Haier HW-07LM13 Manual

Haier Aircondition HW-07LM13

Læs gratis den danske manual til Haier HW-07LM13 (2 sider) i kategorien Aircondition. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Haier HW-07LM13, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ROOM AIR CONDITIONER

AMW18C13-M(T3)

OFF

OFFON

HIGH

FAN

LOW

FAN

HIGH

COOL

LOW

COOL

MIN

COOL MAX

COOL

TEMP. MODE

Wait 3 Minutes Before Restarting

AUTO SWING

5 6

OFFON

TEMP.

Wait 3 Minutes Before Restarting

AUTO SWING

OFF

HIGH

FAN

LOW

FAN

HIGH

COOL

LOW

COOL

MODE

MIN

COOL

MAX

COOL

5 6

OFF

OFFON

HIGH

FAN

LOW

FAN

HIGH

COOL

LOW

COOL

MIN

COOL MAX

COOL

TEMP. MODE

Wait 3 Minutes Before Res tarting

AUTO SWING

5 6

OFF

D.B W.B D.B W.B D.B W.B D.B W.B D.B W.B D.B W.B

Max.Temperture:

℃

Min.Temperture:

℃

/18

℃

/18

℃

Indoor OutdoorIndoor Outdoor

Cooling

Indoor Outdoor

SELECTION OF THE INSTALLATION POSITION

THE ENCLOSED ACCESSORIES OF THE CONDITIONER

INSTALLATION PROCEDURES

PREPARATIONS BEFORE INSTALLATION

AIR CONDITIONER INSTALLATION

Fig.1

Wall

Water outlet flexible

pipe(provide by user)

1. Fix the prefabricated iron frame to stable position by expansible screws.

2. Put the whole machine with all the accessories installed,

on the iron frame. If there's water outlet flexible pipe, lead

it to needed position(see Fig.1).

3. Fill any distance between the wall hole and the machine body with flexible sponge rubber strip to

prevent the entering of outer noise and the leaking of the coolness.

4. After installation of the conditioner, insert the power plug into the outlet and perform test-run.

Make the wall hole or window hole (see Fig.1)

Fig. 1

Width of the wall

Iron frame

MODEL A B

440mm 635mm

395mm 615mm

370mm 485mm

HW-07LM03 HW-07LM13

HW-09LM03 HW-09LM13

HW-12LM03 HW-12LM13

HW-12LMA03

HW-18LM03(T3)

HW-24LM03(T3)

HW-18LM13(T3)

HW-18LM13

AMW18C13-M(T3)

HW-24LM13(T3)

1,The air-conditioner is better installed in shadow or in a place

with short period of sunshine. In case the air-conditioner is

installed at the point exposed directly to the sunshine, it should

be protected from the direct sunlight as possible in order to

avoid the long time of direct sunlight otherwise its performance

will be lowered. (As illustrated in Fig. 1).

2. For the convenience of operation, it is

recommended that air-conditioner be installed at

least at the height of 760-1300 mm above the

floor and no obstacles before it for a free airflow.

3.The shutters at both sides and the top of

air-conditioner should be protruded outdoors free

from being blocked by wall, window,ect.

4.The back of air-conditioner should be kept over

500mm from the obstacles (for example, wall,

etc.) (As illustrated in Fig. 2).

5.To have an efficient drainage, the back part of

the air-conditioner should be inclined downward

by 25-35mm (As illustrated in Fig. 3).

Install air-con at a place strong enough to support the unit.

Leave enough space around air inlet and outlet for better circulation.

Avoid places where flammable gas leaks.

Problems may occur if unit is installed in the following places:

Place where oil exists in the air including engine oil or seaside with

salt breeze blows and hot spring area with sulphurous gas in the air.

For longer and trouble-free operation of the unit, pay special attention to the following:

NOTES:

Outlet pipe fitting

Sealed gasket

Manual

Rubber lid

Name

Figure

1 1 1 1

(ONLY FOR REFERENCE)

cover

support

fig.1

>500mm

fig.2

25-35mm

fig.3

Cautions

Power cord: Be sure to use the exclusive power cord.

Always use at the rated voltage and with specfic air conditioning circuit

Change installation place: If air-con need to be changed to another

place please contact the dealer, who sold you the unit.

1.Take out the conditioner and accessories from the package .

2.Choose one way from below two options on disposal of the condensed water.

Prepare unit for installation:

Generally there are two methods available on disposal of the condensed water:

Fig.1

Block the bottom plate hole of the conditioner

with rubber lid, install on theoutlet pipe fitting

back hole and let the condensing water flow from

the back hole of the conditioner. (See Fig.1 ) In

this method, the accumulated condensed water

in the bottom plate is hit by the fan onto the heat

exchanger, and evaporated and blown out

from the machine. It can cool the heat

exchanger adiator more quickly, and improve

the energy efficiency of the conditioner. But the

hitting noise by the fan at the outdoor side is

relatively large.

Method 1

Bottom plate hole

Rubber lid

Outlet pipe fitting

Fig.2

Bottom plate hole

Rubber lid

Bottom plate

Back hole

Outlet pipe fitting

Fig.3

outlet pipe fitting

If necessary the above two methods can both

have extra pipe added on the

(available on the market).

Method 2

Block the back hole of the conditioner with

If the surrounding humidity is high:

rubber lid and install to the outlet pipe fitting

bottom hole, which can make the condensed

water flow out from the bottom plate. (See Fig.2)

HW-07LM03 HW-07LM13

HW-09LM03 HW-09LM13

HW-12LM03 HW-12LM13

HW-18LM13

AMW18C13-M(T3)

TROUBLESHOOTING

If problems can not be solved please pull out power plug and contact

your dealer.

Before calling for service.

Check the following points before calling for repairs or service.

Is plug firmly inserted?

Is there power failure?

Readjust power supply

Is thermostat switch

wrongly adjusted?

Readjust the thermostat.

Is there any direct

sunlight in the room?

Use curtain or blind.

Are doors or windows

left open? Shut doors and windows.

Are there any obstacles

blocking air inlet and

outlet?

Remove the obstacles.

Is there too much heat

source in the room?

Is air filter clogged?

Clean it.

Remove the heat source

Does fuse get burned?

Phenomenon SolutionCause or check points

Replace fuse.

Switch on the machine but it

does not work immediately.

If the machine is started after stop,it will need about 3 minutes

to re-start so as to prevent the fuse from break.

Switch on the machine but it

does not work.

The cooling effect is not good.

1 1 1 1 3

HW-12LM03(T3)

HW-18LM03(T3) HW-24LM03(T3)

HW-18LM13(T3) HW-24LM13(T3)

NOTE:For some model the air conditioner is

designed to splash the condensed water on the

heat exchanger for maximun cooling efficiency,the

extra condensed water will be blown out from the

machine , But the hitting noise by the fan at the

outdoor side is relatively.(See Fig.3)

HW-09LMA03 HW-12LMA03

HW-09LMA03

HW-12LM03(T3)

Produkt Specifikationer

Mærke:	Haier
Kategori:	Aircondition
Model:	HW-07LM13

Har du brug for hjælp?

Hvis du har brug for hjælp til Haier HW-07LM13 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Aircondition Haier Manualer

Haier QS12WB1BEA Manual

26 Februar 2025

Haier QS12WB2BEA Manual

26 Februar 2025

Haier JA-18Y Manual

7 Februar 2025

Haier HSU-18HIPEQW01 Manual

14 Januar 2025

Haier HSU-24HIPEQW02 Manual

14 Januar 2025

5 Januar 2025

4 Januar 2025

4 Januar 2025

4 Januar 2025

Haier HPFD12XHP Manual

4 Januar 2025

Aircondition Manualer

Nyeste Aircondition Manualer

Eurom AC4201 Manual

6 Juli 2025

Eurom AC5201 Manual

5 Juli 2025

Eurom Airflow LED Cordless Manual

13 Juni 2025

Daikin FXNQ63A2VEB Manual

9 April 2025

Daikin FXNQ20A2VEB Manual

9 April 2025

Frigidaire GHWW125TE1 Manual

9 April 2025

Frigidaire GHWW105TE1 Manual

9 April 2025

Frigidaire FHPH142AA1 Manual

9 April 2025

Frigidaire GHPC142AA1 Manual

9 April 2025

Frigidaire GHPH142AA1 Manual

9 April 2025