Hager WGCXHKTRFIDAS Manual

Hager Ikke kategoriseret WGCXHKTRFIDAS

Læs nedenfor 📖 manual på dansk for Hager WGCXHKTRFIDAS (4 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 23 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
www.hager.com
Safety instructions
Electrical equipment must only be installed and assembled by a qualied
electrician in accordance with the relevant installation standards, regulations,
directives and safety and accident prevention directives of the country.
Failure to comply with these installation instructions may result in damage to
the device, re or other hazards.
Function
The key card switch is used for central switching on of electric loads by inserting a
key card as well as for storage of the key card. The key card switch is installed in the
entrance area. When the key card is removed the connected loads will be switched
o automatically after the delay time has expired (approx. 30 seconds) and the LED
orientation light of the key card switch is switched on.
The key card switch RFID works exclusively with the RFID key card programmed
for this purpose.
16A key card switch - mechanical
16A key card switch - RFID
Hager Muse / Hager Inspire
Installation and operating
instructions


Produkt Specifikationer

Mærke: Hager
Kategori: Ikke kategoriseret
Model: WGCXHKTRFIDAS

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager WGCXHKTRFIDAS stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Hager Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer