Hager JKD250TMID Manual

Hager Ikke kategoriseret JKD250TMID

Læs gratis den danske manual til Hager JKD250TMID (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 56 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 28.5 anmeldelser. Har du et spørgsmål om Hager JKD250TMID, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

HGR42EW

Energy Meters

Hager Ltd. Hortonwood 50 Hortonwood, Telford, TF1 7FT / 01952 675 675

by Rayleigh Instruments

E&OE. Please check critical parameters at time of order. ISSUE : 2019091

Product Description

The HGR42EW series is part of the easywire® family of

meters, designed to save up to 90% installation time compared

to a standard meter and current transformer installation.

The meters contain two 3 Phase metering circuits in one case,

and accept inputs from two separate easywire® 3 Phase

current transformers while still utilizing the same voltage

reference.

This MID approved, 4 module DIN rail mounted multifunction

energy meter, is suitable for monitoring energy consumption

and other electrical parameters in industrial and commercial

applications. This series is particularly suited for use in split-

load lighting and power boards, in three phase applications,

and have been certied for billing purposes.

A high eciency white backlit LCD display provides a clear

indication of measured values in all light conditions. Front

push-buttons allow user access to the display page required.

The meter is available in two versions:-

• With two pulse outputs and RS485 Modbus communication.

• With two pulse outputs and Mbus communication

• Four module DIN rail mounted

• Energy pulse LED / High denition white backlit LCD display

• 2 x Inputs from easywire® Current Transformers

• Three phase network compatible

• Independently programmable CT ratios (Load 1 and Load 2)

• Programmable voltage transformer ratio

• True RMS measurement

• MID B+D Certied

• Simple programming & operation / auto or manual page scrolling

• 2 x Pulse outputs and Modbus communication or Mbus

• Voltage OUT connector for daisy-chaining up to 32 meters from

one supply

HGR42EW Series

Split Load Three Phase easywire®

Multifunction DIN Rail

Energy Meter (MID Certied)

Displayed Parameters

Voltage - L-L, L-N and average

Current - Per phase and average (LOAD 1 and LOAD 2)

Power Factor - per phase and average

Frequency

Power - Active, Reactive and Apparent (per phase and total)

Power Max. demand - Active and apparent power.

Energy - Active, reactive and apparent (per load and total)

Measuring Instruments Directive

MID MID A FORPPROVED

BILLING A ICATIONSPPL

MID

Communications Part Number

Split Load Input with RS485 Modbus Output and

Two Pulse Outputs kWh (1 per circuit)

HGR42EWC

Split Load Input with Mbus Output and Two Pulse

Outputs kWh (1 per circuit)

HGR42EWMB

E&OE. Please check critical parameters at time of order. ISSUE : 2019091

HGR42EW

Energy Meters

Hager Ltd. Hortonwood 50 Hortonwood, Telford, TF1 7FT / 01952 675 675

by Rayleigh Instruments

Display

Display Type LCD, high denition with white back-light

Digit height 6.35mm (displayed parameter)

Page scrolling Manual by front key / or auto scroll mode

Displayed parameters and accuracies Voltage 0.5% of full scale

Current 0.5% of full scale

Frequency 0.1% of full scale (L-N >20V)

Power factor 1% of unity

Active power 1%

Reactive power 1%

Apparent power 1%

Active Energy Class 1, Class B (IEC/EN62053-21, IEC/EN50470)

Reactive Energy Class 2 (IEC/EN62053-23)

Energy maximum display 9999999

Resolution 0.01K, 0.1K, 1K, 0.01M, 0.1M (depending on CT ratio & VT ratio)

Programming

Parameters that can be changed using program-

ming menu

NOTE: Once Programming Mode Is entered

The values in red will be locked out after

15 Mins. No further adjustment is possible

without return to factory.

CT Primary current

VT primary voltage

VT secondary voltage

Communication address

Communication speed (Baud)

Communication Parity

Communication number of stop bits

Back-light time-out period

Demand period (for integration)

Pulse duration

Pulse output (kWh)

Reset to Factory Default

Reset Energy and Maximum Demand

Reset Active Energy

Reset Reactive Energy

Reset Apparent Energy

Reset Maximum Current

Reset Maximum Active Power

Reset Minimum Active Power

Reset Maximum Reactive Power

Reset Minimum Reactive Power

Reset Maximum Apparent Power

Programming access Password protected (user selectable)

Memory retention Non volatile memory

Produkt Specifikationer

Mærke:	Hager
Kategori:	Ikke kategoriseret
Model:	JKD250TMID

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager JKD250TMID stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Hager Manualer

22 Juli 2025

22 Juli 2025

22 Juli 2025

21 Juli 2025

21 Juli 2025

21 Juli 2025

21 Juli 2025

Hager EC12125CT Manual

21 Juli 2025

Hager RED361X Manual

21 Juli 2025

Hager REE500X Manual

21 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo EMME-AS-80-M-LS-AMB Manual

30 Juli 2025

Tiptop Audio Octogain Manual

30 Juli 2025

Artec SE-ADL Manual

30 Juli 2025

Intermatic WH40 Manual

30 Juli 2025

Deye SUN-M160G4-EU-Q0-I Manual

30 Juli 2025

Festo EMMB-AS-60-02-S30SB Manual

30 Juli 2025

Festo VPPM-6F-L-1-F-0L6H-V1P-C1 Manual

30 Juli 2025

Intermatic R8806P101C Manual

30 Juli 2025

CSL 300735 Manual

30 Juli 2025

Advantech PCM-27D24DI Manual

30 Juli 2025