Hikvision DS-PM-RSO4-H Manual


Læs nedenfor 📖 manual på dansk for Hikvision DS-PM-RSO4-H (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 29 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Product Overview
The RS485 Output Expander provides 4 / 8 relays
with Form C (normally open and normally closed)
contacts that are connected to the Security Control
Panel via the control's RS-485 bus wiring. The
device address of the relay module can be set by
DIP switches for RS-485 communicaons.
Physical Interfaces
Order Models
DS- -RS04-H PM
RS485 4 Outputs
Expander
DS- -RS08-H PM
RS485 8 Outputs
Expander
Specicaons
Electrical
Power Consumpon
2W@12VDC
Environmental
Temperature
(Operang)
- to +55 10℃ ℃
Relave Humidity
10% 90% to
Relay Output
Contact Rang
220VAC@ 10A
Insulaon
resistance
1000M @500VDC
Cauon
Power o the control panel and set the DIP switch the expander before installing. es in
Do not set several expanders as a same address, or it may cause communicaon faults.
The available device address ranges from 0 to 31.
Power on the expan before powering on the control panel. der
The designated earth ground terminal must be terminated in a good earth ground.
DS- -R -H PM S04
DS- -R -HPM S08


Produkt Specifikationer

Mærke: Hikvision
Kategori: Ikke kategoriseret
Model: DS-PM-RSO4-H

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikvision DS-PM-RSO4-H stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Hikvision Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer