
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
For operation, location and safety information,
please refer to the Installation & Operating Manual.
Form No. FTBR, FTBX Spec Sheet Page 1 of 3 May 2019
The Hatco Remote Drop-In Frost Top keeps pre-chilled
beverages, snacks, hors d’oeuvres and side dishes cool
and ready to serve, but in remote congurations that offer
exibility for your particular kitchen design needs. Also
available in a Slim Line Series, providing wider access to
your customer, regardless of the sneeze guards.
• R-513A refrigerant available for California only. Please
contact Hatco for more information
• Available in 1-, 2 and 3-pan models as well, as 2- and 3-pan
• Accommodates full-size and half-size sheet pans
• NSF 7 approved cold wall construction utilizes a refrigerant that
keeps food product cold without drying it out
• Auto-defrost is activated through an advanced electronic
controller programmed at the customer location
• 1" NPT brass drain simplies cleaning (excluding FTBR-1
• Matches the Hatco line of Heated Wells for an integrated look
– Include a condensing unit (shipped loose, can be eld
mounted up to 50 feet [15.24 meters] of tubing from unit) and
a control panel (shipped loose - probe wires are 9 feet
[2.7 meters]) for installing in more convenient or
– Include a control panel (shipped loose - probe wires are
9 feet [2.7 meters mm]) but shipped without a condensing
unit for the increased exibility of multiple
(available at time of purchase only)
Additional Four-Year Parts Only Warranty on Compressor (FTBR only)
(not available for export voltages)
Half-Size Pan (18"W x 13"D [457 x 330 mm])
Full-Size Pan (18"W x 26"D [457 x 660 mm])
Remote Drop-In Frost Tops
Models: FTBR-1, -2, -3, -S2, -S3
Remote models consist of these