Gasmate Caterer BQ1051 Manual

Gasmate barbecue Caterer BQ1051

Læs gratis den danske manual til Gasmate Caterer BQ1051 (16 sider) i kategorien barbecue. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Gasmate Caterer BQ1051, eller vil du spørge andre brugere om produktet?

Side 1/16
Model No. BQ1050
Model No. BQ1051
Ideal heavy duty BBQ for sporting and social clubs
or anywhere large groups are entertained
Solid 5mm thick steel hotplate
Castors for easy moving
Stainless steel burners
Removable lid that doubles as a windshield
Foldable side shelves
Propane Gas
Gas Certified to Australian and New Zealand Standards
Important: Retain these instructions for future use.
03339 09/17
Gasmate® is a registered trademark of:
Sitro Group Australia Pty Ltd www.gasmate.com.au
Aber, N.Z. www.gasmate.co.nz
CATERER
4 & 6 BURNER BBQ
2
CONTENTS
Section Page
General Information 2-4
Parts List & Hardware List 5-6
Assembly Instructions 7-11
Care & Maintenance 12
Lighting Procedure 13
Burner Operation & Operating Procedure 14
Safe Appliance Locations 15
GENERAL INFORMATION
Gas Installation Codes
Barbecues must be used in accordance with the
installation requirements of your gas supply authority,
or the appropriate installation code issued by
Standards Australia AS 5601.
Barbecues for use with bottled gas are labelled
‘Propane Gas’.
Barbecues for use with natural gas are labelled
‘natural gas’ and must be installed by an authorised
person. Check the gas type sticker attached to the
barbecue.
Clearances
Minimum Clearances from combustible materials
must be:
Rear - 300mm Sides - 300mm Above - 800mm
Hose & Regulator Safety
The regulator and hose assembly supplied with the
barbecue are suitable for Propane Gas only. A gas
regulator adjusted to have an outlet pressure of 2.75kPA
is supplied for connection to the propane gas cylinder.
The pressure regulator and hose assembly supplied
with the barbecue must be used. Replacement pressure
regulators and hose assemblies must be those specified
by the barbecue manufacturer.
When connecting the hose and regulator assembly to the
gas cylinder, take care to avoid unnecessary twisting of
the flexible hose.
After the assembly has been secured, turn on the gas
and check for leaks by brushing a soap and water
solution over all connections.
If you are unable to correct the leak by tightening the
connections, turn off the gas and contact the supplier
immediately.
Always ensure the barbecue is kept away from flammable
materials and the gas cylinder clear of any heat source.
When changing over from an empty gas cylinder to a full
one make sure this procedure is carried out in a flame
free atmosphere.
Specifications
Barbecue specifications can be found on the data label
attached to the barbecue body.
Hose connection thread at gas inlet is 1/4” B.S.P.


Produkt Specifikationer

Mærke: Gasmate
Kategori: barbecue
Model: Caterer BQ1051

Har du brug for hjælp?

Hvis du har brug for hjælp til Gasmate Caterer BQ1051 stil et spørgsmål nedenfor, og andre brugere vil svare dig