Haier XI 6C4S3FSB Manual
Haier
Ikke kategoriseret
XI 6C4S3FSB
Læs gratis den danske manual til Haier XI 6C4S3FSB (52 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Haier XI 6C4S3FSB, eller vil du spørge andre brugere om produktet?
Side 1/52

User manual
EN

2
Thank you for choosing this product.
We are proud to offer the ideal product for
you and the best complete range of home
appliances for your daily routine.
Carefully read this manual for correct and
safe appliance use and for helpful tips on
efficient maintenance.
Only use the dish washer
after
carefully reading these instructions. We
recommend you always keep this manual
to hand and in good condition for any
future
owner.
Please check that the appliance is
delivered with this instruction manual, the
warranty certificate, the service centre
address and the energy efficiency label.
Each product is identified by a unique 16-
digit code, also called the “serial number”,
printed on the warranty
certificate or on
the serial plate found inside the door, on
the upper right hand side. This code is a
sort of product
-
specific ID card that you
will need to use to register the product or
if you need to contact the Technical
Assistance Centre.
Fig. A
1.
GENERAL SAFETY RULES
2.
WATER CONNECTION
3.
LOADING THE SALT
4.
ADJUSTING THE UPPER BASKET
(ONLY ON SOME MODELS)
5.
LOADING DISHES
6.
INFORMATION FOR TEST
LABORATORIES
7.
LOADING THE DETERGENT
8.
TYPES OF DETERGENT
9.
LOADING THE RINSE AID
10.
CLEANING THE FILTERS
11.
PRACTICAL HINTS
12.
CLEANING AND MAINTENANCE
13.
DESCRIPTION OF THE CONTROL
PANEL
14.
TECHNICAL DATA
15.
PROGRAMME SELECTION AND
SPECIAL FEATURES
16.
REMOTE CONTROL (Wi-Fi)
17.
PROGRAMME LEGEND
18.
WATER SOFTENER UNIT
19.
TROUBLESHOOTING AND WARRANTY
20.
ENVIRONMENTAL CONDITIONS
Contents

3
EN
1. GENERAL SAFETY
RULES
This appliances is intended to
be used in household and
similar applications such as:
− Staff kitchen areas in
shops, offices and other
working environments;
− Farm houses;
− By clients in hotels, motels
and other residential type
environments;
− Bed and breakfast type
environments.
A different use of this appliance
from household environment
or from typical housekeeping
functions, as commercial use by
expert or trained users, is excluded
even in the above applications. If
the appliance is used in a manner
inconsistent with this it may reduce
the life of the appliance and may
void the manufacturer’s warranty.
Any damage to the appliance or
other damage or loss arising
through use that is not consistent
with domestic or household use
(even if located in a domestic or
household environment) shall not
be accepted by the manufacturer to
the fullest extent permitted by law.
for EU market
The appliance can be used by
those aged 8 or over and by
those with limited physical,
sensorial or mental capacities,
without experience or knowledge
of the product, only if supervised
or provided with instruction as
to the operation of the appliance,
in a safe way with awareness
of the possible risks.
for Extra EU markets
This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use of
the appliance by a person
responsible for their safety.
Children should be supervised
to ensure that they do not play
with the appliance.
Children of aged 3 and under
should be kept away unless
continuously supervised.
If the supply cord is damaged,
it must be replaced by a
Special cord or assembly
available from the manufactured
or its service agent.
Only use the hose-sets
supplied with the appliance for
the water supply connection
(do not reuse old hose-sets).

4
Water pressure must be
between 0.08 MPa and 1 MPa.
Make sure carpets or rugs do
not obstruct the base or any of
the ventilation openings.
After installation, the appliance
must be positioned so that the
plug is accessible.
Do not leave the door open in
a horizontal position, in order
to avoid potential dangers (e.g.
tripping).
For further information on the
product or to consult the technical
data sheet, please refer to the
manufacturer's website.
For the maximum number of
place settings, see the relevant
data plate attached to the product
.
The technical details (supply voltage
and power input) are indicated
on the product rating plate.
Make sure that the electrical
system is earthed and complies
with all applicable laws, and
that the socket is compatible
with the plug of the appliance.
The manufacturer declines all
responsibility for any damage
to people or property due to
non-earthing of the machine.
Ensure that the dishwasher
does not crush power cables.
In general it is not advisable to
use adaptors, multiple plugs
and/or extension cables.
Before cleaning or maintaining
the dishwasher, unplug the
appliance and turn off the
water supply.
Do not pull on the power cord
or appliance to unplug the
machine.
WARNING:
Water may reach very high
temperatures during the
wash cycle.
WARNING:
The appliance must not be
supplied through an external
switching device, such as a
timer, or connected to a circuit
that is regularly switched on
and off by a utility.
Electrical connections and
safety instructions

5
EN
Do not leave the appliance
exposed to the elements (rain,
sun, etc.).
Leaning or sitting on the open
door of the dishwasher could
cause it to tip over.
When moving, do not lift the
dishwasher by the door; during
the transport, never lean the
door on the trolley. We
recommend two people lift the
machine.
The dishwasher is designed for
normal kitchen utensils. Objects
that have been contamined by
petrol, paint, traces of steel or
iron, corrosive chemicals, acids
or alkalis must not be washed in
the dishwasher.
If there is a water softening
device installed in the home
there is no need to add salt to
the water softener fitted in the
dishwasher.
If the appliance breaks down or
stops working properly, switch it
off, turn off the water supply and
do not tamper with it. Repair work
should only be carried out by an
approved service agent and only
genuine spare parts should be
fitted. Any failure to follow the
above advice may have serious
consequences for the safety of
the appliance.
If you need to move the
machine after removing the
packaging, do not try to lift it by
the bottom of the door. Open
the door slightly and lift the
machine by holding it on the top.
By marking this product,
we confirm, under our own
responsibility, full compliance
of this product with all
relevant safety, health and
environmental requirements
under European legislation.
Remove all elements of the
packaging.
Do not install or use the
dishwasher if it is damaged.
WARNING:
Keep packaging materials
away from children.
Installation
WARNING:
Knives and other utensils
with sharp points must be
loaded in the basket with
their points down or placed
in a horizontal position.

6
Follow the instructions supplied
with the product.
In case of breakage, the hose
must be replaced with an
original spare part available
from the manufacturer or its
service center.
WARNING:
Use only the inlet hose
supplied with the appliance
for connection to the water
mains. Old inlet hoses must
not be reused.
Replacement of the inlet hose
WARNING:
Ensure that the product,
before being switched on for
the first time, is installed in a
horizontal position by way of
the adjustable feet.
Check the horizontal position
using a spirit level
WARNING:
(only freestanding models)
If it is necessary to remove
the worktop to install the
dishwasher in a compartment
of a modular kitchen, please
contact our Authorized
Technical Assistance Centres.
WARNING:
(only built-
in and half
integrated models)
Do not connect the dishwasher
to the mains supply until the
front panel has been fully
installed. Otherwise, the risk
of an electrical hazard
may
persist.
WARNING:
(only built in and semi- -
integrated models)
Do not connect the dishwasher
to the mains supply until all
installation operations have
been performed according
to the "TECHNICAL NOTES
FOR INSTALLATION" supplied
with the product.

7
EN
2. WATER CONNECTION
The inlet and drain hoses can be directed
to left or right.
Water pressure must be between 0,08
MPa and 1 MPa.
The inlet hose must be connected to a tap
so that the water supply can be cut off
when the machine is not in use (fig.1).
The dishwasher is fitted with 3/4" threaded
connector (fig.2).
Connect inlet hose to water tap "A"
"B"
with a 3/4" attachment making sure that it
has been properly tightened.
If it is necessary, the inlet pipe can be
lengthened up to 2,5 m. The extension
pipe is available from the After Sales
Service Centre.
If the dishwasher is connected to new
pipes or to pipes which have not been
inuse for a long time run water through for
a few minutes before connecting the inlet
hose. In this way no deposits of sand or
rust will clog up the water inflow filter.
The dishwasher can be connected to
either cold or hot water, as long as it
is no hotter than 60°C.
The appliance must be connected to
the water mains using new hose-
sets.
The old hose-
sets should not be
reused.

8
SOME MODELS
may include one or more
of the following features:
WATERBLOCK (fig.3)
The waterblock system has been designed
to
improve the safety of your appliance. The
system prevents flooding which might be
caused by a machine malfunction or as a
result of a fracture on the rubber pipes
and in particular on the water supply pipe.
How it works
A sump located on the base of the appliance
collects any possible water leakage and
operates a sensor which activates a valve
placed under the water tap and blocks any
water, even with the tap fully opened.
If
box "A"
containing the electrical parts is
damaged, remove the plug from the socket
immediately. To ensure perfect operation of
the safety system, the hose with box "A"
should be connected to the tap as shown in
the
figure
. The water supply hose should
not
be cut, as it contains live parts. If the
hose is not long enough for correct
connection, it must be replaced with a longer
one. The hose can be obtained from the
Technical Assistance Centre.
AQUASTOP (fig.4):
A device located on the supply tube that
stops water flow if the tube deteriorates;
in this case, a red mark will appear in the
window "B"
and the tube must be
replaced. To unscrew the nut, press the
one- . way lock device "C"
All the dishwashers are equipped with
an overflow safety device which, if
water exceeds normal levels due to
malfunctions, automatically blocks
water flow and/or drains excess
quantities.
Hydraulic safety devices

9
EN
The outlet hose should disharge into a
standpipe, making sure that there are no
kinks . (fig.5)
The standpipe must be at least 40 cm
above floor level and it must have an
internal diameter of at least 4 cm.
It is advisable to fit an anti-
odour air trap
(fig.5X)
. If necessary the outlet hose can
be extended up to 2,5 m, provided that it
is kept at a maximum height of 85 cm
above floor level. The extension pipe is
available from the After Sales Service
Centre.
The hose can be hooked over the side of
the sink, but it must not be immersed in
water, in order to prevent water from
being syphoned back to the machine
when this is in operation (fig.5Y).
When installing the appliance under a
worktop the hose pipe clamp must be
attached to the wall in the highest
possible position under the worktop
(fig.5Z).
Check that there are no kinks in the inlet
and outlet hoses.
Connecting the outlet hose

10
3. LOADING THE SALT
(Fig. A "1")
The appearance of white stains on dishes
is generally a warning sign that the salt
container needs filling.
On the bottom of the machine there is a
container for the salt for regenerating the
softener.
It is important to use only a salt that is
specifically designed for dishwasher.
Other types of salt contain small
quantities of insoluble particles which
over a long period of time may affect and
deteriorate the softener performance.
To add salt, unscrew the cap of the
container on the bottom and then refill the
container.
During this operation a little water will
overflow; but keep adding salt until the
container is full. When the container is
full, clean the thread of salt residue and
retighten the tap.
After loading the salt, it is recommended
running a complete washing cycle, or
COLD RINSE programme.
The salt dispenser has a capacity of
between 1 kg and, for efficient use of the
appliance, it should be refilled from time
to time .
(Only for first start up) When the
appliance is used for the first time,
after completely filling the salt
container, it is necessary to add water
until the container overflows.
After loading the salt, YOU MUST run
a complete washing cycle, or the
PRE-
WASH/COLD RINSE/REFRESH
programme.

11
EN
4. ADJUSTING THE UPPER
BASKET (ONLY ON SOME
MODELS)
Type "A":
1. Turn front blocks "A" outwards;
2. Remove the basket and remount it in
the upper position;
3. Replace blocks "A" in the original
position.
Following this operation, the movable
supports cannot be used in the upper
position.
Type "A"
Type "B":
(ONLY MODELS WITH EASY CLICK)
The upper basket is equipped with a height
adjustment system.
To lift it: lift the basket holding it by the
sides, as soon as it is in a raised position,
let it go without applying any pressure to the
levers.
To lower it: hold the basket by the sides,
press the two levers on the sides of the B
basket, and lower it.
WARNING:
Never raise or lower the basket by
working on one side only.
WARNING:
Always accompany the basket during
its descent into the stop position.
WARNING:
We recommend adjusting the basket
before loading the dishes.
During the first start-up, the upper
basket may be in the upper or lower
position. Place the basket in the upper
or lower position, as appropriate for
the requirements of the load,
following the instructions provided.

12
5. LOADING DISHES
Cup Holder
(only on some models)
The upper basket (fig. 1) is equipped with
movable supports hooked to the side panel.
They can either be placed in the open
position (A) to place tea cups, coffee, long
knives and ladles. or in the lowered position
(B) to have more space in the upper basket.
G -oblet shaped glasses can be hung on
the ends of the supports themselves
(fig.2).
Using the upper basket
The upper basket has been designed to
offer maximum flexibility of use. It can be
loaded with dessert plates, cups and
glasses, which it is advisable to lock to
avoid them being overturned the jets.
Position the larger plates, slightly inclined
towards the front in order to facilitate the
easy insertion of the basket inside the
machine.
A standard daily load is represented in fig.3
"Maxi Ladle"-
(only on some models)
This accessory (fig.4), has been designed
to provide the optimal washing position for
all long kitchen objects or tools such as
bread knives, ladles, and forks.
WARNING:
After loading the basket make sure
that the spray arm rotates freely
without hitting dishes or kitchen
utensils.
Using the upper basket

13
EN
" " CRYSTAL PROTECT
(only on some models)
CRYSTAL PROTECT, a Specific set of
accessories for taking care of the most
precious and delicate items like crystals,
pottery, wine glasses and more:
Dedicated double support (left & right)
applied on the upper basket, separated
from cup holders, designed with a rubber
surface for protecting the touching points.
Moreover, a double set of rubber protection
carpets are placed in the floor space where
the glasses are in contact with the basket
for the maximum care ever.
The lower basket houses pots, pans,
tureens, salad bowls, lids, serving plates,
dinner plates, and soup plates.
The cutlery should be placed, handle
facing down, in the special plastic
container positioned in the lower basket
(fig.10-11) making sure that the cutlery
itself does not prevent the rotation of the
spray arm or the opening of the detergent
compartment.
Foldable racks
(only on some models)
In the lower basket , there may be (fig.6)
some adjustable combs (C-D-E depending
on the model) useful to guarantee optimum
stability for the dishes.
Non-standard size or shaped dishes or
plates can be raised/lowered (fig.7 and
fig.8) to ensure maximum loading flexibility.
A standard daily load is represented in
fig.9.
Using the lower basket

14
The rational and correct arrangement of the
dishes is an essential condition for a good
washing result.
The cutlery basket is intended to contain
cutlery of all kinds, excluding those of such
length as to interfere with the upper
sprinkler. The cutlery must be placed in the
appropriate spaces of the upper grids to
allow for optimal water passage. It is possible
to remove the upper grids by lifting them
and sliding them inside their seat (fig.10).
You can adjust the height of the cutlery basket
handle by pulling or pushing the handle
(fig.11)
.
An example of the positioning of the Cutlery
rack is shown in figure 9.
Use the third basket to load the cutlery, as
shown in the image (fig.12).
Load the knives with the cutting side facing
downwards.
If necessary, the side shelves of the third
basket can be slid or removed (fig.13-14) in
order to create additional space in the
upper basket for bulky items such as
crystals.
USING THE THIRD BASKET
(only on some models)
WARNING:
Knives
and other utensils with sharp
points must be loaded in the basket
with their points facing down or placed
in a horizontal position.
CUTLERY BASKET
(only on some models)

15
EN
In some programmes (see table of
programmes), the third washing arm,
positioned at the bottom of the dishwasher
POWER WASH, will also be enabled.
This feature is ideal when cleaning heavily
soiled tableware or cookware, placing them
directly in the area of the basket above the
POWER WASH arm (fig.15).
6. INFORMATION FOR
TEST LABORATORIES
Please ask information required for
comparison testing and measuring noise
levels, according to EN normative, to the
following address:
testinfo- dishwasher@candy.it
In the request, please specify model name
and number of the dishwasher (see rating
plate).
POWER WASH (only on some
models)

17
EN
In programmes that have a pre-wash cycle
that requires an additional dose of
detergent (see the washing programmes
chapter), the additional detergent must be
poured into the appropriate location (C).
Loading pre wash detergent in -
programmes that require it

19
EN
9. LOADING THE RINSE AID
(Fig. A "3")
Rinse aid, which is automatically released
during the last rinsing cycle, helps the
dishes to dry quickly and prevents spots
and stains forming.
The rinse aid container is next to the
detergent container (fig.A "3").
To open, press the tab on the lid of the
rinse aid dispenser and lift it.
Add rinse aid up to the Max. indication.
If the rinse aid spills out, remove it from
the wash tank.
Spilled rinse aid can cause excessive
frothing during the wash cycle.
Close the lid of the rinse aid dispenser.
The lid clicks into the locking position.
Always use rinse additives that are suitable
for automatic dishwashers.
Models equipped with display or
rinse aid indicator (only on some
models)
When it becomes necessary to fill the rinse
aid container, the display will indicate the
lack of rinse aid (in models with display), or
the designated indicator light on the
dashboard will turn on.
Adjusting the amount of rinse aid
1. Switch the appliance on, press
ON/OFF" button.
2. Hold the "SETTINGS (5Sec.)"
button, a short beep will sound.
3.The "SETTINGS" message appears on
the display.
4. Press the "PROGRAMME SELECTION"
buttons to navigate the
submenu.
5. Choose the "RINSE AID" option.
6. Press "START/RESET" to access
the regulation levels.
7.
Press "PROGRAMME SELECTION"
to choose the value (R1......R6).
With level R0, no rinse aid is dispensed.
8.Press "START/RESET" to confirm.
9. Press "ON/OFF" to confirm.
ALWAYS start the procedure with the
dishwasher turned off.
This has been factory set to level 4, as -
this satisfies the majority of users.
Filling the rinse aid container
Rinse aid
Produkt Specifikationer
Mærke: | Haier |
Kategori: | Ikke kategoriseret |
Model: | XI 6C4S3FSB |
Vekselstrømsindgangsspænding: | 220-240 V |
Vekselstrømsindgangsfrekvens: | 50 Hz |
Bredde: | 597 mm |
Dybde: | 555 mm |
Højde: | 898 mm |
Vægt: | 43000 g |
Kontroltype: | Berøring |
Indbygget skærm: | Ja |
Strøm: | 10 A |
Pakkevægt: | 44850 g |
Pakkedybde: | 676 mm |
Pakkebredde: | 640 mm |
Pakkehøjde: | 896 mm |
Bluetooth: | Ja |
Placering af apparat: | Fuldt indbygget |
Indvendig belysning: | Ja |
Inverter-teknologi: | Ja |
Støjniveau: | 44 dB |
Antal vaskeprogrammer: | 10 |
Forsinket start-timer: | Ja |
Justerbare fødder: | Ja |
Dør farve: | Ikke anvendelig |
Indikator for LED-programfase: | Ja |
Vandforbrug pr. cyklus: | 9.5 L |
Bestik rum type: | Skuffe |
Farve på kontrolpanel: | Sort |
Antal kuverter: | 16 kuverter |
Cyklustid: | 238 min. |
Forsinket start (maks.): | 23 t |
Opvaskeprogrammer: | Eco, Intensive, Pre-wash, Quick, Universal |
Halv belastning: | Ja |
Indikator for afspændingsmiddel: | Ja |
Energiforbrug pr. cyklus: | 0.76 kWh |
Energieffektivitetsskala: | A til G |
AquaSensor funktion: | Ingen |
AquaStop funktion: | Ja |
Indikator for resterende tid: | Ja |
Produktstørrelse: | Fuld størrelse (60 cm) |
Wi-Fi kontrolleret: | Ja |
Overløbsbeskyttelse: | Ja |
Støjemissionsklasse: | B |
Energieffektivitetsklasse: | C |
Energiforbrug pr. 100 cyklusser: | 76 kWh |
Brugerdefineret panel klar: | Ja |
Temperatur (maks): | - °C |
Cyklustid (hurtigt vaskeprogram): | 20 min. |
Saltindikator: | Ja |
Øverste kurv indstillelig højde: | Ja |
Doseringsassistent: | Ingen |
Selvrensende filter: | Ja |
Antal kurve: | 3 kurv(e) |
Automatisk belastningsgenkendelse: | Ja |
Højde under bordplade: | 818 mm |
Automatisk døråbning: | Ja |
Kundespecificeret panelvægt (min.): | 2000 g |
Kundespecificeret panelvægt (maks.): | 9000 g |
Ready-indikator: | Ja |
Gulvindikatorlys: | Ja |
Kontrol apps understøttes: | hOn |
Garantiperiode: | 2 År |
Startforsinkelse (min): | 1 t |
Har du brug for hjælp?
Hvis du har brug for hjælp til Haier XI 6C4S3FSB stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Haier Manualer
26 Juli 2025
26 Juli 2025
22 Juli 2025
8 Juli 2025
8 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
7 Juli 2025
27 Juni 2025
Ikke kategoriseret Manualer
- Scancool
- Tech.Inc
- Paw Patrol
- Omnitron Systems
- LawnMaster
- Louis Tellier
- Bricasti Design
- Portech
- ComNet
- Nabo
- Osprey
- Melinera
- We-Vibe
- Blue Lantern
- Kurgo
Nyeste Ikke kategoriseret Manualer
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025