Hager HIC425E Manual

Hager Afbryder HIC425E

Læs gratis den danske manual til Hager HIC425E (6 sider) i kategorien Afbryder. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Hager HIC425E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

1 6LE001133A.d

6LE001133A.d

HIC4xxE

Preliminary operations

Check the following upon delivery and after removal

of the packaging:

• Packaging and contents are in good condition.

• The product reference corresponds to the order.

• Contents should include:

- 1 x motorised changeover switch

- 1 x emergency handle and ﬁ xing clip

- 1 x quickstart instruction sheet.

Accessories

• Bridging bars and connection kits.

• Terminal shrouds.

• Terminal shield.

• Voltage sensing kit.

• HZI911 interface.

• Current transformers.

• Plug-in optional modules: RS485 MODBUS

communication, 2 inputs/2 outputs, Ethernet

communication, Ethernet communication +

RS485 JBUS/MODBUS gateway, Analogue

outputs, Pulse outputs.

This quick start is intended for personnel trained in

the installation and commissioning of this product.

For further details refer to the product instruction

manual available on the hager website.

• This product must always be installed and

commissioned by qualiﬁ ed and approved

personnel.

• Maintenance and servicing operations should be

performed by trained and authorised personnel.

• Do not handle any control or power cables

connected to the product when voltage may be,

or may become present on the product, directly

through the mains or indirectly through external

circuits.

• Always use an appropriate voltage detection

device to conﬁ rm the absence of voltage.

• Ensure that no metal objects are allowed to fall

in the cabinet (risk of electrical arcing).

Failure to observe good enginering practises as

well as to follow these safety instructions may

expose the user and others to serious injury or

death.

Installation and commissioning

Clip for

storage

of the

emergency

handle

Risk of electrocution, burns or injury to

persons and/or damage to equipment.

Risk of damaging the device.

In case the product is dropped or

damaged in any way it is recommended

to replace the complete product

Step 1

Cabinet/

Back Plate

Installation

Step 2

Connecting the

power section

Step 3

COMMAND/

CONTROL

terminal

connections

Step 4

Power SUPPLY

and controller

terminal

connections

Step 5

Check

Step 6

Programming

Step 7A

AUT Mode

(Automatic

Control)

Step 7B

AUT Mode

(Remote

Control)

Step 7C

Emergency

Manual

Operation

Step 7D

Padlocking

Motorised source changeover switch

125A - 630A

Produkt Specifikationer

Mærke:	Hager
Kategori:	Afbryder
Model:	HIC425E

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager HIC425E stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Afbryder Hager Manualer

11 August 2025

11 August 2025

11 August 2025

10 August 2025

Hager HET040JR Manual

10 August 2025

10 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

Afbryder Manualer

Nyeste Afbryder Manualer

Doepke DLS 6h C13-1 Manual

2 Oktober 2025

Doepke DLS 6i B25-1 Manual

2 Oktober 2025

Doepke DLS 6h C06-1 Manual

2 Oktober 2025

Doepke DLS 6i B02-1 Manual

2 Oktober 2025

Doepke DLS 6i C01-1 Manual

1 Oktober 2025

Doepke DLS 6i C50-3 Manual

1 Oktober 2025

Doepke DLS 6i C20-3 Manual

1 Oktober 2025

Doepke DLS 6h C25-1 Manual

30 September 2025

Doepke DLS 6h B10-4 Manual

30 September 2025

Doepke DLS 6i C06-1 Manual

30 September 2025