Haier Inverter Expert-24K Manual

Haier Klimaanlæg Inverter Expert-24K

Læs gratis den danske manual til Haier Inverter Expert-24K (9 sider) i kategorien Klimaanlæg. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Haier Inverter Expert-24K, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/9

Please read this operation manual before using the air conditioner.

Keep this operation manual for future reference.

SPLIT TYPE ROOM AIR CONDITIONER

OPERATION MANUAL

Contents

Do not start or stop the

operation by disconnecting

the power supply cord and

so on.

Do not install in the place where there is any possibility of inflammable

steam.

Cautions

WARNING

Please call Sales/Service Shop for the Installation.

Do not attempt to install the air conditioner by yourself because improper works may cause electric shock, fire,

water leakage.

Connect the earth cable.

earthing

WARNING

When abnormality such as burnt-small

found,immediately stop the operation

button and contact sales shop.

OFF

Use an exclusive

power source with a

circuit breaker

STRICT

ENFORCEMENT

Connect power supply cord to the

outlet completely

Use the proper voltage Do not use power supply

cord in a bundle.

Take care not to damage the

power supply cord. 1.Do not use power supply cord extended or connected in halfway

STRICT

ENFORCEMENT

STRICT

ENFORCEMENT

PROHIBITION

Do not channel the air

flow directly at people,

especially at infants or

the aged.

Do not try to repair or

reconstruct by yourself.

Do not insert objects into

the air inlet or outlet.

PROHIBITION

STRICT

ENFORCEMENT

Check proper installation

of the drainage securely

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

This appliance is not intended for use by persons (inclu ding children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children without supervision.

The appliances are not intended to be operated by means of an external timer or separate remote-control system.

Keep the appliance and its cord out of reach of children less than 8 years.

PROHIBITION

The appliance shall be installed in accordance with national wiring regulations.

Means for disconnection, such as circuit breaker, which can provide full disconnection in all poles, must be incorporated in the fixed wiring in accordance with the wiring rules.

Details of type and rating of fuses, or rating of circuit breakers / ELB is detailed in below part.

The method of connection of the appliance to the electrical supply and interconnection of separate components is detailed in below part. The wiring diagram with a clearindication

of the connections and wiring to external control devices and supply cord is detailed in below part. The size and type of the cord is detailed in below part.

The information of dimensions of the space necessary for correct installation of the appliance including the minimum permissible distances to adjacent structures is detailed in

below part.

Instructions on addition charging of refrigerants are detailed in below part.

If the device has UV lamp function, please read the following contents.

Read the maintenance instructions before opening the appliance.

Eye or skin irrutation may result from exposure from top air inlet and inner part. During air filter taking and putting for maintenance,please make sure that the power is cut off

before approaching the product.

UV-C barriers bearing the ultraviolet radiaation hazard symbol should not be removed.

Appliances that are obviously damaged must not be operated.

Do not operate UV-C lamps outside of the appliance.

The appliance must be disconnected from the power supply before replacing or cleaning or other maintenance of the UV-C lamp.

The type of UV-C lamp is 0011012908 or 0011012908A.

Front panels bearing the ultraviolet radiaation hazard symbol which have UV-C radiation are provided with a hall switch to interrupt the power to the UV-C lamps for your safty.

Do not over-ride hall switch by magnet and other similar material.

Before opening front panels bearing the ultraviolet radiation hazard symbol for the conducting user maintenance,it is recommended to disconnect the power.

If the UV-C lamp is damaged,it must be replaced by the manufacturer,its service agent or similarly qualifield persons in order to avoid a hazard.

Unintended use of the appliance or damaged to the housing may result in the escape of dangerous UV-C radiation. UV-C radiation may,even in small doses,cause harm to

the eyes and skin.