Grässlin telt 100 Manual

Grässlin Ikke kategoriseret telt 100

Læs gratis den danske manual til Grässlin telt 100 (18 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Grässlin telt 100, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/18
1 / 2
telt 100
40.02.0001.1
Made in the EU
2
3
1
4
5
6
N
L
L
N
16
18
N
L
L
N
16
18
Leopoldstr. 1
78112 St. Georgen / Germany
www.graesslin.de
Emergency light tester
Characteristics
Description
Connection
EN
Technical parameters
• Time relay for automatic testing of emergency lighting.
• Panel button for starting the test.
• Comfortable and well-arranged time delay (t) setting by rotary switch.
• Adjustable time delay 10 m – 30 m – 60 m – 90 m – 120 m – 180 m is divided into
six ranges.
• ZERO CROSS feature: closes and opens the output contact when the voltage
crosses zero.
• Multifunction red LED  ashes or shines depending on the operating states.
1. Supply voltage terminals (N-L)
2. Supply voltage indication
3. Indication of operating states
4. Time delay (t) setting
5. Test button
6. Output contact (16-18)
Direct emergency lighting
connection (for I<16A)
Emergency lighting connection
through contactor (for I>16A)
Power supply
Supply terminals:
Supply voltage:
Consumption (max.):
Supply voltage tolerance:
Time circuit
Number of functions:
Time delay (t):
Time setting:
Time deviation:
Repeat accuracy:
Temperature coe cient:
Output
Contact type:
Current rating:
Breaking capacity:
Inrush current:
Switching voltage:
Power dissipation (max.):
Mechanical life:
Electrical life (AC1):
Other information
Operating temperature:
Storage temperature:
Operating position:
Mounting:
Protection degree:
Overvoltage category:
Pollution degree:
Cross-wire section – solid/
stranded with ferrule (mm
2
):
Dimensions:
Weight:
Standards:
L-N
AC 230 V (50-60 Hz)
3.9 VA/1.9 W
–15 %; +10 %
1
10 m – 30 m – 60 m – 90 m – 120 m – 180 m
rotary switch
5 % – mechanical setting
0.2 % – set value stability
0.01 %/°C, at = 20 °C (0.01%/°F, at = 68 °F)
1× changeover (AgSnO
2
); changes the potential "L"
16 A/AC1; 1 HP|240 Vac, 1/2HP|120 Vac; PD. B300
4000 VA/AC1, 384 W/DC1
80 A/20 ms (NO contact)
250 V AC/24 V DC
1.2 W
10.000.000 ops.
20.000 ops.
–20 .. +40 °C
–30 .. +70 °C
any
DIN rail EN 60715
IP40 front panel / IP20 terminals
III.
2
max. 1× 2.5, 2× 1.5/
max. 1× 2.5 (AWG 14)
90 × 17.6 × 64 mm
53 g
EN 61812-1
2 / 2
Un
LED
LED
Un
t
>2s
TEST
t
L-18
L-16
Function
If the supply voltage is connected, the green LED Un lights up and at the same time
the red LED indicates that the idle output contact "16" is closed. Pressing the TEST
button on the device panel closes the output contact "18" and disconnects the pha-
se wire "L" from the tested emergency lights.
After the set time delay (t) has elapsed, output contact "18" opens and emergency
lighting is connected through contact "16". During the delay, the red LED  ashes
slowly.
Repeated short pressing of the TEST button does not a ect the length of the delay.
A long press of the TEST button (>2 s) ends the delay. While pressing the button, the
red LED  ashes quickly.
Warning
Device is constructed for connection in 1-phase network AC 230 V and must be installed
according to norms valid in the state of application. Connection according to the details
in this direction. Installation, connection, setting and servicing should be installed by
quali ed electrician sta only, who has learnt these instruction and functions of the
device. This device contains protection against overvoltage peaks and disturbancies
in supply. For correct function of the protection of this device there must be suitable
protections of higher degree (A, B, C) installed in front of them. According to standards
elimination of disturbancies must be ensured. Before installation the main switch must
be in position “OFF” and the device should be de-energized. Don´t install the device to
sources of excessive electro-magnetic interference. By correct installation ensure ideal
air circulation so in case of permanent operation and higher ambient temperature the
maximal operating temperature of the device is not exceeded. For installation and
setting use screw-driver cca 2 mm. The device is fully-electronic - installation should be
carried out according to this fact. Non-problematic function depends also on the way of
transportation, storing and handling. In case of any signs of destruction, deformation,
non-function or missing part, don´t install and claim at your seller it is possible to
dismount the device after its lifetime, recycle, or store in protective dump.

Produkt Specifikationer

Mærke: Grässlin
Kategori: Ikke kategoriseret
Model: telt 100

Har du brug for hjælp?

Hvis du har brug for hjælp til Grässlin telt 100 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Grässlin Manualer

Grässlin

Grässlin telt 100 Manual

2 Februar 2025
Grässlin

Grässlin tako MF 200 Manual

3 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman

Navman MiVue 540 Manual

2 August 2025
Pro User

Pro User PSI2000TX Manual

2 August 2025
Guede

Guede 5T Manual

2 August 2025
Navman

Navman EZY40 Manual

2 August 2025
Thule

Thule Chariot Ski kit Manual

2 August 2025
Hozelock

Hozelock 5102 Manual

2 August 2025
ART

ART 310 Manual

2 August 2025
Gorenje

Gorenje KAS53ZDCINVFT Manual

2 August 2025
Gorenje

Gorenje KAS35ZDCINVFT Manual

2 August 2025
Navman

Navman MY450LMT Manual

2 August 2025