Hager 85221101 Manual

Hager Ikke kategoriseret 85221101

Læs gratis den danske manual til Hager 85221101 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Hager 85221101, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

1/6

07/2012

Blind insert comfort

Order no.: 8522 11 00

Operating instructions

1. Safety instructions

Electrical equipment must only be installed and assembled by a qualied electrician in

accordance with the relevant installation standards, directives, determinations and safety

and accident prevention directives of the country.

Failure to comply with these instructions may result in damage to the device, re or other

hazards.

Hazard due to electric shock. Disconnect before working on the device. Take into

account all circuit breakers that feed dangerous voltages to the device.

Hazard due to electric shock. The device is not suited for safe disconnection of the

mains supply.

Hazard due to electric shock. Do not operate device without the application module.

If several drives should be connected in parallel to one output, it is mandatory to observe

the manufacturer's data; use a cut-off relay where required. Drives can be destroyed.

Use blind drives with mechanical or electrical nal position switches only. Check nal

position switches for correct adjustment. Observe manufacturer's data. The device can

be damaged.

Hazard of injury. Use the device to control blind, shutter or awning drives only. Do not

switch any other loads.

Observe the motor manufacturer's data regarding change-over time and max.

switch-on time (ED).

Do not lay control lines in parallel to the motor lines (danger of coupling).

These instructions are an integral component of the product, and must be retained by the

end user.

2. Design of the device

(2) (1)

(3)

(5)

(4)

(6)

Figure 1: Shutter insert

(1) Shutter insert

(2) Frame

(3) Application module e.g. from a push-button for blinds

2/6

07/2012

(4) Screw for dismantling protection (not R.1/R.3)

(5) Blind button design cover

(6) Connecting terminals

3. Function

Correct use

–Switching electrically operated blinds, shutters, awnings and similar hangings.

–Circuiting of extension units push-buttons for blinds, blind inserts, key push-buttons for

blind possible

–Only suitable for use in indoor areas, no drip or spray water.

–Installation in wall box according to DIN 49073.

–Operate with suitable application module (see Chapter 6.2, "Accessories")

Product characteristics

–2 mechanically and electrically mutually locked relay contacts.

4. Operation

These instructions describe the installation of the shutter insert. The operation and function of

the application modules are described in the instructions of the respective cover.

�

The function of the extension unit is only possible when there is an application module

attached to the master unit.

5. Information for electricians

5.1 Assembly and electrical circuiting

DANGER!

Touching live parts can result in an electric shock.

An electric shock can be lethal.

Disconnect the connecting cables before working on the device and cover all live

parts in the area!

Circuiting and mounting of shutter insert

Figure 2: Shutter insert circuiting diagram

A MCB max. 10 A is installed as device protection.

Circuit shutter insert according to circuiting diagram (Figure 2)

Install shutter insert in wall box (recommended: deep box). The connection terminals must

be at the bottom.

Attach the frame and application module (see instructions for application module).

Produkt Specifikationer

Mærke:	Hager
Kategori:	Ikke kategoriseret
Model:	85221101

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager 85221101 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Hager Manualer

22 Juli 2025

22 Juli 2025

22 Juli 2025

21 Juli 2025

21 Juli 2025

21 Juli 2025

21 Juli 2025

Hager EC12125CT Manual

21 Juli 2025

Hager RED361X Manual

21 Juli 2025

Hager REE500X Manual

21 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech AIR-020 Manual

29 Juli 2025

Tefal Optiss BC5109 Manual

29 Juli 2025

Teslong MS100-C Manual

29 Juli 2025

Advantech TPC-651T Manual

29 Juli 2025

Advantech TPC-B510 Manual

29 Juli 2025

Advantech ARK-1220L Manual

29 Juli 2025

Gravity MS 0200 SET1 Manual

29 Juli 2025

Advantech FWA-5072 Manual

29 Juli 2025

Moulinex Oveo DD3001 Manual

29 Juli 2025

Silvergear E-reader Manual

29 Juli 2025