Gorenje ECT 680 Manual

Gorenje Ovn ECT 680

Læs gratis den danske manual til Gorenje ECT 680 (13 sider) i kategorien Ovn. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Gorenje ECT 680, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/13
Instructions for use, mounting and connection
16
Built-in ceramic-glass cooktop GB IE MT
Dear customer !
The built-in ceramic-glass cooktop is intended for household
use only.
Materials used for packaging are nature friendly and may be
recycled, deposited or destroyed without any threats to the
environment.
In order to recognize these features, all packing materials are
marked with relevant symbols.
Once your appliance has become obsolete and you do not
intend to use it any longer, take adequate care not to litter the
environment. Deposit your old appliance with the authorized
depot dealing with used household appliances.
Instructions for use
Instructions for use have been prepared for the user, and
describe the particulars and handling of the appliance. These
instructions apply to different models from the same family of
appliances, therefore you may find information and
descriptions that may not apply to your particular appliance.
Installation instructions
The appliance should be connected to the power supply in
accordance with the instructions from the chapter "Electrical
connections" and in line with the standing regulations and
standards.
The connections should be carried out by a qualified personnel
only.
Rating plate
The rating plate with basic information is located underneath
the appliance.
Fire hazard protection
Appliances are allowed to be mounted on one side next to a
high kitchen cabinet, the height of which may exceed that of
the appliance. On the opposite side however, only a kitchen
cabinet of equal height as the appliance is allowed.
Important warnings...................................................... 16
Connection to the power 17supply ..................................
Basic adjustment of sensors to the ambience
Installation diagram
Mounting the built-in 18cooktop.....................................
Caution !
Dimensions of the built-in hob opening
Installation procedure
Ceramic-glass cooktop ................................................. 19
Cookware ...................................................................... 19
Energy saving tips
Glass ceramic hob control 20elements ............................
Control panel
Control elements
Automatic cooking mode
Blocking the hob operation
Timer function
Limited time of operation
Safety functions and error display
Cooker controls .............................................................24
Control panel
Control elements ...........................................................25
Switching the hob on
Selecting the particular hotplate
Switching the hotplate on
Automatic cooking mode
Blocking the hob operation
Remaining heat indicators
Switching the entire hob off
Limited operation time
Power interruption
Safety warnings and error indication
Cleaning and maintenance of ceramic-glass hob........27
Technical information...................................................28
Important warnings
• The appliance may be built-in and connected to the power
supply only by a qualified technician.
• Particular areas of the cooktop surface (adjacent to the
hotplates) are hot during operation. Prevent the children to
hang around the appliance and warn them properly against
the danger of burns.
• Hot oil ignites readily, so be sure have the preparation of
such food (fries) under constant control.
• Hotplates may not be left in operation empty, without any
dishes on top.
• Never use the appliance for heating the ambience.
• Never use the ceramic-glass cooktop as a working surface.
Sharp objects may damage the cooktop surface.
• Preparation of food in aluminum or plastic cookware is not
allowed. Never place any plastic objects or aluminum foil
upon the cooktop surface.
• In case any other appliances are plugged in the electric
mains close to the cooktop, prevent the contact of the plug
cable with the hot cooking zones.
• Never keep any flammable or temperature sensitive objects,
like cleaning agents, sprays, detergents, etc., below the
appliance.
• Never use cracked or broken ceramic-glass cooktop. In case
you notice any visible cracks on the surface, cut the power
supply immediately.
• In case of any malfunctions, disconnect the appliance from
the power supply and call service department.
• Do not use high-pressure steam cleaner or hot steam to
clean the appliance.
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment and
human health, which could otherwise be caused by
inappropriate waste handling of thisproduct. For more
detailed information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you purchased the
product.
Instructions for use, mounting and connection 17
Connection to the power supply
• Connections may be carried out by a qualified technician only.
The earthing protection must comply with the standing
regulations.
• Connection terminals are revealed when the connection box
cover is removed.
• Prior any attempted connection check that the voltage indicated
on the rating plate is in line with your home power supply.
• The rating plate is located underneath the appliance.
• The appliance is manufactured for use with the power supply
voltage AC 230 V.
• The electric wiring should be equipped with a circuit breaker able
to isolate the appliance from the mains in all points, with the
distance between terminals of at least 3 mm in open position.
This may be done by means of fuses, safety switches, etc.
• The connection should be selected in accordance with the
declared charge capacity of the mains and the fuse power.
• Such appliances are allowed to be mounted on one side next to
a high kitchen cabinet, the height of which may exceed that of
the appliance. On the opposite side however, only a kitchen
cabinet of equal height as the appliance is allowed.
• Upon the completion of installation, live wires and isolated cables
must be adequately protected against accidental touching.
• Distance between the cooktop surface and the cooking hood
must be such as indicated in the instructions for use of the hood.
• Kitchen cabinets may not be mounted underneath the built-in
ceramic-glass cooktop.
Basic adjustment of sensors to the ambience
Upon each connection to the power supply the sensors of the
appliance are automatically adjusted to the environment to
ensure their proper function. All displays indicate the sign "-".
Once the successful adjustment is completed it is signaled with
a beep, all displays are switched off and your cooktop is ready
for use.
During the adjustment procedure the sensors must be free of
any objects, otherwise the adjustment procedure will be
interrupted until such objects are removed from the sensor
surface. During this period the regulation of the cooktop is
impossible.
ATTENTION !
Before attempting any repairs on the appliance, disconnect the
power supply. In accordance with the mains voltage the
appliance should be connected in line with the attached
diagram. The earthing wire (PE) must be connected to the
terminal marked with the earthing symbol .
The connection cable must lead through the relief safety
device, protecting it from accidental pulling out.
Upon the completion of installation switch all the hotplates on
for about 3 minutes to check the proper functioning.
Installation diagram
NOTE
In some connection boxes the connector bridges are placed between contacts 4 and 5, and in the others they are stored at a
designated place within the box. These boxes have the connection screws already in open position so they need not be unscrewed.
Connection may be carried out by means of:
− rubber coated connection cables, model H05 RR-F 4x1,5 with yellow-green earthing cable;
− PVC insulated connection cables, model H05 VV-F 4x1,5 with yellow-green earthing cable; or
− any other suitable cables.

Produkt Specifikationer

Mærke: Gorenje
Kategori: Ovn
Model: ECT 680

Har du brug for hjælp?

Hvis du har brug for hjælp til Gorenje ECT 680 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ovn Gorenje Manualer

Gorenje

Gorenje BO635E11WUK Manual

12 Januar 2025
Gorenje

Gorenje BCMS598S19X Manual

12 Januar 2025
Gorenje

Gorenje GI3201BC Manual

12 Januar 2025
Gorenje

Gorenje GI6401BC Manual

12 Januar 2025
Gorenje

Gorenje GI8421BSC Manual

12 Januar 2025
Gorenje

Gorenje GI6421BSC Manual

12 Januar 2025
Gorenje

Gorenje BPS6737E02B Manual

11 Januar 2025
Gorenje

Gorenje BPSA6747A08BGWI Manual

11 Januar 2025
Gorenje

Gorenje BSA6747A04BGWI Manual

11 Januar 2025
Gorenje

Gorenje BSA6138B Manual

9 Januar 2025

Ovn Manualer

Nyeste Ovn Manualer

AEG

AEG TP9SB83XAB Manual

15 Juni 2025
AEG

AEG NBP8S731AB Manual

15 Juni 2025
Galaxy

Galaxy COE3Q Manual

15 Juni 2025
Cres Cor

Cres Cor RO151HUA9DE Manual

15 Juni 2025
Alto-Shaam

Alto-Shaam 750-SK Manual

14 Juni 2025
Cres Cor

Cres Cor RO151FUA18DEZ Manual

14 Juni 2025
Alto-Shaam

Alto-Shaam 1750-SK Manual

14 Juni 2025
TurboChef

TurboChef HHC 2620 Manual

14 Juni 2025
Tandoor Morni

Tandoor Morni CS-01 Manual

14 Juni 2025
Alto-Shaam

Alto-Shaam 1200-SK Manual

14 Juni 2025