The handset at a glance
1 Charge status of the
batteries
2 Signal strength
3 Display keys
4 End call key and On/Off key
5 Talk key/Handsfree key
6 Control key (p)
ª Audio settings
INT Internal call
âDirectory
|Muting during a call
7 Key 1
network mailbox
8 Star key
Ringers on/off (press and hold);
with an open connection:
switch from pulse dialling to
tone dialling (press briefly)
9 Key 0/recall key
Consultation call (flash): press
and hold
10 Hash key
Keypad lock on/off (press and
hold); toggles between upper/
lower case and digits; inserts a
dialling pause (press and hold)
11 Microphone
Handset display keys:
Pressing a key launches the function
that appears above that key in the dis-
play.
Please note
New messages in the calls list/net-
work mailbox list are indicated in
the display by the message New
messages, the left display key
flashes (if set ¢ page 8).
Display Function when pressed
’Open calls list (¢ page 8).
§Menu§ Open main/submenu
(see menu overview
¢ page 21).
” Go back one menu level.
YScroll up/down or adjust vol-
ume with q.
X Move cursor to left/right
with r.
ÜBackspace deletes one
character at a time.
§OK§ Confirm menu function or
save entry.
The base station at a glance
Registration/paging key:
Search for handsets (press
briefly, paging ¢ page 9)
Register handsets (press and
hold ¢ page 10).
ECO DECT
During a call, the transmission power is automatically adjusted to the distance
between handset and base station, the smaller the distance, the lower the
transmission power (radiation). In idle status the transmission power of the
handset is switched off. Only the base station ensures contact with the hand-
set using low radio signals.
Your phone offers you the opportunity to further reduce the transmission
power:
1) Reducing transmission power (eco mode)
If the setting Max. Range is switched to off (menu tree ¢ page 21), the trans-
mission power in standby mode and during a call is reduced up to 80% at half
range.
2) Deactivating transmission power (eco mode+)
With the setting No Radiation (menu tree ¢ page 21), you turn off the trans-
mission power of the base station in standby mode completely. Please note:
◆ All registered handsets must support this feature.
◆ For quick connection of incoming calls the handset repeatedly switches
to reception mode for short periods. This increases energy consumption
and therefore reduces the standby and talk times.
