Gorenje R 1216BAB Manual

Gorenje Køleskab R 1216BAB

Læs gratis den danske manual til Gorenje R 1216BAB (6 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Gorenje R 1216BAB, eller vil du spørge andre brugere om produktet?

Side 1/6
Instructions for Use 9
Refrigerator EN
Thank you for your trust and for buying this appliance. We hope it will successfully serve the purpose for
many years.
Refrigerator is for domestic use only and is used for storing
fresh foods at the temperature of 0°C and higher.
Low temperature compartment is used for storing frozen foods
(storing time depends on kind of food, thermostat setting and
marking on the low temperature compartment door).
Before Putting Into Use.................................................. 9
We Care for the Environment
Tips for Energy Savings
Important ........................................................................ 9
Disposing of the Worn Out Appliance
Placing and Installation ............................................... 10
Choosing the Right Place
Location
Description of the Appliance ....................................... 11
Refrigerator (A)
Low Temperature Compartment (B)
Operation Control ........................................................ 11
Temperature Selection
Use ..................................................................................12
Storing Fresh Foods
Storing Frozen Foods
Defrosting Frozen Food
Ice Making
Maintenance and Cleaning...........................................13
Automatic Defrosting of the Refrigerator
Manual Defrosting of the Low Temperature Compartment
Cleaning the Appliance
Switch Off the Appliance When Not In Use
Trouble-Shooting Guide ...............................................14
Before Putting Into Use
Before connecting the appliance to the mains supply, place it
on the location where it will later on be installed and leave it
for about 2
hours, which will reduce a possibility of malfunctions in the
cooling system due to transport handling.
Clean the appliance, and be thorough, especially in the
interior (See Cleaning and Maintenance).
In case the interior accessories are not correctly placed,
rearrange them as described in chapter Description of the
Appliance.
Instructions for Use
These instructions for use are intended for the user. They
describe the appliance and its correct and safe use. They were
prepared for various types of refrigerators therefore you might
find in it some functions that do not apply to your appliance and
description of the accesories that your appliance does not
include.
We Care for the Environment
Our products use environmentally friendly packaging, which
can be either recycled or disposed of in an environmentally
friendly manner. To this end, individual packaging materials
are clearly marked.
These instructions are printed either on recycled paper or
chlorine free bleached paper.
When your appliance finally wears out, please try not to
burden the environment with it; call your nearest authorised
service agent. (See Disposing of the Worn Out Appliance)
Tips for Energy Savings
Try not to open the door too often, especially when the
weather is wet and hot. Once you open the door, mind to
close it as soon as possible. This is especially important if
you have an upright model.
Every now and then check if the appliance is sufficiently
ventilated (adequate air circulation behind the appliance).
Use higher thermostat settings only when required or
recommended.
Before loading the appliance with packages of fresh foods,
make sure they are cooled to ambient temperature.
Ice and frost layer increase energy consumption, so do
clean the appliance as soon as the layer is 3-5 mm thick.
If the gasket is damaged or if it turns out that the sealing is
poor, the energy consumption is substantially higher. To
restore efficiency, replace the gasket.
The condenser on the rear wall should be always clean, free
of dust or any impurities.
Always consider instructions stated in sections Positioning
and Energy Saving Tips, otherwise the energy consumption
is substantially higher.
Important
If you have bought this appliance to replace an old one
equipped with a lock that cannot be opened from inside
(lock, bolt), make sure that
the lock is broken. This will make it impossible for children to
lock themselves inside the appliance and suffocate.
The appliance must be correctly connected to the mains
supply. (see: Connecting to the Mains Supply).
Do not touch the cooled surfaces while the appliance
operates, especially not with wet hands, because the skin
may stick to the cold surfaces.
Instructions for Use
10
Do not freeze bottles containing liquid, especially not soft
drinks, such as mineral water, sparkling wine, beer, cola
etc., because liquid expands during freezing and the glass
bottle is very likely to blow up.
Do not eat frozen food (bread, fruit, vegetables),
because you can get frostbites.
If the food has strange smell or color, throw it away, because
it is very likely that it is spoiled and therefore dangerous to
eat.
Disconnect the appliance from the power supply before
repairing it (only a qualified technician should repair it),
before cleaning and before replacing the light bulb.
Do not defrost the appliance with other electric devices (hair
dryer etc.) and never scrape the ice or frost layer with sharp
tools. Use only enclosed tools or tools recommended by the
manufacturer.
For the sake of environment protection - be careful not to
damage the rear wall of the appliance (the condenser unit or
the tubes - for example when moving the appliance) or any
part of the refrigerating system inside the appliance.
The refrigerating system of the appliance is filled with
refrigerant and oil, so when the appliance is damaged,
handle it with care and dispose it of in compliance with
environmental protecting precautions. (See We Care for the
Environment).
If the supply cord is damaged, it must be replaced by the
manufacturer or his service agent or a qualified person in
order to avoid hazard.
The rating plate is inside the appliance or outside on the rear
wall.
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the recycling
of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment and
human health, which could otherwise be caused by
inappropriate waste handling of thisproduct. For more
detailed information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you purchased the
product.
Disposing of the Worn Out Appliance
When your appliance finally wears out, dispose it of. If the
appliance has a lock, break it, in order to prevent eventual
accidents (danger of children get locked inside the
appliance).
The refrigerating system of the appliance is filled with
refrigerant and insulating substances which should be
separately treated and processed. Call your nearest
authorised service agent or specialised servicing centre. If
you don't find one, contact your local authorities or your
distributor. Be careful not to damage the tubes on the rear
wall of the appliance (danger of pollution).
Placing and Installation
Choosing the Right Place
Place the appliance in a dry and regularly ventilated room.
Allowed ambient temperature depends on the model (class) of
the appliance and is stated on the rating plate of the appliance.
Never place the appliance near heat emitting devices (e.g.
cooker, radiator, water heater or similar devices) and do not
expose it to direct sunlight. The appliance should be positioned
at least 3 cm away from the electric or gas cooker and at least
30 cm away from the oil or coal stove. If this is not possible,
use an appropriate insulation.
Behind the appliance there should be free space at least 200
cm² wide and above the appliance the high kitchen units
should be at least 5 cm away from the appliance in order to
assure adequate ventilation of the condenser unit.
Class Ambient temparature
SN (sub-normal) from + 10°C to + 32°C
N (normal) from + 16°C to + 32°C
ST (sub-tropical) from + 18°C to + 38°C
T (tropical) from + 18°C to + 43°C
Location
Place the appliance horizontally and firmly on a solid base.
Level the appliance with two adjustable feet located on the
front of the appliance.
Two spacers attached to the ppliance must be fitted onto the
upper edge of the condenser, thus preventing the appliance
from being installed too close to the wall. Spacers are
manufactured for all-purpose function depending on the
distance of the condenser from the wall. Therefore turn
spacers correspondingly and fix them to the appliance.
The appliance with ventilation grid may be placed close to
the wall. The grid enables sufficient air circulation, required
for adequate ventilation of the rear wall.
Connection to Power Supply
Connect the appliance with the cable and plug to the power
supply socket outlet with a ground terminal (safety socket).
Required nominal voltage and frequency are indicated on the
rating plate.
The connection to the mains supply and earthing have to be
made according to current standards and regulations. The
appliance resists temporary voltage tolerance up to -15 to +10
%.


Produkt Specifikationer

Mærke: Gorenje
Kategori: Køleskab
Model: R 1216BAB

Har du brug for hjælp?

Hvis du har brug for hjælp til Gorenje R 1216BAB stil et spørgsmål nedenfor, og andre brugere vil svare dig