Geonaute G-Eye 2 WiFi Remote Manual

Geonaute Digital kamera G-Eye 2 WiFi Remote

Læs gratis den danske manual til Geonaute G-Eye 2 WiFi Remote (5 sider) i kategorien Digital kamera. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Geonaute G-Eye 2 WiFi Remote, eller vil du spørge andre brugere om produktet?

Side 1/5
1
EN G-Eye 2
WiFi Remote
WAIT HOST PBC PRESS CONNECT
info SYNC
CONNECT
100-088
2H30
1080P- 50
Power indicator
(red) WiFi status indicator (blue)
Screen
On/off button - Video recording
button
Shutter button
Stop recording video
button
Loop for the strap
Wide angle of view
Medium angle of view
Narrow angle of view
Small angle of view
USB port
REMOTE CONTROL DESCRIPTION
The remote control has a battery life of 5 hours maximum.
Recharging takes approximately 2 hours.
2h
12
6
39
CHARGING THE BATTERY
2
1Switch on the camera and activate its WiFi function
2On the remote control, start by pressing the " " button, and press
the " " button at the same time. Keep holding these two buttons
until the remote control displays the screen opposite.
WAIT HOST PBC
3Push the " " button on the camera and wait 20-30 seconds, until
the remote control displays the screen opposite.
PRESS CONNECT
4Push the " " button on the remote control and wait 20-30 seconds,
until the remote control displays the screen opposite. info SYNC
CONNECT
5The blue indicator light on the remote control will then start blinking,
and conguration information is in the process of synchronising
between the remote control and the camera. Wait for approximately
20 seconds for the camera's status to appear on the remote control:
100-088
2H30
1080P- 50
CAUTION: For a connection to be possible, the pairing procedure must be performed rst.
1Press the On " " button for 5 seconds.
2The remote control automatically scans to look for the camera it is
meant to pair with.
3Once the camera has been found and correctly connected, the
screen on the remote control will display the camera's status.
100-088
2H30
1080P- 50
4You can now use the remote to control the camera.
5To turn off the remote control, press the Off button for 5 seconds.
PAIRING PROCEDURE
CONNECTING THE REMOTE CONTROL


Produkt Specifikationer

Mærke: Geonaute
Kategori: Digital kamera
Model: G-Eye 2 WiFi Remote

Har du brug for hjælp?

Hvis du har brug for hjælp til Geonaute G-Eye 2 WiFi Remote stil et spørgsmål nedenfor, og andre brugere vil svare dig




Digital kamera Geonaute Manualer

Digital kamera Manualer

Nyeste Digital kamera Manualer