IMPORTANT
Read and follow the instructions in this user manual even if you feel you are familiar with the product and find a place
to keep it handy for future reference.
For your convenience record the complete model number (located on the product identification plate) and the date
you received the product, together with your purchase receipt and attach to the warranty and service information.
Retain in the event that warranty service is required.
NOTE: The rating of this product (as marked on the product identification plate) is based on specific loading tests.
Normal use or the use of other recommended attachments may draw significantly less power.
INTENDED USE
The product is intended for indoor use only. This product is only suitable for well insulated spaces or occasional use.
Any modification of the product may have consequences for safety, warranty and proper functioning.
SPECIFICATIONS
SAFETY INSTRUCTIONS
WARNING: Only use the product as described in this manual.
•Only use the product as described in this manual.
•Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
•This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
•Disconnect the product from the electrical outlet and other equipment if problems occur.
•Do not drop the product and avoid bumping.
•Close supervision is necessary when the product is used by or near children, animals or infirm persons. Do not
allow children to play with it or touch it.
•Do not use the product where splashing of water might occur, e.g. bathroom, swimming pool or close to a
washbowl.
•Do not use the product in rooms where flammable liquids or gases are used or stored. Do not use the product•
in dusty environments.
•Place the product on a stable and flat surface.
•Make sure that the electrical supply in your area matches a voltage of 220 – 240 VAC and a frequency of 50 Hz.
•Keep away heat-deformable, discolouring or deteriorating products.
•Avoid direct sunlight.
•Make sure that no other high current appliances are plugged into the same circuit with your product. Overloading
may occur.
•Do not place near other heat sources.
