Gioteck VX-1 Manual

Gioteck Joystick VX-1

Læs gratis den danske manual til Gioteck VX-1 (2 sider) i kategorien Joystick. Denne vejledning er vurderet som hjælpsom af 74 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 37.5 anmeldelser. Har du et spørgsmål om Gioteck VX-1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

45 6

VX-1 QUICK SETUP

1. Connect the VX-1 to your console via its charging lead.

2. Insert the usb dongle into a usb port on the console.

3. The LED on the dongle will ﬂash quickly (slow ﬂashing is

receiving mode not pairing mode).

4. Immediately press the home button on your controller.

5. All the LEDs on the controller will ﬂash, and aer a short

time one (or two) will remain solid.

6. Immediately disconnect the charging lead from the

controller and the LEDs will ﬂash again.

7. Repeat steps 4 & 5. (Sometimes pushing the home button

again will speed up this process. If the controller fails

to respond, repeat the process but make sure that you

disconnect the dongle and reinsert.)

8. To add multiple controllers (up to 7) or assign your

controller to a dierent port go to:

Accessory settings > Reassign controller.

Produkt Specifikationer

Mærke:	Gioteck
Kategori:	Joystick
Model:	VX-1
Vægt:	- g
Produktfarve:	Sort
Forbindelsesteknologi:	Ledningsført
Enhedstype:	Gamepad
Funktionstaster til spilkontrol:	Select button, Start button
Understøttede gaming platforme:	PC, Playstation 3