Gossen Metrawatt SECULIFE ST HV Manual

Gossen Metrawatt Måleinstrumenter SECULIFE ST HV

Læs gratis den danske manual til Gossen Metrawatt SECULIFE ST HV (72 sider) i kategorien Måleinstrumenter. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Gossen Metrawatt SECULIFE ST HV, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/72

SECULIFE⏐ST and SECULIFE⏐ST HV

Test Instruments for Portable Appliance Testing according to Health and Safety Policy

and in Accordance with the Medical Product Law as well as for Routine Testing

3-349-448-03

21/7.15

Operating Instructions

2GMC-I Messtechnik GmbH

PROBE 54

SONDE

Auto

Function

Test

VAux Setup

Iso /

I leakage

BDFHK

AC E G I

Applied Parts

45678910

14 15 1816 17

Probe connection

Insert the double plug of the probe into sockets 4 and

5 such that the plug with the white ring contacts

socket 5 (vertical bar).

Note: Contact problems with exposed conductive parts

when using the standard probe with test tip

In order to assure good contact, surface coatings must be

removed from devices under test with special tools at a suit-

able location so that the surface has a metallic shine. The tip

of the test probe is not suitable for scratching away paint, be-

cause this may impair its coating and/or mechanical

strength. The brush probe (Z745G) may be more suitable

than the test probe in certain individual cases.

Measurements at jacks 1 – 2 – 3

Always start with the measurement before contacting

the measuring point. Between jacks 1 and 2, a maxi-

mum of 10 V may be applied. Between jacks 2 and 3,

up to 253 V may be applied.

Attention: Jacks (2) and (3) are short-circuited

during all measurements at the test socket!

(Exception: see chapter 12.2)

Standard equipment

Test instrument with 10 + 2 connectors for application parts

1 Probe cable with test probe

1 Clip-on alligator clip for test probes

3 Clip-on quick-clamp terminals

10 conductor patient connection cable 2 mm

10 Clip-on alligator clip 2 mm

1 Calibration certificate per DAkkS

1 Operating instructions

1Carrying strap

Up-to-date PC software (free start-up programs or

demo software for data management, report and list

generation) is available on our website for download.

These operating instructions describe an

instrument with firmware version 7.35.

RS232

IOIOI

max. 10 V

max. 253 V

Produkt Specifikationer

Mærke:	Gossen Metrawatt
Kategori:	Måleinstrumenter
Model:	SECULIFE ST HV

Har du brug for hjælp?

Hvis du har brug for hjælp til Gossen Metrawatt SECULIFE ST HV stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måleinstrumenter Gossen Metrawatt Manualer

Gossen Metrawatt SECUSTAR FM plus Manual

24 August 2024

Gossen Metrawatt METRATESTER 4 Manual

24 August 2024

Gossen Metrawatt METRATESTER 5 Manual

24 August 2024

Gossen Metrawatt SECULIFE IT Manual

24 August 2024

Gossen Metrawatt METRAHIT T-COM Manual

24 August 2024

Gossen Metrawatt METRAHIT 18S Manual

24 August 2024

Gossen Metrawatt METRISO PRIME Manual

24 August 2024

Gossen Metrawatt SECUTEST 0701 Manual

24 August 2024

Gossen Metrawatt SECULIFE ST HV Manual

24 August 2024

Gossen Metrawatt SECULIFE HIT Manual

23 August 2024

Måleinstrumenter Manualer

Nyeste Måleinstrumenter Manualer

Brandson 303240 Manual

11 Januar 2025

BENNING DB 2 Manual

11 Januar 2025

Bresser 40-25830 Rangefinder Manual

17 September 2024

Laserliner AutoLite-Laser Green Manual

17 September 2024

Vonroc MM501DC Manual

29 August 2024

Voltcraft VC840 Manual

26 August 2024

Voltcraft VC-12A Manual

26 August 2024

Voltcraft 122953 - Colour Analysis Manual

26 August 2024

Voltcraft VC960 Manual

26 August 2024

Voltcraft VC-531 stroomtang Manual

26 August 2024