GBC Velobind V800 Pro Manual

GBC Ikke kategoriseret Velobind V800 Pro

Læs gratis den danske manual til GBC Velobind V800 Pro (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om GBC Velobind V800 Pro, eller vil du spørge andre brugere om produktet?

Side 1/6
1.0 INTRODUCTION
1.1 OPERATIONAL COMPONENTS LAYOUT
Figure 1-1
1-2
Pressure Bar
Handle
Housing
Base
Waste Tray
Punch Guide
Light
Bind Guide
Locating Pin
Backstop
Strip Recess
2.0 SPECIFICATIONS
DESCRIPTION: Punch/Binder
PUNCH CAPACITY:* 1/8 in. (3.2 mm) X 14 in. (355.6 mm)
25 sheets of 20 lb. bond paper
*Note: No more than 4 composition covers, or
3 plastic covers should be punched at one time.
Punching stacks of these materials may result
in damage to the punch mechanism.
BIND CAPACITY: 1 in. (25 mm) X 14 in. (355.6 mm)
250 pages of 20 lb. bond paper
ELECTRICAL REQUIREMENTS: 120 VAC 230 VAC 100 VAC
60 Hertz 50 Hertz 50 Hertz
3 Amps 1.5 Amps 1.5 Amps
409.56 B.T.U.'s per hour
3-wire grounded outlet
CYCLE SPEED: 2 second punch cycle
8-10 second bind cycle
DIMENSIONS: 20 in. (50.8 cm) wide
7 in. (17.8 cm) high
15 in. (38.1 cm) deep
WEIGHT: 28 lbs. (12.7 kg)
2-1


Produkt Specifikationer

Mærke: GBC
Kategori: Ikke kategoriseret
Model: Velobind V800 Pro

Har du brug for hjælp?

Hvis du har brug for hjælp til GBC Velobind V800 Pro stil et spørgsmål nedenfor, og andre brugere vil svare dig