Gigaset S820 Manual

Gigaset Telefon S820

Læs gratis den danske manual til Gigaset S820 (3 sider) i kategorien Telefon. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Gigaset S820, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Pack contents

If you have purchased a model with

multiple handsets, the package

should contain two batteries, one

battery cover, one rubber seal for

the USB connection, one belt clip

and one charger with a power 1

adapter for each additional 2

handset.

1 one Gigaset Base station

2 one power adapter for the base

3 one phone cord

4 one Gigaset handset

5 two batteries

6 one battery cover

7 one rubber seal for the USB connection

8 one belt clip

9 one user guide plus one Quick start

guide

Connecting the base station

¤ Plug the telephone cable into the

connection socket on the back of the 1

base until it clicks into place; then push

the cable into the clips.

¤ Plug the power adapter cable into the

socket on the back of the base and 2

twist the angle plug underneath the

cable clips.

¤ First, connect the power adapter .3

¤ Then connect the phone jack .4

Please note:

¤ The power adapter must always be connected, as the phone will not operate without a

power supply.

¤ Use only the power adapter and phone cord . Pin connections on telephone supplied

cables can vary.

Connecting the handset charger (if included)

¤ Connect the flat plug to the power adapter .1

¤ Plug the power adapter into the plug socket .2

If you have to remove the plug from the charger

again:

¤ Disconnect the power adapter from the mains

power supply.

¤ Press the release button and disconnect the 3

plug . 4

Frequently asked questions

Q: There is no dial tone.

A: Press call button for 2 seconds (long press) to obtain dial tone.

A short press opens the redial list.

Q: The line is crackling / not clear.

A: Have you used the new line cable provided? Please do not use an old cable.

Q: The display is not clear / seems to be broken.

A: The display is protected by a plastic film, please make sure you have removed

the protective film.

Q: The handset is not registered.

A: If your handset is not registered, please follow the Registration handset procedure.

(see user manual)

Q: The caller ID is not working.

A: Have you subscribed to this service (CLIP) from your provider?

Q: Message indicator flashing and I cannot retrieve my message.

A: Message indicator will flash to indicate missed calls as well as new messages of text mes-

sages. (see user manual)

Please check:

Have you used the phone cord supplied ¨

Have you fully inserted the power cable into the base station ¨

Have you inserted the batteries correctly ¨

Have you charged the battery for 9.5 hours ¨

Have you set up the Date/Time ¨

To download the latest manuals, visit our web-site: http://www.gigaset.com

You have questions? As a Gigaset customer, you can take advantage of our comprehensive

service offerings. You can find help quickly in this User Manual and in the service pages of

our Gigaset online portal: http://www.gigaset.com

Product may not be fully compatible with the national telephone network. It is clearly

specified on the box near the CE mark as well as on the bottom of the base station for which

country/countries the equipment has been developed. If the equipment is used in a manner

inconsistent with this advice or with the instructions of the manual and on the product itself,

this may have implications on the conditions for warranty or guarantee claims (repair or

exchange of product).

In order to make use of the warranty, the product purchaser is asked to submit a receipt

which proves the date of purchase (date from which the warranty period starts) and the type

of goods that have been purchased.

If you have problems setting up or operation this product please call

GIGASET UK HELPLINE +44 84503 18190

GIGASET IRL HELPLINE +353 818 200 033

Preparing the handset

¤ Insert the rubber

seal for the USB

plug socket into

the groove.

Charging the battery

¤ Insert the batteries with the polarity in

the correct direction.

The polarity is indicated in the battery

compartment.

¤ Insert the battery cover from

above.

¤ Then press the cover until it clicks

into place.

To reopen the battery cover to replace the

battery:

¤ Insert your fingernail into the notch on

the top of the cover and push

downwards.

The battery is supplied with a partial charge. Please

charge it completely before use.

¤ Charge the handset in the base for 9.5 hours.

Please note

The handset must only be placed in the

designated base or charger.

9.5 h

Setting up the base and handset

The installation wizard starts automatically the first time your handset is connected to the

base after switching on or after registration. It helps you to configure the following key

settings on the handset and base.

If you want to adjust the settings at a later date:

¤ Touch the option at the bottom of the Skip Settings

display.

The handset then switches to idle status.

You can configure the settings at any time using the Settings

menu on your handset.



To configure the settings:

¤ Touch the Time field to configure this setting.

The Date and Time submenu opens.

Set the

– Time

– Time Format (12 hrs/24 hrs)

– Date

– Date Order (Day Month Year/Month Day Year)

by touching the fields in sequence and adjusting the settings

(see the following illustrations).

Setting the time

The current position is shown in colour and the digit flashes.

¤ Enter the digits via the keypad. You can change the cursor

position by touching the digit you want to change.

¤ Touch the icon to save your changes or press Þ ‘ to

return to the Date and Time page without saving any

changes.

Setting the time format

The time format setting is indicated by ´.

¤ Touch the Picon to change the format.

¤ Touch the ‘ icon. The setting is saved automatically. You

return to the Date and Time page.

Welcome

Time

00:00

Date

01.04.2012

Display Language

Deutsch

AM Phrase Language

(not configured)

Skip

Settings

Save

Settings

Date and Time

Time

00:00

Time Format

24 hrs

Date

01.04.2012

Date Order

Day Month Year

Skip

Settings

Save

Settings

Time

1 5 : 3 0

Time Format

12 hrs ±

24 hrs ²

Setting up the base and handset

Setting the date

The current position is shown in colour and the digit

flashes.

¤ Enter the digits via the keypad. You can change the

cursor position by touching the digit you want to

change.

¤ Touch the icon to save your changes or press Þ ‘ to

return to the Date and Time page without saving any

changes.

Setting the date order

The date order setting is indicated by ´.

¤ Touch the Picon to change the format.

¤ Touch the ‘ icon. The setting is saved automatically.

You return to the Date and Time page.

¤ Touch Save to return to the Welcome page.

Setting the display language

The current language is displayed under Display

Language.

If you want to change the setting:

¤ Touch the field.Display Language

The current language setting is indicated by ´.

¤ Touch the P icon next to the language you want to set.

If your language is not displayed, the list may be "longer"

than the display. You must then scroll through the list. To do

this, put a finger on the display and move it slowly upwards.

¤ Touch the ‘ icon. The setting is saved automatically.

You return to the Welcome page.

Setting the answering machine language

¤ Touch the field.AM Phrase Language

¤ Set the answering machine language as described

above.

Setting the country

Set the country in which you are going to use the phone.

¤ Touch the Country field.

¤ Set the country as described above.

Entering the local area code

¤ Touch the Area (Dial Code) field.

Edit

Date

0 1 . 0 1 . 2 0 1 2

Date Order

Day Month Year ±

Month Day Year ²

Display Language

Deutsch

AM Ph L

Deutsch ²

English ±

Français ±

Welcome

Display Language

Deutsch

AM Phrase Language

Deutsch

Country

Germany

Area (Dial Code)

(not configured)

Skip

Settings

Save

Settings

Setting up the base and handset

Handset in idle status (configurable page)

Once you have configured all the necessary settings, your handset switches to idle status.

The configurable page that you can customise is displayed. Here, you can compile

important functions for quick access. Some are set by default.

Your phone is now ready for use.

The Local Prefix is the country-specific area code that

precedes the Local Area Code when the country code is

not dialled. In Germany, the "0" Local Area Code is then e.g.,

89 for Munich or 221 for Cologne.

¤ Enter the Local Prefix of your country (max. 4 characters;

"0" in the example). The field is already populated for the

selected country.

¤ Briefly touch the second input field and enter the Local

Area Code (maximum 8 characters, "89" in the example).

You can correct incorrect entries using $.

¤ Touch after entering the numbers to save the entry. Þ

The Welcome page is displayed again.

¤ Touch the Save option to save your settings.

Area (Dial Code)

Local Prefix

Local Area Code

L ¿

Area (Dial Code)

089

Skip

Settings

Save

Settings

Status bar

Contains the internal handset name (e.g., ; if multiple handsets INT 1

are registered) and icons that display the current settings and the

operating status of the phone. To discover the meaning of the icons,

see user manual.

Touch the status bar to display the status page.

Current date

Time

Open call lists

Open Contacts

Ã Û ò ô ó £

Apr

Thu

Congratulations

By purchasing a Gigaset, you have chosen a brand that is

fully committed to sustainability.

This product’s packaging is eco-friendly!

To learn more, visit www.gigaset.com.

S820A

Produkt Specifikationer

Mærke:	Gigaset
Kategori:	Telefon
Model:	S820
Type:	DECT telefon
Brugervejledning:	Ja
Produktfarve:	Sort
Batterikapacitet:	1300 mAh
Indbygget skærm:	Ja
Skærm diagonal:	2.4 "
Skærmopløsning:	240 x 320 pixel
Berøringsskærm:	Ja
Tekstbeskeder (SMS):	Ja
Batteriteknologi:	Nikkel-Metalhydrid (NiMH)
Skærm:	TFT
Taletid:	20 t
Standby tid:	250 t
Højttalertelefon:	Ja
Genopkaldsliste kapacitet:	20
Antal melodier:	20
Telefonsvarer:	Ingen
Kapacitet for telefonbog:	500 entries
Nummervisning:	Ja
Knapper med baggrundsbelysning:	Ja
Monteringstype:	Bord/Væg
Baggrundsfarve:	Hvid
Batteritype:	AA
Maksimal indendørs rækkevidde:	50 m
Maksimal udendørsinterval:	300 m
Typer af ringetoner:	Polyfonisk
Vækkeur:	Ja
Mulighed for flere håndsæt:	6
Opkaldstimer:	Ja
Baggrundsbelysning:	Ja
Trådløs forbindelse:	Ja
Håndsæt dimensioner (BxDxH):	154 x 54 x 29 mm
Antal understøttede batterier:	2
Ur med kalender:	Ja
Basisdimensioner:	116 x 96 x 63 mm
Vis antal farver:	65.536 farver
VIP-gruppefunktion:	Ja
Vis nummer (CLIP):	Ja
Navigeringstast:	Ingen
Plug and play:	Ja
Basestation:	Ja
Oplader:	Ja
Vibrationsalarm:	Ingen
Indikator for batteriopladning:	Ja
Ringetoner der kan downloades:	Ja
Antal SMS-bokse:	1