Hager HIC440G Manual

Hager Afbryder HIC440G

Læs gratis den danske manual til Hager HIC440G (6 sider) i kategorien Afbryder. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Hager HIC440G, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Step 1

Cabinet /

Back Plate

Installation

Step 2

Connecting the

power section

Step 3

COMMAND /

CONTROL

terminal

connections

Step 4

Power SUPPLY

and

controller

terminal

connections

Step 5

Check

Step 6

Programming

Step 7A

AUT Mode

(Automatic

Control)

Step 7B

AUT Mode

(Remote

Control)

Step 7C

Emergency

Manual

Operation

Step 7D

Padlocking

6LE001123A.e

Preliminary operations

Check the following upon delivery and after removal

of the packaging:

• Packaging and contents are in good condition.

• The product reference corresponds to the order.

• Contents should include:

- 1 x motorised changeover switch

- 1 x emergency handle and ﬁ xing clip

- 1 x quick start instruction sheet.

Accessories

• Bridging bars and connection kits.

• Terminal shrouds.

• Terminal shield.

• Voltage sensing kit.

• Sealable cover.

This quick start is intended for personnel trained in

the installation and commissioning of this product.

For further details refer to the product instruction

manual available on the hager website.

• This product must always be installed and

commissioned by qualiﬁ ed and approved

personnel.

• Maintenance and servicing operations should be

performed by trained and authorised personnel.

• Do not handle any control or power cables

connected to the product when voltage may be,

or may become present on the product, directly

through the mains or indirectly through external

circuits.

• Always use an appropriate voltage detection

device to conﬁ rm the absence of voltage.

• Ensure that no metal objects are allowed to fall

in the cabinet (risk of electrical arcing).

Failure to observe good enginering practises as

well as to follow these safety instructions may

expose the user and others to serious injury or

death.

Installation and commissioning

Clip

for storage

of the

emergency

handle

Motorised changeover switch

125A - 630A

Risk of electrocution, burns or injury to

persons and/or damage to equipment.

Risk of damaging the device.

In case the product is dropped or

damaged in any way it is recommended

to replace the complete product

HIC4xxG

2. Power terminal connections

Use terminal lugs, rigid or ﬂ exible busbars.

2 6LE001123A.e

Orientation

Recommended OK

OK NO

Fix. 195

Fix. 180

Ø7

Ø9

Fix. 180

Fix. 195

Dimensions in mm

125A 160A 200A 250A 315A 400A 500A 630A

Minimum Cu

cable section

at Ith

(mm

) 35 50 95 120 185 2 x 95 2 x 120

Minimum Cu

busbar section

at Ith

(mm

) - 2 x 30 x 5 2 x 40 x 5

Maximum Cu

cable section

(mm

) 50 95 120 150 240 2 x 185 2 x 300

Maximum Cu

busbar width

(mm) 25 32 50

Type of screw

M8 M10 M12

Recommended

tightening

torque

(N.m) 8,3 20 40

Maximum

tightening

torque

(N.m) 13 26 45

125A 160A 200A 250A 315A 400A 500A 630A

J1 34 35 34

M150 210 270

T36 50 65

C244 320

U20 25 35 32 45

W9 11 13

CA 10 15 20

1. Installation

Ensure that the product is installed

on a ﬂat rigid surface.

Door cut-out for front panel









3. CONTROL/COMMAND terminals

Ensure that the product is in Manual Mode.

Produkt Specifikationer

Mærke:	Hager
Kategori:	Afbryder
Model:	HIC440G

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager HIC440G stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Afbryder Hager Manualer

11 August 2025

11 August 2025

11 August 2025

10 August 2025

Hager HET040JR Manual

10 August 2025

10 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

Afbryder Manualer

Nyeste Afbryder Manualer

Gewiss GW95126 Manual

30 Juli 2025

Gewiss GW95180 Manual

30 Juli 2025

Gewiss GW94370 Manual

30 Juli 2025

Biltema 44-0011 Manual

25 Juli 2025

Biltema 44-0010 Manual

24 Juli 2025

Biltema 44-0008 Manual

24 Juli 2025

Biltema 44-0012 Manual

24 Juli 2025

Doepke DRCCB 5 ST 025-4/0 Manual

9 Juli 2025

Doepke DFS 4 016-4/0,30-F Manual

9 Juli 2025

Doepke DMCB 2 C125-3 Manual

9 Juli 2025