GFI System Orca Manual


Læs gratis den danske manual til GFI System Orca (9 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 19 anmeldelser. Har du et spørgsmål om GFI System Orca, eller vil du spørge andre brugere om produktet?

Side 1/9
User Manual
O R C A
DELAY
Table of Contents
1 Inputs Page 1
2 Outputs 1
3 Expression Input 1
4 Tap-Tempo Input 2
5 Knobs and Buttons 3
8 Options 6
9 Global Settings 6
10 Exp ression / Ramping Setup 7
11 Factor y Reset 8
6 Footswitches and LEDs 4
7 Saving Presets 5
U S E R M A N U A L
1
User Manual
O R C A
DELAY
U S E R M A N U A L
1. Inputs
Orca accepts mono input or stereo inputs. For mono input operaon use a standard mono (TS) patch
cable and for stereo operaon use a stereo (TRS) cable. If the stereo input signals come from an
equipment that has separate Le and Right channel output jacks you will need to use a splier cable
like this:
TRS
TS
TS
To obtain the opmal sound quality, depending whether you use Mono or Stereo inputs,
the pedal must be congured accordingly. This is done in . Global Setngs
Hold the MODES buon for 2 secs to enter global seng.
Globals
1. Input
> MONO
> STEREO
2. Outputs
Orca may be used for mono output or stereo outputs. For mono output use a standard mono (TS)
patch cable and for stereo outputs use a stereo (TRS) cable. If the stereo output signals are fed to
an equipment that has separate Le and Right channel input jacks you will need to use a splier
cable like the one pictured above.
You do not need to congure anything for using mono or stereo outputs.
Set to MONO when using mono input.
Set to STEREO when using stereo input.


Produkt Specifikationer

Mærke: GFI System
Kategori: Ikke kategoriseret
Model: Orca

Har du brug for hjælp?

Hvis du har brug for hjælp til GFI System Orca stil et spørgsmål nedenfor, og andre brugere vil svare dig