlay
on the map, and turn-by-turn pop-up
prompts.
8.
To stop navigation at any time, press
the key, select ,Menu Stop Navigation
and press . The route is automatically saved to the Enter
Routes List. To resume navigation, return to the Options
Menu, select , and press .Resume Navigation Enter
Using the Keypad Getting Started
To install the batteries:
1.
Remove the battery
cover from the back of
the unit by turning the
D-Ring 1/4 turn counter-
clockwise and pulling the
cover away.
2.
Insert two AA batteries,
and replace the
battery cover.
3. Turn the D-Ring 1/4
turn clockwise to lock
the cover in place.
To turn on your eTrex:
1. Press and hold the
Power key. A tone
sounds, and the Introduction Page appears, followed by
the Satellite Page.
The GPS receiver begins searching for satellite signals.
When the receiver has signals from at least three
satellites, the display at the top of the page indicates
position accuracy and location coordinates.
2.
Press the key repeatedly until the Map Page appears. Quit
You are now ready to begin GPS-aided navigation.
To adjust the backlight level:
1. Press and quickly release the key to Power
open the backlight adjustment slider.
2. Press up on the to increase the Rocker
brightness, or press down to decrease.
3. Press or the key to close the Enter Quit
backlight adjustment window.
Main Pages
The eTrex Venture Cx and Legend Cx have three recurring main
pages and one that displays only with each start-up. Press and
release the key to cycle through the page sequence.Quit
Map Page
Satellite Page
Compass Page—guides you to your destination.
Main Menu—contains advanced features and settings.
Compass Page Main Menu
Satellite Page—appears only at start-up and shows the GPS
receiver status, satellite locations, satellite signal strength, and the
receivers current location.
Map Page—shows a detailed map of the area around your
current location.
Power/Backlight key—press and hold to turn
the unit on or off. Press and release to adjust the
backlighting, view the date or time, and view
the battery capacity.
In/Out Zoom keys—from the Map Page, press
to zoom in or out. From any other page, press to
scroll up or down a list.
Menu/Find key—press and release to view op-
tions for a page. Press twice to view the Main
Menu. Press and hold to display the Find Menu.
Quit key—press to cycle through the main pages.
Press and release to cancel data entry or exit a
page.
Enter/Rocker key—press and release to enter
highlighted options and data or confirm on-
screen messages. Press and hold to mark your
current location as a waypoint. Move up, down,
right, or left to move through lists; highlight
fields, on-screen buttons, or icons; enter data; or
to move the map panning arrow.
(Press down to Enter. Move to the side or up or down to scroll,
move the cursor, or increase or decrease values.)
Route Setup
Routes List
Route on Map
Battery compartment
PUSH TO EJECT
Locking
pin slot
microSD
or
TransFlash
card slot


Produkt Specifikationer

Mærke: Garmin
Kategori: Navigator
Model: eTrex Venture Cx

Har du brug for hjælp?

Hvis du har brug for hjælp til Garmin eTrex Venture Cx stil et spørgsmål nedenfor, og andre brugere vil svare dig