Hager WGCC1SNB Manual

Hager Ikke kategoriseret WGCC1SNB

Læs gratis den danske manual til Hager WGCC1SNB (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Hager WGCC1SNB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

www.hager.com

Safety instructions

Electrical equipment must only be installed and assembled by a qualied

electrician in accordance with the relevant installation standards, regulations,

directives and safety and accident prevention directives of the country.

Failure to comply with these installation instructions may result in damage to

the device, re or other hazards.

Function

Multiple frames for 2gang to 5gang combinations of ush-mounted devices. Dierent

versions for horizontal and vertical installation.

The frames are compatible with most ush-mounted devices of the Hager Muse:

design with centre plates (Width x Height) = 65 x 52 mm.

In case of centre plates 52 x 52 mm, the accomodation ring must be used.

Not compatible with centre plates 52 x 65 mm.

Correct use

- For ush-mounted installation with standard connectable wall boxes.

- Only suitable for use in indoor areas with no drip and no spray water.

Technical data

Hager Muse:

Dimensions (Width x Height)

- 2gang horizontal 172 x 86 mm

- 3gang horizontal 258 x 86 mm

- 4gang horizontal 344 x 86 mm

- 5gang horizontal 430 x 86 mm

Hager Inspire:

Dimensions (Width x Height)

- 2gang horizontal 172 x 86 mm

- 3gang horizontal 258 x 86 mm

- 4gang horizontal 344 x 86 mm

- 5gang horizontal 430 x 86 mm

- 2gang vertical 86 x 172 mm

- 3gang vertical 86 x 258 mm

Multi-gang frames

2gang / 3gang / 4gang / 5gang

Hager Muse / Hager Inspire

Installation manual

Information for electricians

Installation and electrical connection

Preparing the devices for installation

Remove frame at every single device to be combined

(see installation manual of the respective device).

Hager Inspire:

Furthermore, remove cover plate at every single device

(see installation manual of the respective device).

Installing the devices into the wall boxes

(for example with “3gang frame (horizontal)”)

DANGER!

Touching live parts can result in an electric shock.

An electric shock can lead to death.

Disconnect the connecting cables before working on the device and

cover all live parts in the area!

Arrange the devices horizontally or vertically in the desired order depending on

frame type. Example here: horizontal.

Wire each device of the combination according to its wiring diagram

(see installation manual of the respective device).

After wiring, x the devices with the screws into the wall boxes ( ).1

Produkt Specifikationer

Mærke:	Hager
Kategori:	Ikke kategoriseret
Model:	WGCC1SNB

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager WGCC1SNB stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Hager Manualer

10 Juni 2025

10 Juni 2025

10 Juni 2025

12 Januar 2025

Hager Vision VKG004A-T Manual

11 Januar 2025

Hager GS11019016 Manual

30 December 2025

30 December 2025

30 December 2025

30 December 2025

30 December 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ENTES GEMO-10-DR-4G Manual

14 Juni 2025

Marshall VAC-12SH Manual

14 Juni 2025

Rane MX 22 Manual

14 Juni 2025

Vulcan VCH88 Manual

14 Juni 2025

Fluke SB140 Manual

14 Juni 2025

Blodgett BCT-101G Manual

14 Juni 2025

Rival 11570 Manual

14 Juni 2025

CDN MT1 Manual

14 Juni 2025

Savage Bros. FireMixer-14 Manual

14 Juni 2025

HMS Premium STR01 Manual

14 Juni 2025