Hager EG 171 Manual

Hager Skifte EG 171

Læs gratis den danske manual til Hager EG 171 (2 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Hager EG 171, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

of f

OFF

enter

reset

prog

aut o

manu

EG 171

Working principle :

The EG 171 is a time switch especially

designed to control any timed delayed

application (school bells, fans, etc...).

It is fully programmable with a maximum

of 20 program steps. Each program step

can be applied to one or several days,

maximising the use of each memory

location.

The front cover is sealable preventing

unauthorised access after completion of

programming.

Warning : at the beginning of use, please

reset the device in order to clear the

memory before programming.

This is achieved by using a pen to push

the reset button.

Presentation :

Display :

➀time

➁circuit status (ON or OFF)

➂day of the week

(1 = Monday, 2 = Tuesday ....)

Buttons :

➃Mode selector : to select one of the

following modes :

time setting

prog programming

auto running mode

manu manual override

➄“1” to “7” : selection of the days

➅“on/off” : chooses whether the circuit

is on or off

➆“+” and “-” : changes settings

➇“enter” : to confirm

➈“reset”

Time and day setting :

1. Move mode selector to

2. Select with key “ ”1 to “ ”7 , the actual day

(1 = Monday, 2 = Tuesday.)

3. Input time with buttons “ ”+ and “ ”-.

Important :

The clock starts when exiting the time setting mode.

Programming :

1. Move mode selector to “ ”prog .

2. Input the impulse duration with keys “ ”+ and “ ”-

from 1 to 59 seconds (in 1 sec. increment),

then from 1 to 99 minutes (in 1 min. increment).

- seconds are shown as e.g. 10”

- minutes are shown as e.g. 2’

3. Select with keys “1” “ to 7” the day(s) assigned

to this program step. An arrow appears

above each day concerned.

4. Input switching time with buttons “ ”+ and “ ”-.

5. Enter this program step with button “enter”.

Program additional time settings by repeating

steps 3 to 5.

To modify the impulse duration while programming,

press “on/off” key.

To switch back to programmation, press “on/off”.

Important :

To activate the program, move mode selector to

“auto”.

Running Auto mode

This mode is the current displaying mode.

It does not allow any modification.

Move mode selector to “ ”auto .

Display of the time, the day and the state of the

channel.

To check your program :

1. Move mode selector to “ ”prog .

2. Press the “enter” key repeatedly to display

the different program steps (switching

time and days assigned).

To override the output :

Permanent override :

1. Move mode selector to “ ”manu .

2. Select the state of the output with key

“on/off”.

To switch back to automatic mode, move

mode selector to “auto”.

1 2 3 4 5 6 7

6 7 8 9

enter

reset

off

prog

auto

manu

OFF

1 2 3 4 5 6 7

enter

reset

off

prog

auto

manu

To modify or delete a program step :

1. Move mode selector to “ ”prog .

2. If necessary modify the impulse duration

and confirm with “ ”enter .

3. Press “ ” enter repeatedly and select the

program step to modify or to delete.

4. Modify :

- switching time with keys “ ”+ or “ ”-

- days assigned with keys “ ”1 to “ ”7

(an arrow flashes above all days assigned,

press once to add a day, press twice to

cancel).

- impulse duration by pressing key “on/off”

and then with “ ”+ and “ ”-

To delete a program step, press keys to “ ”1

“ ”7 in order to cancel all days assigned.

5. Confirm with the “ ”enter key.

1 impulse channel time

switch - weekly cycle

1 2 3 4 5 6 7

enter

reset

off

prog

auto

manu

1 2 3 4 5 6 7

enter

reset

off

prog

auto

manu

1 2 3 4 5 6 7

enter

reset

off

prog

auto

manu

User instruction GB

6E 6131.b

EG 171

3 4 5 621

Technical specifications :

Electrical characteristics :

- supply voltage : 230V +10/-15% 50Hz

- output : 1 changeover contact

µ 16A - 250V AC1.

µ 3A - 250V cos = 0.6

1000 W incandescent lighting

- power consumption : 1 VA

- protection degree : IP20

- insulation class : II

Functional characteristics :

- accuracy : ± 1sec. / day at 20 °C

- operating reserve : lithium battery,

total of three years.

Environment :

Operating temperature : -10 to +50 °C

Storage temperature : -10 to +50 °C

Connection tunnel terminals :

flexible : 0,5 to 2.5 mm2

rigid : 0,5 to 4 mm2

Dimensions : 3 modules (3x17,5mm)

Electrical connections :

1. Move mode selector to “manu”.

2. Select the state of the output with key

“on/off”.

3. Input with key “+” and “-” the override duration :

from 1 to 23 hours by steps of 1 hour,

then from 1 to 27 days by steps of 1 day.

4. Move mode selector to “auto”.

The state indication is flashing. This means a

timed override. Return to the initial program

after the duration.

To reset the time switch :

Press “ “reset to clear the program.

1. Move mode selector to “manu”.

2. Press key “- +” “or ” until display -h.

3. Move mode selector to “ ”auto to switch

back to automatic mode.

Timed override :

To cancel the timed override :

1 2 3 4 5 6 7

enter

reset

off

prog

auto

manu

1 2 3 4 5 6 7

enter

reset

off

prog

auto

manu

A warranty period of 24 months is offered on hager products,

from date of manufacture, relating to any material of manu-

facturing defect. If any product is found to be defective it must

be returned via the installer and supplier (wholesaler). The

warranty is withdrawn if :

- after inspection by hager quality control dept the device is

found to have been installed in a manner which is contrary to

IEE wiring regulations and accepted practice within the industry

at the time of installation.

- the procedure for the return of goods has not been followed.

Explanation of defect must be included when returning

goods.

Warranty GB

Produkt Specifikationer

Mærke:	Hager
Kategori:	Skifte
Model:	EG 171

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager EG 171 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Hager Manualer

3 April 2025

3 April 2025

31 Marts 2025

31 Marts 2025

31 Marts 2025

31 Marts 2025

31 Marts 2025

6 Februar 2025

6 Februar 2025

1 Januar 2025

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025

Crestron CLW-LSWEX-2GD Manual

1 April 2025

Vimar 30181.120 Manual

1 April 2025