Hager 85121200 Manual

Hager Ikke kategoriseret 85121200

Læs gratis den danske manual til Hager 85121200 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Hager 85121200, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Relay insert
1/4
07/2012
Relay insert
Order no.: 8512 12 0x
Operating instructions
1. Safety instructions
Electrical equipment may only be installed and assembled by a qualied electrician in
accordance with the relevant installation standards, guidelines, regulations, directives,
safety and accident prevention regulations of the country.
Failure to comply with these instructions may result in damage to the device, re or other
hazards.
Hazard due to electric shock. Do not operate device without application module.
Hazard of re. During operation with inductive transformers, protect each transformer on
the primary side according to manufacturer's data. Use safety transformers that comply
with EN 61558-2-6 (VDE 0570 Part 2-6) only.
These instructions are an integral component of the product and must be retained by the
end user.
2. Design and layout of the device
(1)
(2)
(3)
(4)
(5)
(6)
Figure 1: Switch insert
(1) Switch insert
(2) Frames
(3) Application module
(4) Screw for dismantling protection (not R.1/R.3)
(5) Button design cover
(6) Connecting terminals
Relay insert
2/4
07/2012
3. Function
Correct use
–Only suitable for use in indoor areas with no drip and no spray water.
–Switching of incandescent lamps, HV halogen lamps, uorescent lamps, compact
uorescent lamps, dimmable energy-saving lamps, 230 V LED lamps and electronic or
inductive transformers with low voltage halogen lamps
–Installation into wall box according to DIN 49073
–Operate with suitable application module (see Chapter 6.3, "Accessories")
–Connection of extension unit push-button (NO contact), and motion detector extension unit
No mixed load operation of capacitive and inductive loads at the output.
4. Operation
These instructions describe the installation of the switch insert. The operation and function of
the application modules are described in the instructions of the respective application module.
The operation of extension units is only possible if a cover is attached to the main unit.
5. Information for electricians
5.1 Installation and electrical connection
DANGER!
Touching live parts can result in an electric shock.
An electric shock can be lethal.
Disconnect the connecting cables before working on the device and cover all live
parts in the area!
Circuiting and mounting the switch insert
µ
L
N
Figure 2: Basic circuit

Produkt Specifikationer

Mærke: Hager
Kategori: Ikke kategoriseret
Model: 85121200

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager 85121200 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Hager Manualer

Hager

Hager HXD040H Manual

22 Juli 2025
Hager

Hager JK202LE Manual

22 Juli 2025
Hager

Hager EC362 Manual

22 Juli 2025
Hager

Hager JK201SE Manual

21 Juli 2025
Hager

Hager REE501X Manual

21 Juli 2025
Hager

Hager EE702 Manual

21 Juli 2025
Hager

Hager WBC2V Manual

21 Juli 2025
Hager

Hager EC12125CT Manual

21 Juli 2025
Hager

Hager RED361X Manual

21 Juli 2025
Hager

Hager REE500X Manual

21 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech

Advantech AIR-020 Manual

29 Juli 2025
Tefal

Tefal Optiss BC5109 Manual

29 Juli 2025
Teslong

Teslong MS100-C Manual

29 Juli 2025
Advantech

Advantech TPC-651T Manual

29 Juli 2025
Advantech

Advantech TPC-B510 Manual

29 Juli 2025
Advantech

Advantech ARK-1220L Manual

29 Juli 2025
Gravity

Gravity MS 0200 SET1 Manual

29 Juli 2025
Advantech

Advantech FWA-5072 Manual

29 Juli 2025
Moulinex

Moulinex Oveo DD3001 Manual

29 Juli 2025
Silvergear

Silvergear E-reader Manual

29 Juli 2025