GE GPF525C Manual
GE
Opvaskemaskine
GPF525C
Læs gratis den danske manual til GE GPF525C (4 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 46 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 23.5 anmeldelser. Har du et spørgsmål om GE GPF525C, eller vil du spørge andre brugere om produktet?
Side 1/4
GE Consumer & Industrial
Appliances
Installation Instructions
Dishwasher 1/4" Custom Panel Trim Kit
GPF525 Series
GPF525B-Black Trim Kit, GPF525C-Bisque Trim Kit, GPF525W-White Trim Kit
IMPORTANT – Save these instructions for local
inspector’s use.
IMPORTANT – Observe all governing codes and
ordinances
Note to Installer – Be sure to leave these instructions with
the Consumer.
Note to Consumer – Keep these instructions with your
Owner’s Manual for future reference.
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
WARNING:
To prevent electric shock, disconnect electrical power
supply to dishwasher before changing panels. Do not
operate dishwasher while changing panels or when
toekick assembly is removed.
TOOLS AND MATERIALS REQUIRED:
• 1/4" socket driver
• Phillips screwdriver
• Electric drill
• 1/8" drill bit
• Masking tape
• Safety Glasses
• Gloves to protect against sharp edges
KIT INCLUDES:
• Installation Instructions
• Left, right, top and bottom door trim
• 8 – 18 x 5/16" color-matched screws
IMPORTANT!
The factory supplied door springs must
be replaced with two WD03X10012 door
springs if the custom panel weighs more
than 3.5 pounds. Order these springs at
GE.COM or call 1-800-626-2002. Refer to
Step 4 for more information
STEP 1: CUT 1/4" THICK CUSTOM PANELS TO SIZE
• Cut door panel to the dimensions shown.
NOTE: The trim provided will conceal the cut edges of the
panels.
STEP 2: REMOVE TOEKICK ASSEMBLY
• Make sure electrical power to the dishwasher is turned off.
• Remove the two toekick panel screws and toekick panel. Set
them aside for use in Step 6.
NOTE: Do not remove the insulation behind the toekick.
2
INSTALLATION OPTIONS
This trim kit is designed to accommodate 1/4" thick panels.
A raised panel screwed or glued to 1/4" thick backing can be
used. The raised portion of the panel must be fabricated to
permit clearances for the trim on all sides.
A 3/4” thick custom panel may be installed by routing the top
and sides to 1/4" thickness.
Produkt Specifikationer
| Mærke: | GE |
| Kategori: | Opvaskemaskine |
| Model: | GPF525C |
Har du brug for hjælp?
Hvis du har brug for hjælp til GE GPF525C stil et spørgsmål nedenfor, og andre brugere vil svare dig
Opvaskemaskine GE Manualer
9 Januar 2025
9 Januar 2025
9 Januar 2025
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
Opvaskemaskine Manualer
- KitchenAid
- Salora
- WEG
- Samsung
- SVAN
- Hyundai
- Milectric
- Electrolux
- Inventum
- Gaggenau
- Haier
- Russell Hobbs
- Rommer
- Matrix
- Atlantic
Nyeste Opvaskemaskine Manualer
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025