GVM GT-80-40Y Manual

GVM Ikke kategoriseret GT-80-40Y

Læs gratis den danske manual til GVM GT-80-40Y (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om GVM GT-80-40Y, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

GT-80-40Y

MOTORIZED SLIDER

Add: 338 N Canal St, #20, South San Francisco,CA94080, USA

Web: www.gvmled.com

Email: support@gvmled.com

Step3：Mount slider on the tripod.The screws hole(1/4 and

3/8)on the bottom of plate can directly matched with the

screws on the tripod.

Step2:According to camera instrument’s located hole’s size to

select the camera base to connect screws,and then tighten.

Loosen the camera base lock piece,photograph can be perfect, as

shown in the exhibit.

Install step：

Step1:From portable bags take the track component and the two

supporting feet component out.Aim screw of support legs to the

screw hole slider both sides and then to lock and tighten the

screw down from above.

Four: The slider with wheels.Rapid transformation with the

Product Detail

1.Supporting feet

2.Wheel

3.Bubble level

4.1/4 or 3/8 screw

5.Brake

6.1/4 or 3/8 screw

block and track function Move the knob to change the model.

between block and track

conwenient to use.Using precision thread to adjust foot brace

up and down,it can make slider more level,to achieve a higher

quality.

Three：It is humanized design and suitable for various,especially

Two：Camera base and slider reserve all kinds of holes,can

be arbitrary collocation with a variety of photographic equipment.

Introduction：

Moving slider is a collection of camera track and handle push

function Can be used on the ground table or tripods to makes. ,

Low Angle shot and tight shot Rapid transformation with the.

block and track function Move the knob to change the model.

between block and track also you can adjust the levelness with,

the knob too With high quality bearing make it moves smoothly. ,

and quietly.

The characteristics:

One

：It has four bearings and perfect mechanics principle,can

carry more and Slide smoo ther.

Produkt Specifikationer

Mærke:	GVM
Kategori:	Ikke kategoriseret
Model:	GT-80-40Y

Har du brug for hjælp?

Hvis du har brug for hjælp til GVM GT-80-40Y stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret GVM Manualer

6 November 2025

5 November 2025

15 November 2024

7 Oktober 2024

4 Oktober 2024

3 September 2024

6 August 2024

5 August 2024

5 August 2024

4 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

IOptron iEFW-18 Manual

15 December 2025

Magliner CooLift CTA48 Manual

15 December 2025

Epson GP-M831 Manual

15 December 2025

Prince Castle EHB42F1-GMS02 Manual

15 December 2025

SkyRC TX58025 Manual

15 December 2025

La Crosse Technology LTV-THP1-C1 Manual

15 December 2025

Growatt MIN2.5-6KTL-XH2 Manual

15 December 2025

Bosch SBH6YCX02F Manual

15 December 2025

Eurosound HDBT-BYOD-EX1-P Manual

15 December 2025

Milwaukee MX Fuel MXF002 Manual

15 December 2025