Hikvision DS-2CE78K0T-LFS Manual
Hikvision
Overvågningskamera
DS-2CE78K0T-LFS
Læs gratis den danske manual til Hikvision DS-2CE78K0T-LFS (19 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Hikvision DS-2CE78K0T-LFS, eller vil du spørge andre brugere om produktet?
Side 1/19
Smart Hybrid Light Bullet & Turret
Camera
User Manual
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual applies to the models below:
Type
Model
Type I Camera
DS- -2CE16K0T LFS
DS- -2CE16K0T LPFS
DS- - 2CE16D0T LFS
DS- -2CE16D0T LPFS
Type CameraII
DS- -2CE17K0T LFS
DS- - 2CE17D0T LFS
Type I CameraII
DS- -2CE76K0T LMFS
DS- -2CE76D0T LMFS
Type CameraIV
DS- -2CE76K0T LPFS
DS- -2CE76D0T LPFS
Type V Camera
DS- -2CE78K0T LFS
DS- - 2CE78D0T LFS
This manual may contain several technical mistakes or
printing errors, and the content is subject to change
without noce. The updates will be added to the new
version of this manual. We will readily improve or
update the products or procedures described in the
manual.
010 000 20230322
Iniaves on the Use of Video Products
Thank you for choosing Hikvision products.
Technology aects every aspect of our life. As a
high tech company, we are increasingly aware of the -
role technology plays in improving business efciency
and quality of life, but at the same me, the potenal
harm of its improper usage. For example, video
products are capable of recording real, complete and
clear images. This provides a high value in retrospect
and preserving real me facts. However, it may also -
result in the infringement of a third party’s legimate
rights and interests if improper distribuon, use and/or
processing of video data takes place. With the
philosophy of “Technology for the Good”, Hikvision
requests that every end user of video technology and
video products shall comply with all the applicable laws
and regulaons, as well as ethical customs, aiming to
jointly create a better community.
Please read the following initiaves carefully:
1. Everyone has a reasonable expectaon of privacy,
and the installaon of video products should not
be in conict with this reasonable expectaon.
Therefore, a warning noce shall be given in a
reasonable and eecve manner and clarify the
monitoring range, when installing video products
in public areas. For non public areas, a third -
party’s rights and interests shall be evaluated
when installing video products, including but not
limited to, installing video products only aer
obtaining the consent of the stakeholders, and
not installing highly invisible video products.-
2. The purpose of video products is to record real
acvies within a specic me and space and
under specic condions. Therefore, every user
shall rst reasonably dene his/her own rights in
such specic scope, in order to avoid infringing
on a third party’s portraits, privacy or other
legimate rights.
3. During the use of video products, video image
data derived from real scenes will connue to be
generated, including a large amount of biological
data (such as facial images), and the data could
be further applied or reprocessed. Video
products themselves could not disnguish good
from bad regarding how to use the data based
solely on the images captured by the video
products. The result of data usage depends on
the method and purpose of use of the data
controllers. Therefore, data controllers shall not
only comply with all the applicable laws and
regulaons and other normave requirements,
but also respect internaonal norms, social
morality, good morals, common pracces and
other non mandatory requirements, and respect -
individual privacy, portrait and other rights and
interests.
4. The rights, values and other demands of various
stakeholders should always be considered when
processing video data that is connuously
generated by video products. In this regard,
product security and data security are extremely
crucial. Therefore, every end user and data
controller, shall undertake all reasonable and
necessary measures to ensure data security and
avoid data leakage, improper disclosure and
improper use, including but not limited to,
seing up access control, selecng a suitable
network environment (the Internet or Intranet)
where video products are connected,
© 2022 Hangzhou Hikvision Digital Technology Co., Ltd.
All rights reserved.
About this Manual
The Manual includes instrucons for using and
managing the Product. Pictures, charts, images and all
other informaon hereina are for descripon and er
explanaon only. The informaon contained in the
Manual is subject to change, without noce, due to
rmware updates or other reasons. Please find the
latest version of this Manual at the Hikvision website
(https://www.hikvision.com/).
Please use this Manual with the guidance and
assistance of professionals trained in supporting the
Product.
Trademarks
and other Hikvision’s trademarks and
logos are the properes of Hikvision in various
jurisdicons.
Other trademarks and logos menoned are the
properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW, THIS MANUAL AND THE PRODUCT DESCRIBED,
WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE
PROVIDED “AS IS AND “WITH ALL FAULTS AND ”
ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS
FOR A PARTICULAR PURPOSE. THE USE OF THE
PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS
OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE
USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE
INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES
FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER ATTACK, -
HACKER ATTACK, VIRUS INFECTION, OR OTHER
INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE
WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY
RESPONSIBLE FOR ENSURING THAT YOUR USE
CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU
ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A
MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF
THIRD PARTIES, INCLUDING WITHOUT LIMITATION,
RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS,
OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END USES, INCLUDING THE DEVELOPMENT -
OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION,
THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR
BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE
CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR
UNSAFE NUCLEAR FUEL CYCLE, OR IN SUPPORT OF -
HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS
MANUAL AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
Regulatory Informaon
FCC Informaon
Please take attenon that changes or modication not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
FCC compliance: This equipment has been tested and
found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protecon
against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instrucon manual, may cause harmful interference to
radio communicaons. Operaon of this equipment in a
residenal area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
FCC Condions
This device complies with part 15 of the FCC Rules.
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon.
EU Conformity Statement
This product and if applicable the - -
supplied accessories too are marked with
"CE" and comply therefore with the
applicable harmonized European
standards listed under the Low Voltage Direcve
20 /35/EU, the EMC Direcve 201 30/EU,14 4/ the RoHS
Direcve 2011/65/EU.
20 2/1 19/EU (WEEE directive): Products
marked with this symbol cannot be
disposed of as unsorted municipal waste in
the European Union. For proper recycling,
return this product to your local supplier
upon the purchase of equivalent new
equipment, or dispose of it at designated collecon
points. For more informaon see: www.recyclethis.info.
2006/66/EC (baery direcve): This product contains a
battery that cannot be disposed of as
unsorted municipal waste in the European
Union. See the product documentaon for
specic baery informaon. The baery is
marked with this symbol, which may
include leering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the baery
to your supplier or to a designated collecon point. For
more informaon, see: www.recyclethis.info.
Industry Canada ICES 003 Compliance-
This device meets the CAN ICES 3 (A)/NMB 3(A) - -
standards requirements.
Warning
This is a class A product. In a domesc environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
Safety Instrucon
These instrucons are intended to ensure that user can
use the product correctly to avoid danger or property
loss.
The precauon measure is divided into “Warnings” and
“Cauons”.
Warnings: Serious injury or death may occur if any of
the warnings are neglected.
Cauons: Injury or equipment damage may occur if any
of the cauons are neglected.
Warnings
In the use of the product, you must be in strict
compliance with the electrical safety regulaons of
the naon and region.
Input voltage should meet both the SELV (Safety Extra
Low Voltage) and the Limited Power Source with 12
VDC according to the IEC60950 1 IEC62368 1 -and -
standard. Refer to technical specicaons for detailed
informaon.
The socket-outlet shall be installed near the
equipment and shall be easily accessible.
An all pole mains switch shall be incorporated in the -
electrical installaon of the building.
Do not connect mulple devices to one power
adapter to avoid over heang or a re hazard caused -
by overload.
Make sure that the plug is rmly connected to the
power socket.
If smoke, odor or noise rise from the device, turn off
the power at once and unplug the power cord, and
then contact the service center.
Never attempt to disassemble the camera by
unprofessional personal.
Cauons
No naked ame sources, such as lighted candles,
should be placed on the equipment.
Install the equipment according to the instructions in
this manual.
To prevent injury, this equipment must be securely
attached to the oor/wall in accordance with the
installaon instrucons.
Do not drop the camera or subject it to physical
shock.
Do not touch senor modules with ngers.
Do not place the camera in extremely hot, cold (the
operang temperature shall be 40°C to 60°C), dusty -
or damp locaons, and do not expose it to high
electromagnetic radiation.
If cleaning is necessary, use clean cloth with a bit of
ethanol and wipe it gently.
Warnings Follow
these safeguards to
prevent serious injury
or death.
Cauons Follow these
precauons to prevent
potenal injury or
material damage.
Do not aim the camera at the sun or extra bright
places.
The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
Do not expose the device to high electromagnec
radiaon or extremely hot, cold, dusty or damp
environment.
To avoid heat accumulaon, good venlaon is
required for the operang environment.
Keep the camera away from liquid while in use for
non water proof device.- -
While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
The beam of the light at the distance of 200 mm is
classied as Risk Group 1 (RG1). Possible hazardous
opcal radiaon emied from this product.
DO NOT stare at operang light source. May be
harmful to the eyes.
Wear appropriate eye protecon turn on the or
supplement light only at a safe distance (0.3 or in m)
the area that is not directly exposed to the light when
installing or maintaining the device.
1 Introducon
1.1 Product Features
The main features are as follows:
High performance CMOS sensor
OSD menu with congurable parameters
Smart light
3 axis adjustment-
Hybrid supplement light with IR and white light
1.2 Overview
1.2.1 Overview of Type I Camera
Bracket
Main Body
Lens
Power Cord
Video Cable
Switch Buon
Figure 1-1 Overview of Type I Camera
Note:
Press and hold the switch buon for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.
1.2.2 Overview of Type II Camera
Main Body
Switch Buon
Power Cord
Video Cable
Lens Microphone
Bracket
Figure 1-2 Overview of Type II Camera
Produkt Specifikationer
| Mærke: | Hikvision |
| Kategori: | Overvågningskamera |
| Model: | DS-2CE78K0T-LFS |
Har du brug for hjælp?
Hvis du har brug for hjælp til Hikvision DS-2CE78K0T-LFS stil et spørgsmål nedenfor, og andre brugere vil svare dig
Overvågningskamera Hikvision Manualer
10 Februar 2025
10 Februar 2025
10 Februar 2025
10 Februar 2025
10 Februar 2025
5 Februar 2025
5 Februar 2025
12 Januar 2025
12 Januar 2025
7 Januar 2025
Overvågningskamera Manualer
- Kodak
- ION
- Schwaiger
- HiLook
- INSTAR
- Epiphan
- Kramer
- Genie
- DVDO
- Sir Gawain
- Enabot
- D-Link
- ZKTeco
- Asus
- Binatone
Nyeste Overvågningskamera Manualer
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
