Gossen Metrawatt PMA16 Manual

Gossen Metrawatt Multimeter PMA16

Læs gratis den danske manual til Gossen Metrawatt PMA16 (1 sider) i kategorien Multimeter. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Gossen Metrawatt PMA16, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Operating Instructions

PMA 16

Power Measuring Adapter

3-349-030-02

6/12.22

Printed in Germany • Subject to change without notice /

Errors excepted • A PDF version is available on the Internet.

Gossen Metrawatt GmbH

Südwestpark 15

90449 Nürnberg • Germany

Phone +49 911 8602-0

Fax +49 911 8602-669

E-Mail info@gossenmetrawatt.com

www.gossenmetrawatt.com

Applications

The PMA 16 power measuring adapter is inserted between

the electrical outlet and the mains plug for safe and conve-

nient measurement of power consumption at single phase

devices under test. The protective conductor of the device

under test remains fully functional.

Safety Precautions

The power measuring adapter is a measuring instrument

accessory in accordance with IEC 61010–1 /

DIN EN 61010–1 / VDE 0411–1, and may only be used for

its intended purpose.

It may only be used in power systems with nominal voltages of up

to 250 V which are fused at a maximum of 16 A!

Instructions for Use

You will need a power meter which is equipped with con-

nector jacks into which the contact-protected plugs at the

permanently attached measurement cables of the PMA 16

can be plugged. For power measurement we recommend

the METRAHIT ENERGY

digital multimeter from Gossen

Metrawatt GmbH.

The following sequence must be observed when connecting

the power measuring adapter to the device under test and

the mains:

➭Connect the measurement cables from the power mea-

suring adapter to the bonding jack ( : black), the volt-

age input (V: blue) and the current input (A: red) at the

measuring instrument and select the highest possible

power measuring range or Auto Range.

➭Insert the power measuring adapter into the electrical outlet.

➭Insert the mains plug from the device under test into the

outlet at the power measuring adapter.

➭Switch the device under test on and read the measure-

ment value from the display at the measuring instru-

ment. Select a lower measuring range if necessary, in

order to obtain highest possible resolution.

➭Follow this procedure in reverse in order to disconnect

the power measuring adapter.

COM

Temp



mA A

Load

PMA 16

redblackblue

V A

Produkt Specifikationer

Mærke:	Gossen Metrawatt
Kategori:	Multimeter
Model:	PMA16

Har du brug for hjælp?

Hvis du har brug for hjælp til Gossen Metrawatt PMA16 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Multimeter Gossen Metrawatt Manualer

Gossen Metrawatt SECULIFE HIT AM Manual

26 September 2025

Gossen Metrawatt METRAHIT IM E-DRIVE BT Manual

26 September 2025

Gossen Metrawatt PMA16 Manual

1 September 2024

Gossen Metrawatt Coil Adapter 50mH Manual

30 August 2024

Gossen Metrawatt METRACLIP 88 Manual

30 August 2024

Gossen Metrawatt MetraClip 85 Manual

30 August 2024

Gossen Metrawatt METRACLIP 87 Manual

30 August 2024

Gossen Metrawatt METRACLIP EARTH Manual

30 August 2024

Gossen Metrawatt METRACLIP 86 Manual

30 August 2024

Gossen Metrawatt CP 30 Manual

30 August 2024

Multimeter Manualer

Nyeste Multimeter Manualer

Weidmüller Multimeter 125S Manual

7 Oktober 2025

Weidmüller VT Digi Pro Manual

7 Oktober 2025

Metra Install Bay 3320 Manual

5 Oktober 2025

HT Instruments Ironmeter Manual

3 Oktober 2025

Draper Expert 41834 Manual

1 Oktober 2025

Draper Expert 30629 Manual

1 Oktober 2025

23 September 2025

23 September 2025

23 September 2025

21 September 2025