Hazet 9040T-1 Manual

Hazet Varmepistol 9040T-1

Læs gratis den danske manual til Hazet 9040T-1 (4 sider) i kategorien Varmepistol. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Hazet 9040T-1, eller vil du spørge andre brugere om produktet?

Side 1/4
AH 9040T-1 BA I
9040T-1
Ursprungssprache deutsch
Sicherheitshinweise
Gehörschutz tragen.
Gesichtsmaske oder Atemschutz tragen.
Enganliegende Arbeitsschutzkleidung tragen.
Arbeitshandschuhe tragen.
Schutzbrille tragen.
Verwenden Sie
Dichtband bei
der Montage des
Luftanschlussnippels!
Richten Sie die Turbo-Ausblaspistole niemals
gegen sich, Ihre Mitmenschen oder Tiere!
Bestimmungsgemäße Verwendung.
Die Turbo-Ausblaspistole ist zum Reinigen und Ausblasen von Gegen-
ständen und schwerzugänglichen Stellen bestimmt. Jegliche darüber
hinausgehende Verwendungen oder eigenmächtige Veränderungen
können Gefahren auslösen und gelten als nicht bestimmungsgemäß. r
Schäden, die aus nicht bestimmungsgemäßer Verwendung resultieren,
haftet der Betreiber.
Technische Daten:
15!
X
mm
l/min.
max.
Druck
(bar)
Betriebs-
druck
(bar)
N
dB(A)
ß
m/s2
mm
9040T-1
12.91(
1
4
˝) – 7.2
163 10 80 12 6,3 148Lp A 91 Lp W 102 < 0,41
Anwendungshinweis
Turbo-
Ausblaspistole
Anweisungen:
1. Verbinden Sie die Druckluftkupplung der
Turbo-Ausblaspistole mit dem Druckluft-
schlauch des Kompressors.
2. Beim Betätigen des Auslösers auf der
Oberseite wird Druckluft über die Düse
ausgeblasen.
3.
Ändern Sie den Abstand zur Oberfläche je nach
Luftdruck und schwere der Verschmutzung.
Lieferumfang
9040T-1, Turbo-Ausblaspistole, Anwendungshinweis
Wartung
Trennen Sie vor Wartungsarbeiten die Druck-
luftversorgung von der Turbo-Ausblaspistole!
• Schrauben Sie die Düse vom Gehäuse ab und
reinigen Sie diese mit einem feuchten Tuch.
• Ölen Sie den Auslösemechanismus mit
Pneumatik Spezial-Öl (9400-100) für
Druckluftwerkzeuge (Abb. 1).
• Betätigen Sie den Auslösemechanismus
mehrmals um das Öl zu verteilen (Abb. 2).
9040T-1
Original language: German
Application note
Turbo air blow gun
Safety notices
Wear hearing protection.
Wear a face mask or breathing protection.
Wear tight-fitting protective clothing.
Wear working gloves.
Wear eye protection.
Use sealing tape
when assembling
the air connecting
nipple!
Never point the turbo air blow gun at
yourself, other people or animals!
Proper use.
The turbo air blow gun is designed for cleaning and blowing out objects and
hard-to-reach places. Any use that goes beyond this or any unauthorised
modification may cause hazards and are considered improper use. The
operator is liable for any damage resulting from such improper use.
Included in delivery
9040T-1, turbo air blow gun, application note
Instructions:
1. Connect the compressed air coupling of the
turbo air blow gun to the compressed air
hose of the compressor.
2. Compressed air is blown out via the nozzle
when the trigger on the top is pressed.
3.
Adjust the distance to the surface depending
on the air pressure and the amount of dirt.
Maintenance
Disconnect the compressed air supply from
the turbo air blow gun before carrying out
maintenance work!
• Unscrew the nozzle from the housing
and clean it with a damp cloth.
• Oil the trigger mechanism with special
pneumatic oil (9400-100) for air tools (Fig. 1).
• Operate the trigger mechanism several times
to distribute the oil (Fig. 2).
Technical data:
15!
X
mm
l/min.
max.
pressure
(bar)
Operating
presure
(bar)
N
dB(A)
ß
m/s2
mm
9040T-1
12.91(
1
4
˝) – 7.2
163 10 80 12 6.3 148Lp A 91 Lp W 102 < 0.41


Produkt Specifikationer

Mærke: Hazet
Kategori: Varmepistol
Model: 9040T-1

Har du brug for hjælp?

Hvis du har brug for hjælp til Hazet 9040T-1 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Varmepistol Hazet Manualer

Hazet

Hazet 9043N-10 Manual

16 August 2024
Hazet

Hazet 1990-2/6 Manual

11 August 2024
Hazet

Hazet 1990-1/3 Manual

20 Juli 2024
Hazet

Hazet 9040T-1 Manual

17 Juni 2024

Varmepistol Manualer

Nyeste Varmepistol Manualer