Hager EG403E Manual

Hager Ikke kategoriseret EG403E

Læs gratis den danske manual til Hager EG403E (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Hager EG403E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

1 6E 6354E

A B

1 3 5

2 4 6 8 10 12 14 16

11 13 157 9

EG403E

➀

➀Input for external override

➁Option

Connection diagram

6E 6354E

§4 channel programmer

weekly cycle with

programming key

User instructions

Navigation &

value setting

Validation

Enter in PROGRAMME mode &

return to previous step

Selection of days of the week

1 = Monday, 2 = Tuesday

... 7 = Sunday.

Canal B command

Canal C command

Canal D command

Canal A command

DCF Antenna (option)

Keyboard locked by PIN code

menu +ok

EG403E

Product Presentation

Presentation

⦁Product delivered with current time and date set.

⦁Automatic change of summer/winter time.

⦁Programming key

-For permanent overrides

-For program copy or save

⦁300 programme steps ; ON, OFF, pulses or .

⦁Permanent overrides On or Off ( permanent light on).

⦁Temporary overrides On or Off ( flashing).

⦁Overrides (temporary, permanent or time delayed) remote activation possible.

⦁Simulation of presence .

⦁Keyboard lock function by PIN number.

⦁Counter of operating time on every output.

⦁Programmable with power off.

⦁Display with backlight.

Technical specifications

Electrical characteristics

• Supply voltage 230 V 10/-15%+

• Frequency 50/60 Hz

• Power consumption < 2 VA

• Output 2 changeover 2 NO contacts+

• Maximum load

AC1 µ 10A 250 V~

Incandescent lighting: 1500 W

Halogen lighting

Compensated fluorescent tubes //

(max. 45 µF) 400 W

Non compensated fluorescent tubes,

compensated in series 1000 W

Compact fluorescent lamps 400 W

• Minimum load

AC1 100 mA 250 V~

• Galvanic insulation between power supply and

output < 4 kV

•Rated impulse voltage 4 kV

Functional characteristics

• Programming capacity 300 steps

• Minimum time between 2 steps 1 minute

• Running accuracy ± 0,2 sec/ 24h

• Operating reserve lithium battery, total of 5

years autonomy (unlimited programme backup)

• The product is set into standby state (display

switched-off) after 1 minute with power off.

It switches back into automatic mode as soon

as power is back on or when pressing any key.

• Protection degree IP 20 / IK 04

•Action type 1B

•Degree of pollution 2

•Software class A

Environment

• Operating temperature -10 °C to 50 °C+

• Storage temperature -20 °C to 70 °C+

•Temperature for the ball pressure Test

75° to 125°C

Connection by quick-connect terminals

• Flexible 0,75 to 2,5 mm2

• Rigid 0,75 to 2,5 mm2

Standards

60730-1

60730-2-7

➁

EG001

§Warranty

NOT APPLICABLE FOR AUSTRALIA

A warranty period of 24 months is offered on hager

products, from date of manufacture, relating to any material

of manufacturing defect. If any product is found to be

defective it must be returned via the installer and supplier

(wholesaler). The warranty is withdrawn if:

- after inspection by hager quality control dept the device is

found to have been installed in a manner which is contrary

to IEE wiring regulations and accepted practice within the

industry at the time of installation.

- The procedure for the return of goods has not been

followed. Explanation of defect must be included when

returning goods.

This device must be installed only by

a qualified electrician according to the

installation standards in force in the

country.

Usable in all Europe

and in Switzerland

6E 6354E2

Creating the weekly programme:

CYCLE

CHANNEL D

FUNCTIONS

SETTINGS

CHANNEL C

CHANNEL B

HOLIDAYS

IMPULSE

OFF

MONDAY

BACK

AUTO

DELETE

MODIFY

PROGRAM

COPY

PROGRAM

DELETE

PROGRAM

MODIFY

PROGRAM

READ

PROGRAM

CREATE

CHANNEL A

WEEKLY

PROGRAM

YES

MONDAY

SUNDAY

SET

MINUTE

00:00

07:00

CONTINUE

PROGRAM

SET

HOUR

00:00

PROGRAM CREATE

PROGRAM

FUNCTIONS

SETTINGS

PROGRAM

*The cycle

programme is only

possible if one or

several cycles have

been defined in the

FUNCTION/CYCLE

menu.

At any time, pressing the button menu allows you

to return to the previous choice level.

Press the button menu to access the programming/

setting mode.

All of the programming and adjustments are

based on the following principle:

- the 1st line and/or 2nd line of the display

indicate the requested setting,

- the buttons / allow navigation through the+-

menus and settings,

- the button allows validation.ok

Pressing the button menu allows you to access

the following settings:

PROGRAM SETTINGS FUNCTIONS

DATE-TIME

S/W TIME

LANGUAGE

FACTORY

SETTINGS

BACK AUTO

PROGRAM

CREATE

PROGRAM

READ

PROGRAM

MODIFY

PROGRAM

DELETE

PROGRAM

COPY

BACK AUTO

COUNTER

CYCLE

PIN CODE

INPUT

BACK AUTO

When using for the first time, the following

settings must be done:

- select the language

- select the year, month, day

- select the hour and the minutes

- select the automatic change summer/winter.

Press the buttons / to set the display.+ –

Press to validate.OK

When the settings are finished, the clock goes to

automatic mode.

First commissioning

Pressing simultaneously the , , , keysmenu – + ok

allows you to réinitialize the product.

The program is kept in memory.

Reinitializing

Creating a holiday programme

The Holiday programme allows you to define one

period during which the output contact is on ON

or OFF.

This programme has the highest priority.

To define your Holiday programme:

To visualise a programme

To check the steps of the recorded programme

without risk of modifying or deleting.

PROGRAMME READ

HOLIDAYS

WEEKLY

BACK

AUTO

DELETE

MODIFY

HOLIDAYS

OFF

NOT

REPEATED

VARIABLE

DATE

HOLIDAYS

FIX

DATE

14.07 - 03.08

HOLIDAYS

CONTINUE

PROGRAM

START

MONTH

01.07

START

DAY

14.07

END

MONTH

01. 08

END

DAY

03.08

Select:

- FIX DATE: if the programme must be repeated

every year at the same dates.

- VARIABLE DATE ( ) if the dates must be

recalculated every year according to the dates

of Easter.

- NOT REPEATED: if the programme is to be

activated once only.

Validate by .ok

FUNCTIONS

SETTINGS

PROGRAM

COPY

PROGRAM

DELETE

PROGRAM

MODIFY

PROGRAM

READ

PROGRAM

CREATE

PROGRAM

The number of free program steps is displayed.

Press to validate.ok

The buttons and allow you to scroll the+ –

programme steps.

At the end of the visualisation, press .ok

Produkt Specifikationer

Mærke:	Hager
Kategori:	Ikke kategoriseret
Model:	EG403E

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager EG403E stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Hager Manualer

10 Juni 2025

10 Juni 2025

10 Juni 2025

12 Januar 2025

Hager Vision VKG004A-T Manual

11 Januar 2025

Hager GS11019016 Manual

30 December 2025

30 December 2025

30 December 2025

30 December 2025

30 December 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet Audio P100CPA Manual

15 Juni 2025

Sabrent BK-MAC2 Manual

15 Juni 2025

Planet Audio P9950CPA Manual

15 Juni 2025

FC-CTH-01 Manual

15 Juni 2025

Cleveland 22CGT6 Manual

15 Juni 2025

Auray SVRK-4U-S Manual

15 Juni 2025

Bobrick B-2860 Manual

15 Juni 2025

Sony ODBK-103 Manual

15 Juni 2025

Planet Audio P70CPA Manual

15 Juni 2025

Gourmia GAF657 Manual

15 Juni 2025