Hager 75141830 Manual

Hager Ikke kategoriseret 75141830

Læs gratis den danske manual til Hager 75141830 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Hager 75141830, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/7
Touch/Glass sensor 1gang comfort with bus coupling unit
Order No. : 7514 1x xx
Touch/Glass sensor 2gang comfort with bus coupling unit
Order No. : 7514 2x xx
Touch/Glass sensor 3gang comfort with bus coupling unit
Order No. : 7514 3x xx
Touch/Glass sensor 4gang comfort with bus coupling unit
Order No. : 7514 4x xx
Operation- and
Assembly Instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Do not operate the device with sharp or pointed objects. The touch-sensitive surface
could be damaged.
Do not use sharp objects for cleaning. Do not use acids or organic solvents.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1
(1) User interface
(2) Sensor buttons for operating functions
(3) Status LED
(4) Operation LED
Seite 1/7
Touch/Glass sensor comfort
32585401
97-09937-000 16.09.2013
KNX
3 Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper
understanding.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database.
Planning, installation and commissioning of the device are carried out with the aid of KNX-
certified software. Full functionality with KNX commissioning software version ETS3.0d
onwards.
An updated version of the product database, technical descriptions and conversion programs
and other auxiliary programs are available on our Internet website.
Intended use
- Operation of loads, e.g. light on/off, dimming, blinds up/down, brightness values,
temperatures, calling up and saving light scenes, etc.
- Touch sensor: Installation in double flush-mounted appliance box according to DIN 49073
- Glass sensor: Installation in double installation socket for glass sensor (see chapter 6.3.
Accessories)
Product characteristics
- The pushbutton functions switching, dimming, controlling blinds, value transmitter, calling
up moods, etc.
- Operation through touching the sensor buttons
- LED to display status or actuation
- Integrated room temperature sensor for operation as controller extension
- Integrated bus coupling unit
4 Operation
The operation of functions or electrical consumers can be set individual for each device. Two
operating modes are used:
- Single button operation:
Switching on or off or dimming brighter/darker, e.g. of lighting, takes place alternately when
the same sensor button is pressed repeatedly.
- Two button operation:
Two sensor buttons next to each other form a function pair. Pressing the left button,
for example, switches or dims lighting on or brighter, pressing the right one switches it off
or makes it darker.
Operating a function or load
Consumers such as lighting, blinds, etc. are operated using the sensor buttons (2) and such
operation depends on the programming of the device.
o Press a sensor button.
The stored function is executed.
i The actuation pulse is relative to the length of touch. Depending on the function, short and
long actuations may trigger different actions, e.g. switching/dimming.
Cleaning the device
The device can be blocked for 60 s to prevent unintentional actions from being executed when
the glass is being cleaned.
o Recalling cleaning function by external telegram, e.g. from central
All the functions on the device are blocked for 60 s.
All the status LEDs of the sensor buttons flash.
i Cleaning with a lightly moistened, lint-free cloth, possibly with a mild glass cleaner. Do not
use sharp objects or abrasive cleaning agents, e.g. scouring powder.
Seite 2/7 16.09.2013
32585401
97-09937-000
KNX
Touch/Glass sensor comfort

Produkt Specifikationer

Mærke: Hager
Kategori: Ikke kategoriseret
Model: 75141830

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager 75141830 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Hager Manualer

Hager

Hager WXF228 Manual

10 August 2025
Hager

Hager UKM340480 Manual

10 August 2025
Hager

Hager TRC301B Manual

10 August 2025
Hager

Hager GS20109011 Manual

10 August 2025
Hager

Hager AKB42000402 Manual

10 August 2025
Hager

Hager WXT312 Manual

10 August 2025
Hager

Hager BKSAN065110 Manual

10 August 2025
Hager

Hager VR10127011 Manual

10 August 2025
Hager

Hager UKM240280 Manual

10 August 2025
Hager

Hager ESR3336029 Manual

10 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

FLIR

FLIR Tau SWIR Manual

8 September 2025
Beha-Amprobe

Beha-Amprobe AT-6030-EUR Manual

8 September 2025
Emko

Emko EAOM-19 Manual

8 September 2025
Reflexion

Reflexion LDDW320 Manual

8 September 2025
Ocean Matrix

Ocean Matrix OMX-16HMHM0001 Manual

8 September 2025
Emko

Emko ESM-9450 Manual

8 September 2025
Reflexion

Reflexion DVD36 Manual

8 September 2025
Milwaukee

Milwaukee M18 FFSDC16 Manual

8 September 2025
Emko

Emko EAOM-71 Manual

8 September 2025
Gamber-Johnson

Gamber-Johnson 7160-0422 Manual

8 September 2025