Hikoki C10FSHC Manual

Hikoki Sav C10FSHC

Læs gratis den danske manual til Hikoki C10FSHC (125 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Hikoki C10FSHC, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/125
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
Model
Modèle
Modelo C 10FSHC
(Laser Marker Equipment)
(Outil avec marqueur à laser)
(Equipo marcador láser)
Slide Compound Miter Saw
Scie a coupe d’onglet radiale
Tronzadora radial abatible
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand
this manual before operating the power tool. Please keep this manual available for other users
and owners before they use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort
ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent l’outil
motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar en
lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda
este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan
leerlo otras personas antes de utilizar la herramienta eléctrica. Este manual debe ser guardado
en un lugar seguro.
2
English
IMPORTANT SAFETY INFORMATION
Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before
operating or maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the failure to observe
basic safety rules or precautions. An accident can often be avoided by recognizing a potentially hazardous
situation before it occurs, and by observing appropriate safety procedures.
Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual and in the sections
which contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identifi ed by WARNINGS on the
power tool and in this Instruction Manual.
NEVER use this power tool in a manner that has not been specifi cally recommended by HITACHI.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or
may cause machine damage.
NOTE emphasizes essential information.
MEANINGS OF SYMBOLS
Symbols
The following show symbols used for the machine. Be sure that you understand their meaning before use.
WARNING
To reduce the risk of injury, user must read
instruction manual.
WARNING
Always wear eye protection.
CAUTION
Do not stare at operating lamp.
WARNING
Always wear hearing protection.
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING:
Read all safety warnings, instructions, illustrations and specifi cations provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.

Produkt Specifikationer

Mærke: Hikoki
Kategori: Sav
Model: C10FSHC

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikoki C10FSHC stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sav Hikoki Manualer

Hikoki

Hikoki CJ90VAST2 Manual

20 Juli 2025
Hikoki

Hikoki CR 18DA Manual

21 August 2024
Hikoki

Hikoki CR13VB Manual

22 Marts 2024
Hikoki

Hikoki C 3607DA Manual

18 Marts 2024
Hikoki

Hikoki C6 Manual

25 Februar 2024
Hikoki

Hikoki C12FDHB Manual

16 Februar 2024
Hikoki

Hikoki CJ36DB Manual

22 Januar 2024
Hikoki

Hikoki C10FCG Manual

17 Januar 2024
Hikoki

Hikoki CR18DGL Manual

6 Januar 2024
Hikoki

Hikoki TCS33ED Manual

10 December 2023

Sav Manualer

Nyeste Sav Manualer

RYOBI

RYOBI CS-1835 Manual

31 Juli 2025
Guede

Guede KS 450-55 Manual

31 Juli 2025
RYOBI

RYOBI CS-4016 Manual

31 Juli 2025
RYOBI

RYOBI RRS1801M Manual

31 Juli 2025
Skil

Skil 3540 CA Manual

31 Juli 2025
RYOBI

RYOBI One+ RPLS18X Manual

31 Juli 2025
RYOBI

RYOBI One+ RMS18254X Manual

31 Juli 2025
RYOBI

RYOBI RTBS18X Manual

31 Juli 2025
RYOBI

RYOBI CS-2240 Manual

31 Juli 2025
RYOBI

RYOBI RTS18C Manual

31 Juli 2025