Garmin inReach SE+ Manual

Garmin Navigator inReach SE+

Læs gratis den danske manual til Garmin inReach SE+ (20 sider) i kategorien Navigator. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Garmin inReach SE+, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

INREACH® POWERED MOUNT

Installation Instructions 2

Instructions d'installation 3

Istruzioni di installazione 5

Installationsanweisungen 7

Instrucciones de instalación 9

Instruções de instalação 11

Installatie-instructies 12

Installationsvejledning 13

Asennusohjeet 14

Installeringsinstruksjoner 15

Installationsinstruktioner 16

Instrukcja instalacji 17

Navodila za namestitev 18

Upute za instalaciju 19

Garmin®, the Garmin logo, and inReach® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of

Garmin.

El número de registro COFETEL/IFETEL puede ser revisado en el manual a través de la siguiente página de internet.

December 2016 190-02165-92_0APrinted in Taiwan

INREACH® POWERED MOUNT

Installation Instructions

Important Safety Information

WARNING

See the guide in the Important Safety and Product Information

GPS device product box for product warnings and other

important information.

Installing the Device in the Mount

NOTICE

Before you place the device in the mount, ensure the metal

contacts on the device and the mount are dry. Moisture on the

contacts causes equipment damage. Use the weather cap to

keep the mount dry.

1Place the weather cap À

in the storage area on the mount.

2Align the mounting spine with the notches on the mount, and

slide the device down until it snaps into place.

Removing the Device from the Mount

1Press the tab À on the mount to release the device.

2Lift the device out of the mount.

3Place the weather cap on the metal contacts.

Connecting Power to the Mount

1Select a mounting location based on available power sources

and an unobstructed view of your surroundings.

2Route the USB cable, and connect it to a power source.

Attaching an AMPS Base Plate to the Mount

NOTE: The base plate is not included with all powered mounts.

1Thread the screws À through the washers Á, mount Â, and

base plate Ã.

2Tighten the nuts Ä to secure the base plate.

NOTE: The recommended torque is 1.7 to 2.25 N-m (15 to

20 lbf-in.).

Mounting the Device in an Automobile

1Clean and dry your windshield and the suction cup with a lint-

free cloth.

2Press the suction cup to the windshield, and flip the lever

clockwise.

3Align the ball of the suction cup mount and the ball of the

base plate Á with the double-socket arm Â.

4Tighten the knob Ã

slightly.

5If necessary, adjust for better viewing and operation.

6Tighten the knob to secure the mount.

2 Installation Instructions

Produkt Specifikationer

Mærke:	Garmin
Kategori:	Navigator
Model:	inReach SE+
Kode for international beskyttelse (IP):	IPX7
Bredde:	68 mm
Dybde:	38 mm
Højde:	164 mm
Vægt:	213 g
Brugervejledning:	Ja
Produktfarve:	Black, Yellow
Skærm diagonal:	2.31 "
Skærmopløsning:	200 x 265 pixel
Kompatible hukommelseskort:	Ikke understøttet
Bluetooth:	Ja
Batteriteknologi:	Lithium-Ion (Li-Ion)
Formfaktor:	Håndholdt
Indbyggede højttaler(e):	Ja
Skærm:	TFT
Strømkilde type:	Batteri
Indbygget kamera:	Ingen
Understøttede radiobånd:	Ikke understøttet
Marine (kortplottere, ekkolod):	Ingen
Udendørs (vandring, trekking):	Ja
Automatisk:	Ingen
Luftfart:	Ingen
Lastbil:	Ja
Autocamper/campingvogn:	Ingen
Golf:	Ingen
Rute undgåelse:	Ja
Kort inkluderet:	Ja
Tekst-til-tale-besked læser:	Ja
Cykel:	Ingen
Antal ruter:	20
Styringspunkter:	Ja
Antal styringspunkter:	500