Hikoki SAY-150A Manual

Hikoki Rysteplaster SAY-150A

Læs gratis den danske manual til Hikoki SAY-150A (9 sider) i kategorien Rysteplaster. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Hikoki SAY-150A, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/9
Rotary Orbital Sander
Model SAY – 150A
Handling instructions
Note:
Before using this Electric Power Tool, carefully read through these
HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is
recommended that these INSTRUCTIONS be kept readily available
as an important reference when using this power tool.
2
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust.
Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating
a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded)
power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving
parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common
sense when operating a power tool.
Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection.
Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch
or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before turning
the power tool on.
A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance
at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection can reduce dust related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and infirm persons away.
When not in use, tools should be stored out of reach of children and
infirm persons.

Produkt Specifikationer

Mærke: Hikoki
Kategori: Rysteplaster
Model: SAY-150A

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikoki SAY-150A stil et spørgsmål nedenfor, og andre brugere vil svare dig


Rysteplaster Hikoki Manualer

Hikoki

Hikoki LDU4 Manual

5 August 2025
Hikoki

Hikoki GP5V Manual

4 August 2025
Hikoki

Hikoki FSV 10SA Manual

27 August 2023
Hikoki

Hikoki SAY-150A Manual

24 August 2023
Hikoki

Hikoki SB3608DA Manual

9 Juli 2023
Hikoki

Hikoki S18SB Manual

20 Marts 2023
Hikoki

Hikoki SV 1813DA Manual

14 Marts 2023
Hikoki

Hikoki SV 12SG Manual

26 December 2022
Hikoki

Hikoki SB8V2 Manual

8 December 2022
Hikoki

Hikoki SV13YST Manual

8 November 2022

Rysteplaster Manualer

Nyeste Rysteplaster Manualer

FERM

FERM PSM1035 Manual

20 September 2025
FERM

FERM PSM1034 Manual

20 September 2025
FERM

FERM BJM1009 Manual

20 September 2025
Kellen Tools

Kellen Tools BT-RS 420 E Manual

19 September 2025
Scheppach

Scheppach BGB915 Manual

18 September 2025
Scheppach

Scheppach MRS1300 Manual

18 September 2025
Flex

Flex BBE 14-3 110 Manual

18 September 2025
Bosch

Bosch GEX 12V-150-3 Professional Manual

16 September 2025
Duro

Duro D-NTS 153 Manual

13 September 2025
Bosch

Bosch PDA 240 E Manual

10 September 2025