Garmin Montana Marine Mount Manual

Garmin Navigator Montana Marine Mount

Læs gratis den danske manual til Garmin Montana Marine Mount (87 sider) i kategorien Navigator. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Garmin Montana Marine Mount, eller vil du spørge andre brugere om produktet?

Side 1/87
Instructions
Instructions
Istruzioni
Anweisungen
Instrucciones
Instruções
Instructies
Instruktioner
Ohjeet
Instruksjoner
Instruktioner
Instrukcja
Pokyny
Инструкции
Marine Mount
MONTANA 600 Series
2 Montana600SeriesMarineMountInstructions

See the Important Safety and Product Information in the Montana product box
before installing the marine mount.

Always wear safety goggles, ear protection, and a dust mask when drilling,
cutting, or sanding.
notice
Incorrectly wiring the power or audio cable with bare wire leads can result
in damage to the boat or the battery. Garmin strongly recommends having an
experienced installer with the proper knowledge of electrical systems install the
mount.
The metal contacts on the Montana and the mount should be kept dry to avoid
equipment damage. Use the weather cap on the mount at all times when the unit is
not mounted to keep the metal contacts dry and protected.

Drill
Hardware for the swivel mount: 3 bolts or 3 screws (not included)
#8 (4 mm) pan-head machine bolts with matching nuts and washers and
a 5/32 in. (5 mm) drill bit
#8 (4 mm) pan-head self-tapping screws and a 1/16 in. (1.5 mm) drill bit
for drilling starter holes


Produkt Specifikationer

Mærke: Garmin
Kategori: Navigator
Model: Montana Marine Mount

Har du brug for hjælp?

Hvis du har brug for hjælp til Garmin Montana Marine Mount stil et spørgsmål nedenfor, og andre brugere vil svare dig